Chuck design - Import export

SPIROL offers a line of light duty and heavy duty Pin Driving Chucks designed to be used in SPIROL’s Manual Pin Inserters (Model PM, Model PMH or Model PMX). A Pin Driving Chuck may also be used in a drill press or arbor press with an adaptor. All Pin Driving Chucks are designed with spring tension at the tip to hold the pin securely in place prior to and during installation. The exposed end of the pin is then placed into the hole and the tool is advanced to complete the installation. The tools are supplied with a flush, above-flush or below-flush setting, depending on the application requirements.

Reliable and long life SPANNTOP nova – this development represents more than 30 years of SPANNTOP experience. It exploits all the advantages of the latest machine tools. The components are optimized for balance quality, and have an extended guide length. The clamping length of the workpieces is also significantly greater. This chuck is designed for maximum RPM and holding power at ideal concentricity. It is extremely rigid, precise, and has an extremely long life. Convenient change The position-oriented base end-stop of the »combi pull-back« and »combi deadlength« variants can be conveniently changed from the outside via three clamping screws countersunk in the chuck, and for standard chucks, provides excellent accuracy for face location combined with through-bore capacity. Chuck SPANNTOP nova: reliable and solid. The product is the result of more than 30 years of experience!

Compatible with large, readily available, range of jaws Two stage gripping gives clamping and seating of part Base jaws do not protrude on z axis Sealed body design Kitagawa chucks are manufactured from high grade alloy steel. The Kitagawa DL Series are the 1st chuck with two stage gipping action, firstly parallel clamping then pull back action for work seating.

Included in this range- Large bore 3 & 4 Jaw Self Centring Chucks- Ø500-1800mm steel body cast iron available Ø500-630mm centring tolerances according to UNE 15-430-94/ISO 3089:1991 norm 4 jaw independent chucks with one piece jaws- Ø500-1500mm cast iron or steel body solid reversible jaws direct mounting 4 jaw independent chucks with two piece jaws- Ø500-1500mm cast iron or steel body two piece jaws according to ASA norms jaws direct mounting heavy duty 4 jaw independent chucks- Ø600-2000mm heavy duty steel body two piece jaws according to ASA norms jaws long master jaws for added rigidity direct mounting 3 and 4 jaw self centring VTL chucks- Ø700-1800mm specially designed for vertical lathes steel body central cover and long base jaws covering the spindle nose of the lathe induction hardening of all gliding areas 3 jaw oil country self centring chucks- Ø500-1000mm forged steel body extra heavy duty American Standard, hard top and master jaws

Greatly expand the capability of your EDM machine Stainless steel construction Sealed and fully submersible Light weight and compact The DM series of rotary tables are completely waterproof and are designed for EDM applications. They are built from stainless steel and can be completely submerged. The DME100 table has an a Fanuc absolute encoder to improve precision and is only available as a 4th axis. The DM100 is available with a Kitagawa controller or with a suitable motor to interface with a machine that has already been prepared for an additional rotary axis. Both rotary tables are compact and high precision and will greatly expand the capability of a spark or wire erosion machine. These rotary tables are available with specially designed submersible chucks and tailstocks. RAV specification comes with an external controller that functions off a spare M-Code; used for machines that do not have 4th axis preperation.

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge