Bronze coating - Import export

Housing, plastic Contacts M8x1 gold-plated bronze. Contacts M12x1 Optaloy-coated brass. Version: Bush (female) Voltage: U max. 60 V Current: I max. 4 A Terminals: 3-pin (4-pin by M12x1) Security type: IP 67 Note: Plug connector for self-assembly with screw lock.

KEIPER synchronizing toothed shafts can be made of such diff erent materials as aluminum, steel or stainless steel. The fact that they can be produced with all pitches and designed according to your specifications and drawing ensures optimal solutions for all applications and any loads. Our synchronizing toothed shafts work together optimally with our extensive and complete range of timing belts. Together they are a perfectly matched system for your application. We have a large range of standard pulleys on stock, which can be reworked according to your specifi cations within a short time (e.g. bores and machining based on your drawings). Special surface coatings, e.g. such as hard coating, anodizing, zinc coating or bronzing, improve corrosion and wear resistance.

KEIPER synchronizing pulleys can be made of such different materials as aluminum, steel, stainless steel, gray cast iron or plastics. The fact that they can be produced with all pitches and designed according to your specifications and drawings ensures an optimal solution for any application. Our synchronizing pulleys work together optimally with our extensive and complete range of timing belts. Together they are a perfectly matched system for your application. We have a large range of standard pulleys on stock, which can be reworked according to your specifications. Special surface coatings, such as hard coating, anodizing, zinc coating, bronzing, improve the corrosion and wear resistance.

KEIPER timing belt clamping plates can be made of many different materials, e.g. aluminum, steel or stainless steel. Keiper can produce them in all pitches and designed according to your specifications and drawings. This means that you will receive the optimal solution for the intended application and load. Our timing belt clamping plates work together optimally with our extensive and complete range of timing belts: in other words, a perfectly matched system for your requirements. We also have a large number of standard aluminum clamping plates on stock, which can be reworked according to your specifications (e.g. bores and mechanical processing based on drawings). Furthermore, such special surface coatings as hard coating, anodizing, zinc coating or bronzing improve the corrosion and wear resistance.

Besides standart specifications we provide for Cut to Length Lines, with Our +Plus Lines We offer the Quality of Cutting with Accurate and Fast Cutting Speed even for Special Coils; Stainless Steel, Aluminum, Copper, Chrome Coated, Brass, Bronze… SACFORM’s Cut to Length Line+Plus Machinery is a certain solution for various Materials and Dimensions, for your special Projects with Heavy Industries.

Blow Mold, Stem Mold, Press Mold, Conical Mold, Spinning Mould, Mold Base, Plunger, Plunger Adapter, Bottom Plate, Mould Insert, 4-part Neck Ring. Machine Parts, Spares: Press Mold Holder, Blow Mold Holder, Mold Holder Adapters- Inserts, H-28 Neck Ring Holder(Basket), Mold Holder Hangers, Wear Plates, Push-up Mechanism and Components, Burners Graphite Funnels, and other various parts. Materials utilized: Stainless Steel, Steel, Bronze, Brass, Aluminum. Hard surfacing & Coatings: Colmonoy, Stellite welding coating. Material Heat Treatment and Hardening. Parts for Glass Industry, Shipyard, Marine Industry, Hydraulic Industry

Technical data In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. A waterresistant body with overload protection and a heating device against condensation water. Materials Carbon Steel, Aluminium Alloy, Bronze Body polyester coated Installation Vertical as the picture shows. All other installations only after request. Ambient temperature -20°C … +70°C Mounting pad DIN-ISO 5211 Standard voltages 24V DC (only up to NA028) 230V AC, 400V 3AC others on request Protection IP 67 ATEX-Protective class (Option) II 2G EEx d IIB T4 Cable entry 2 x M20x1,5 Protection devices 2 (OPEN/CLOSE) torque switches, Motor thermostat End stops 2 limit switches. Operating angle 90° ±5° Heater 20W Duty cycle 25 … 50% Standard equipment 2 additional limit switches, optical position indicator, manual override. Option Please refer to the data sheet The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Technical data In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. A waterresistant body with overload protection and a heating device against condensation water. Material Carbon Steel, Aluminium Alloy, Bronze Body polyester coated Installation Vertical as the picture shows. All other installations only after request. Ambient temperature -20°C … +70°C Mounting pad DIN-ISO 5211 Standard voltages 24V DC/AC, 230V AC others on request Protection IP 67 ATEX-Protective class (Option) II 2G EEx d IIB T4 Cable entry 2 x M20x1,5 Protection devices Motor thermostat End stops 2 limit switches. Operating angle 90° ±5° Heater 5W Duty cycle 75% Standard equipment 2 additional limit switches, optical position indicator with add. LED, manual override. Option Please refer to the data sheet The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Technical data In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. Features robust, water-resistant body made of aluminium optical position indicator, illuminated at end-positions compact body design manual override heating device against condensed water additional potential-free limit switches Material Carbon Steel, Aluminium Alloy, Bronze Body polyester coated Installation Vertical as the picture shows. All other installations only after request. Ambient temperature -20°C … +70°C Mounting pad DIN-ISO 5211 Standard voltages 24V DC 230V 50/60Hz ±10% tolerance others on request Protection IP 67 Cable entry 2 x M20x1,5 End stops 2 limit switches. Operating angle 90° ±5° Heater 3W Duty cycle 50% The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!