Coated ball valves - Import export

In order to minimize downtime and to ensure maximum safety that calls for 100% system isolation, BORSIG offers bubble tight isolation and emergency shut-off valves that are tested to the limit to ensure performance and integrity even under the most challenging conditions. All of our isolation and emergency shut-off ball valves are coated application-specific for enhanced erosion and corrosion resistance to even withstand acids or caustics.

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Material: custom size: according to drawings Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

We manufacture rough or fully machined body and flange for 3 pieces ball valves in : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request

We manufacture rough or fully machined ball and ball trunnion bearing for trunnion mounted ball valve : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request

These are products which allow liquid to flow at flow direction and used for preventing flow at reverse direction. It prevents fluid back flow when pump is out of service in pump plants. Ball is closed by its own weight or counter force. Check valves are mounted considering the fluid flow direction. Ball system deforms late with respect to flap system. In the event that it is deformed , upper cover is opened and ball is removed and new one is installed and maintenance of checkvalve is made easily. It can be used easily in drinking water plants and fluids which are free of acid.

Desing Size : VARNASAN Connection: DIN 259 BSP ve NPT Actuator Adaptation : ISO 5211 Technical Features Working Pressure : PN16 - PN40 Working Temperature: -300C / + 1800C Usage: Actuator connected and handle option Certificate CE0036, TS EN 10204 3.1 Application Corrosive fluid (acid, base), pharmaceutical raw materials, food, plastic etc.

Design Size : Varnasan Connection : EN 1092-1 Actuator Adaptation : ISO 5211 Technical Features Working Pressure : PN16, PN40 ops. Working Temperature : -300C / + 1800C Usage : Actuator connected and handle option Certificate CE0036, TS EN 10204 3.1 Option Firesafe, direkt actuated connection option, jacket coupling 1/2” ve 3/4” flanged, threaded Application Corosive fluids (acid, base), pharmaceutical, food, chemical, plastic

Suitable for liquids and gases with mechanical impurities – solid particles with sizes not exceeding 0,5 mm (e.g. water, steam, gas, oil, crude oil, acid, alkali etc.). • DN 10 – DN 150 • PN 16 – PN 250 • NPS ½″ – NPS 6″ • Class 150 – Class 1500

Stainless Steel and Carbon Steel Monoblock Ball Valves Design Size : Varnasan Connection : EN 1092-1 Actuator Adaptation : ISO 5211 Technical Features Working Pressure : PN16, PN40 ops. Working Temperature : -300C / + 1800C Usage : Actuator connected and handle option Certificate CE0036, TS EN 10204 3.1 Option Firesafe, direkt actuated connection option, jacket coupling 1/2” ve 3/4” flanged, threaded Application Corrosive fluids (acid, base), pharmaceutical, food, chemical, plastic

Design Size : DN15-DN125 > F1 >EN 558-1 DN150-DN200 > F5 > EN 558-1 Connection : EN 1092-1 Actuator Adaptation : ISO 5211 Technical Features Working Pressure : PN16, PN40 ops. Working Temperature: -300C / + 1800C Usage: Actuator connected and handle option Certificate CE0036, TS EN 10204 3.1 Application Hot water, cold water, compressed air, fuel oil, ceramic etc.

Design Size : DN15-DN125 > F1 >EN 558-1 DN150-DN200 > F5 > EN 558-1 Connection : EN 1092-1 Actuator Adaptation : ISO 5211 Technical Features Working Pressure : PN16, PN40 ops. Working Temperature: -300C / + 1800C Usage: Actuator connected and handle option Certificate CE0036, TS EN 10204 3.1 Application Corrosive fluid (acid, base), pharmaceutical raw materials, food, plastic etc

Our Products are ; Female x Female Mini Ball Valve (Economic Serie, Brass) Male x Female Mini Ball Valve (Economic Serie, Brass) Mini Ball Valves (Brass) Ball Valves (Brass) (Male - Female) Mini Ball Valve (Brass) (Female - Female) Mini Ball Valve (Brass)

Pneuflex mini ball valves (brass mini ball valves, stainless steel mini ball valves) are precisely made as per the international quality standards. The mini ball valve is widely appreciated by our clients for its unique features like functionality and durability, free from resistant and long lasting features.

Ball valve for high temperatures up to +500°C suitable for steam, oil, water, gas, heat transfer fluids and other liquids and gases without mechanical impurities. • DN 10 – DN 100 • PN 16 – PN 160 • NPS ½″ – NPS 4″ • Class 150 – Class 900

Ball valve for high temperatures up to +500°C designed to redirect the service fluid flow. Suitable for steam, oil, water, gas, heat transfer fluids and other liquids and gases without mechanical impurities. • DN 10 – DN 100 • PN 16 – PN 160 • NPS ½″ – NPS 4″ • Class 150 – Class 900

Three-way ball valve designed to redirect or shut the service fluid flow. Various configurations and materials are available. • DN 10 – DN 150 • PN 16 – PN 250 • NPS ½″ – NPS 6″ • Class 150 – Class 1500