Die maintenance - Import export

This product holds your phone firmly in place while you drive allowing you to answer calls hands free and look at your GPS. It comes in a few different colors to suit your customer or brand’s needs.

NSPV miniature circuit breaker enclosure box Features: IP66 waterproof; Easy operation; Exquisite design; Highly waterproof and dustproof; Flame-resistant Material.

NSPV miniature circuit breaker enclosure box Features: IP66 waterproof; Easy operation; Exquisite design; Highly waterproof and dustproof; Flame-resistant Material.

CANopen to Modbus TCP protocol converter MG-CANEX is a protocol converter from CANopen to Modbus TCP. The device plays as the master in the CANopen network and it could be connected to the standard CANopen slave devices. The data transmission supports PDO, SDO, and error control supports Heartbeat. It Supports synchronous and asynchronous message sending. As a TCP server in Modbus TCP network, the device could be accessed by 5 TCP clients at the same time, and it could be connected to PLC controller and various kinds of configuration software. It could also connect optical transceiver and to realize long-distance data transmission.

Directly install on PPI communication port of PLC or EM277 communication port. No need for external power. Simultaneously connect S7TCP and Modbus TCP communication. Supports connections Max. of 32 hosts. Integrated Modbus TCP Server, Modbus data area can automatically or editorially mappingto S7-200 register. PPI to S7 Ethernet/Modbus-TCP converter. Supports Simens S7 Ethernet ommunication derive, including MicroWIN. Supports Win CC to directly connect S7-200 in TCP/IP. Support sone key reset.

Supports protocol conversion between Modbus and PROFINET Supports 2* RS485/RS232 or 1*RS422 Supports Modbus master or slave, and supports RTU or ASCII Supports working temperature of -40〜85°C Supports data area: 2 serial Modbus-RTU/ASCII to PROFIBUS gateway with Max. input 1440 bytesand Max. output 1440 bytes Supports one key reset

Supports protocol conversion between Modbus-RTU and Modbus-TCP Supports the connection of5 TCP clients simultaneously ODOT-S2E2 supports 2*RS485 ODOT-S4E2 supports wiring of RS485/RS232/RS422 Each serial port supports Modbus masterand slave ODOT-S2E2:2 serial Modbus-RTU/ASCII to Modbus-TCP Server gateway ODOT-S4E2:4 serial Modbus-RTU/ASCII to Modbus-TCP Server gateway Supports one key reset Gateway working mode: Transparent transmission, address mapping

AIOBOX-MT222F supports 16-channel digital output, High Level On, output voltage 24V DC; The module is with 16 pcs of DI&DO LED indicator; The module input channel can be wired with the 2-Wire or 3-Wire digital sensor; Each input channel of the module supports a 32-bit counter with the counting frequency <200Hz; The module has the functions of Thermal Shutdown and Overcurrent Protection; The internal Bus of the module and Field input adopts optocoupler isolation.

AIOBOX-MT124F supports 16-channel DI, supports source and sink two-way Input, input voltage 24v/0v. AIOBOX-MT222F supports 16-channel DO, high-level voltage is valid, output voltage 24v. AIOBOX-MT623F supports 8-channel DI, supports source and sink two-way input, input voltage 24v/0v. AIOBOX-MT623F supports 8-channel DO, high-level voltage is valid, output voltage 24v. LED indicators for 16 channel input & output. Two or three-wire digital sensor can be connected through input channel. 32-bit counter is supported by every input channel (frequency: <200Hz). Thermal shutoff and overcurrent protection. The bus inside the module and the field input are isolated by optical coupler

AIOBOX-MT124F supports 16-channel DI, supports source and sink two-way Input, input voltage 24v/0v. AIOBOX-MT222F supports 16-channel DO, high-level voltage is valid, output voltage 24v. AIOBOX-MT623F supports 8-channel DI, supports source and sink two-way input, input voltage 24v/0v. AIOBOX-MT623F supports 8-channel DO, high-level voltage is valid, output voltage 24v. LED indicators for 16 channel input & output. Two or three-wire digital sensor can be connected through input channel. 32-bit counter is supported by every input channel (frequency: <200Hz). Thermal shutoff and overcurrent protection. The bus inside the module and the field input are isolated by optical coupler.

AI0B0X Series Integrated IO AIOBOX-16/32 Al0BOX-16 supports single-deck mother board, 3 slots, slot 0 for communication adaptor, slot 1/2 for I/O module， Al0BOX-32 supports double-deck mother board, 5 slots, slot 0 for communication adaptor, slot 1/2/3/4 for I/O module Al0BOX-16 supports single-deck mother board, 3 slots, slot 0 for communication adaptor, slot 1/2 for I/O module; Al0BOX-32 supports double-deck mother board, 5 slots, slot 0 for communication adaptor, slot 1/2/3/4 for I/O module ; Slot 0 can be Modbus-TCP/Modbus RTU, PROFINET, EtherCAT, PROFIBUS-DP and CANopen; Slot 1/2/3/4 can be selected according to customer needs, Max. 32 channels;

This is a converter developed by Sichuan Odot Automation System Co., LTD between RS232/485/422 and TCP/UDP.This protocol converter can easily connect serial port devices to Ethernet and realize network upgrade of serial port devices. Protocol converter supports the function of "data transmission", which can be set as a client or a server. This function can easily realize the data communication between PLC, server and other Ethernet devices and the underlying serial port devices. Modules that support this feature are ODOT-S1E1 and ODOT-S2E1.

ODOT B series integrated I/O module consists of communication board (COMM board) module and extended IO module. The COMM board could select the corresponding bus module according to the communication interface of the controller system. The mainstream industrial communication protocols include Modbus, Profibus-DP, Profinet, EtherCAT, EtherNet/IP, CANopen, CC-Link, PowerLink, etc. The extended I/O module is divided into six categories: digital input module, digital output module, analog input module, analog output module, special module, and hybrid I/O module. The COMM board and extended IO modules could be freely combined based on site requirements. The integrated IO module could lower the cost when there are few data points.

CT-3238: 8-channel analog input /0&4-20mA/15-bit single-terminal Module features The module supports 8-channel current signal acquisition. The module can be configured for 0-20mA or 4-20mA current signal acquisition. The module supports 2-wire (non-loop output, external power supply required) or 4-wire current sensor input. The internal bus of the module and field input adopts magnetic insulation. The module input channel is connected to the field active analog signal current output sensor. The module channel equips with TVS overvoltage protection

IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-3804 CT-4234: 4-channel analog output /0&4-20mA/16-bit single-terminal Module features 2 output ranges can be set(0-20mA、4-20mA) The module internal bus and field output adopts magnetic insulation Single-terminal grounded together output mode

CN-8031 Modbus TCP Network Adapter supports the standard Modbus TCP Server Communication, and Ethernet supports the cascade function of dual-port switches.This adapter supports access to 5 Modbus TCP clients simultaneously, supports Modbus function code 01/02/03/04/05/06/15/16 /23, supports the Modbus application of watchdog, supports the process data maximum sum of input and output of 8192 bytes, and supports number of the extension IO module of 32. Module carries with the diagnostic function and it could monitor the communication status of IO module in real time.

Terminal modules are used to stabilize the internal bus communication. When the number of adapter extension IO modules reaches 16 or more and terminal modules should be required. When the number of adapter extending IO modules is less than 16, and the terminal module CT-5810 only for dustproof could be selected. The dustproof terminal could cover the internal bus and field power supply hardware of the last IO module. And terminal modules have no process data and configuration parameters.

CT-5710 Bus extended master module Module Description The bus extened master module is used to extend the bus.The bus extended master module has no process data and configuration parameters. Wiring Bus extended cable requires 5 core shielded cable, IBS+ and IBS- must use twisted pair. PE guarantees a reliable grounding and the total length of the bus extended cable should not exceed 10 meters.

CT-5321 Modbus Serial Port Module 1 Module Description The Modbus serial port module supports 1 channel RS485/RS232 /RS422 (optional), supports Modbus RTU/ASCII protocol, and supports master, slave and free transparent transmission mode. The serial Module CT-5321 could be applied with the adapter modules, so it could convert Modbus into other protocols such as Modbus TCP, Profinet, EtherCAT, EtherNet/IP, etc. When the module is used, serial port parameters and Modbus instructions should be configured in IO Config software. Devices with RS485/RS232/RS422 interface, which support modbus-RTU /ASCII, could be applied with CT-5321 to realize interconnection with upper PLC or upper computers. CT-5321 could be applied with devices such as: PLC, DCS, remote IO, VFD, motor start protection device, intelligent high and low voltage electrical apparatus, power measurement device, intelligent field measurement equipment and instruments, etc.

CT-4154 4 channels Voltage Output 0~5VDC/0~10VDC/±5VDC/±10VDC,16 bits Module features The module supports 4 channels voltage signal output Output range： 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, 16 bits The module carries with 4 analog output LED indicators Module output signal is single - ended common - grounded output

The module supports 8 channels voltage signal output Output range： 0~5VDC, 0~10VDC, ±5VDC, ±10VDC， 16 bits The module carries with 8 analog output LED indicators Module output signal is single - ended common - grounded output

CT-3713: 3-channel RTD-PT100 temperature acquisition module Module features The module supports 3-channel RTD thermal resistance (PT100) temperature acquisition The module could be connected to a 2-wire or 3-wire PT100 temperature sensor The internal bus of the module and field input adopts magnetic isolation The module carries with 3 analog input channel LED indicator 15-bit ADC resolution

CT-3158: 8 Channel Voltage Input 0~5VDC/0~10VDC/±5VDC/±10VDC, 12Bit Module features The module supports 8 channels of voltage signal input The module could collect 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, with a 12-bit resolution The module carries with 8 analog input channel LED indicator The module input signal is a single ended common grounding input

designed with a max of 64 modules, each I/O module is built with 16 channels and each have LED indicator. 2.supports an overall of 1024 I/O points, plug and play; 3. the I/O module back plate cable can be extended to 20 meters to be used in multiple panels; 4. WTP is from -40~85℃ with a warranty of 3 years; 5. high speed 12M back plate bus, with 64 digital quantity modules of a refreshing period at 2ms and analog quantity is 3.4ms; 6.Supports Modbus-RTU, Modbus-TCP, Profinet, Profibus - DP (DPV0), EtherCAT, Ethernet/IP and others up to 12 kinds of the main stream protocol

designed with a max of 64 modules, each I/O module is built with 16 channels and each have LED indicator. 2.supports an overall of 1024 I/O points and hot plug; 3. the I/O module back plate cable can be extended to 20 meters to be used in multiple panels; 4. WTP is from -30~75℃ with a warranty of 2 years; 5. high speed 12M back plate bus, with 64 digital quantity modules of a refreshing period at 2ms and analog quantity is 3.4ms; 6.Supports Modbus-RTU, Modbus-TCP, Profinet, Profibus - DP (DPV0), EtherCAT, EtherCAT and others up to 12 kinds of the main stream protocol. 7.Microchip solution: The chips are in vehicle grade.

The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO modules.

ODOT CN-8034 EtherNET/IP Network Adapter The CN-8034 Ethernet/IP I/O module supports standard Ethernet/IP protocol access. The adapter supports a Max. input of 504 bytes and a Max. output of 504 bytes. It supports 32 pcs of extended IO modules.

CN-8011 Modbus-RTU Network Adapter Module Overview CN-8011 Modbus-RTU network adapter supports standard Modbus-RTU communication, it supports function code of 01/02/03/04/05/06/15/16/23, and this device could monitor the IO module communication state in real time.

CN-8013 CC-Link Network Adapter Module Overview CN-8013 CC-Link network adapter supports standard CC-Link Ver.2 communication and it could monitor the communication status of IO modules in real time.