Cold-formed steel profiles - Import export

Omega sections characterised as ΩTR60, ΩT110, ΩTR160, ΩTR210, ΩTR260; Profiles sold in EN 10346 steel: Hot-dip galvanised Z:200, 275 | Zin+Mag:175, 250; Drilling is carried out according to the position indicated by the customer.

Prefabex steel frame homes are built inside a giant factory and then delivered to your location. They're made in cold formed galvanized steel profiles as the main bearing building structure that is built off site and assembled on site.

Steel homes using steel frame rely on the very latest and highest quality constructing technology. Made from cold formed galvanized steel profiles as the main bearing building structure. The steel profiles are specially shaped through roll form machines to give different building elements such as wall panels, roof structure, joists, flooring chassis and ceiling panels.

Load capacity: 125 kN test load EN 124 when completely filled with concrete C35/45 (EN 206-1). Material: In Type BV-RA frame, cover and cross-beam in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. In Type BVE-RA frame, cover and cross-beam made of grade 304 stainless steel (on request also available in grade 316 stainless steel). EPDM seal. Features: Smell proof, largely water-tight multi-part cover (Not guaranteed to be completely water-tight). The cross-beams can be removed without tools, to give clear access to the entire duct. This gives clear access to the duct when retrofitting pipes or during repair work. Versions: In addition to the standard cover height (approx.50 mm), a deep cover version (approx. 100 mm) is available. Ideal for infill with paviors. The Lift-Off opening system: Every HAGODECK Type BV(E)-RA cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the...

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Fire protection panel on stainless steel Z-brackets, fire-resistant seal. Features: Accurately-manufactured smell proof access cover. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. Fire test certificate: The Austrian test certificate issued by the Institute for Fire Protection Technology and Safety Research (IBS) confirms that HAGODECK Type BV-F90 steel resists a fire for 90 minutes and thus significantly contributes to safety in the event of a fire. In accordance with EN 13501-2, Type BV-F90 is classified in fire resistance class REI 90 (a ↔ b). The Lift-Off opening system: Every HAGODECK Type BV-F90 steel cover comes with a set of lifting keys and precise installation instructions. After lifting out the cover, the fire protection panel can be removed using its grab handle. The shaft is...

Load capacity: 15 kN test load EN 124. Material: Frame made of 2 mm cold formed precision steel profiles. Hot dip galvanised. Durbar-plate cover. Features: Sealed cover, flat design. EPDM seal. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly for inspection chambers. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 6 cm Special sizes possible *S = available from stock *O = to order

BVHS-GD 400 STEEL GALVANISED BVEHS-GD 400 STAINLESS STEEL Load Capacity: 400 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206). Material: Frame and cover in 2 mm cold-formed precision steel profiles. Underside of cover reinforced with steel girder. The frame is reinforced with an additional frame. Hot-dip galvanised. Or grade 304 stainless steel. High-load hinges. High-specification double-piston gas struts. EPDM seal. Robust steel mesh reinforcement. Features: Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaran- teed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. The access cover has a water drain nozzle. There is the option (if required) to connect a drain...

Load capacity: 125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206). Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. High-load hinges. High-specification double-piston gas struts. Features: Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaranteed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: For installations which require access without particular effort. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paving stones or paviors etc. Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof (not guaranteed to be completely watertight). Virtually invisible when installed. EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GDZ cover can be opened and closed by one person. Central locking system: HAGODECK Type BV-GDZ steel cover is equipped with a central locking system. The cover can be opened from above using a special socket key and easily unlocked from underneath using the built-in handle. Safety device fitted to prevent the open cover from closing. Applications: For covers that need to be opened from above and below, quickly and without particular effort, e.g. in underground passageways, in underground railways, power stations, telecommunication or military facilities...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Load capacity: 125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C 35/45 concrete (EN 206) Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Sealed cover with 10 cm deep recess. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement, crosswise welded. Opening tool included. The Lift-Off opening system: Every HAGODECK Type BVH-maxi steel cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings and their surroundings. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 10.2 cm Installation height ≈ 12.5...

Load capacity: pedestrian Material: BV-shallow: frame and cover in 2mm cold formed precision steel profiles, hot-dip galvanised. BVE-shallow: frame and cover made of grade 304 stainless steel. Features: Sealed. Cover with an installation depth of only 5 cm. Particularly suitable for situations where greater installation depth is not available. Since the cover is shallower, this means that it is not so heavy when filled in - so less effort is required to lift the cover. The bottom of the cover is reinforced. EPDM seal. Tapered design allows easy opening. Steel reinforcement guarantees good adhesion between the concrete infill and the bottom of the cover. The Lift-Off opening system: Every HAGODECK Type BV(E) shallow cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For pedestrian use inside buildings and their surroundings. Installation: Installation must...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Standard version (not sealed). Type B should only be used where the “sealed” characteristic is not required. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement, crosswise welded. Opening: Every HAGODECK Type B steel cover comes with a set of lifting keys and precise installation instructions. Applications: Inside buildings over sealed inspection fittings or installations where a fully sealed cover is not needed. Installation: Installation must be carried out according to our instructions.

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Accurately manufactured sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where sealed covers are required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Special sizes possible *S = available from stock *O = to order

Modular containers are prefab structures made from light steel cold roll formed profiles that are joined together without welding. The walls and roof are insulated sandwich panels, and flooring is cement board with vinyl covering. modular containers come in a wide selection of plans to meet exact customer's needs. 10 units of 2.4x6 m containers can be transported in 40 HC shipping containers and one unit can be assembled onsite within one hour. Prefabex modular containers are an ideal solution for rapid living spaces. They come at standard dimensions such as 2.4x6 m and 3x7 m, they can also be customized to customer requirements and can be produced up to 4x12 m as one unit. Prefabex is a design-build offsite construction company and direct manufacturer of prefab containers from modular office containers, house containers, accommodation containers and restroom containers.

uPVC window reinforcements for all systems present on the market: Aluplast, Avantgarde, Brügmann, Decco, Deceuninck, Foris, Gealan, Inoutic, Rehau, Salamander, Veka, Wital, System Profine Our production is based on internal system procedures and the highest standards, which correspond to the requirements of European harmonized standards, including PN EN ISO 9001, PN EN 10162.

Usage Areas of MODSTEEL cold formed steel profiles; Warehouse Cladding Roof Truss Purlins Roof Profile Steel Building Profile Prefabricated Structures Containers Facade Works Frame (Carcass) Profile Wall Panels Veranda As Secondary Beam (supporting beam) Solar Power System Frames Light Gauge Steel Structures Why MODSTEEL profiles ; Competitive prices due to our workshops in different locations We have manufacturing flexibility for mass production Light Gauge Steel profiles are light engineering solutions compared with other alternatives Also you do not need paint or sand blasting since all our profiles are galvanized High Strength Highest corrosion resistant with high zinc cladding Best Quality Bolted connection advantage instead of welding connection Fast Assembly Advantages Easy Transportation After sales service Above all, we also create optimum solutions for our customers. In other words, cost effective, high quality, innovative with fast production speed.

The KEBAFORM range consists of individually designed engineering solutions resulting in the creation of innovative fasteners. This range fits various requirements, such as holder, stop bolt, distance sleeve, or adjustment element. Multiple phased cold-forming manufacturing processes create a unique and advantageous end product. This know-how and technology allow for a complex fastening element to be formed in up to six blows. PRODUCTION CAPABILITIES • 100% adaptable to any application • Minimization of materials used and inventory costs • Multi-functional use allows for large savings • Simple and efficient assembly • Alternative and replacement of turned parts

Special machines from Schmale Maschinenbau are equipped with an intelligent combination of technologies. The plant shown above is used to manufacture reinforcement items from solid material with a diameter of 20mm for the building industry. Servo-electric units such as bending slides, presses and finger benders are combined into customer-specific solutions for the production of individual items that can not be produced on standard machines. Schmale offers special machines for wire, tube and strip processing. You can watch various special machines for the production of different forming articles on our YouTube channel. https://www.youtube.com/channel/UCziuQiA3kXBVfH4ecLxQ2JA/videos

ECKOLD MF 500 - Allrounder-machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the tried and tested planishing hammer GL 2 and/or the Handformer HF 100. This Multiformer MF 500 EW consists of: English wheeling machine MF 500 Optionally available with a Handformer HF 100 for shrinking and/or a planishing hammer GL 2 (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!

ECKOLD MF 500 - Allrounder-machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the Handformer HF 100. This Multiformer MF 500 GL 2 consists of: English wheeling machine MF 500 + planishing hammer GL 2 Optionally available with a Handformer HF 100 for shrinking (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!

Universal forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming and straightening. The many special features of the Kraftformer KF 675 Magnum include stroke speed preselection and stored machining programmes for reproducible results. The Kraftformer KF 675 Magnum is capable of machining large steel components with a sheet thickness of up to 6 mm. A single Kraftformer is all you need to bend profiles, form sheet metal, produce new parts, and repair or rework workpieces with high precision. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). • Preselection of stroke speed • Adjustable return position • Stores up to 25 user-defined machining programmes • Reproducible results • Tool check • Electronic fault diagnosis • Servo motor-driven machine Max. forming capacity Steel 400 N/mm²: 6.0 mm Aluminium 250 N/mm²: 6.0 mm Inox 600 N/mm²: 4.0 mm

Forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming and straightening. The electronic display of the control system visualizes operations, fault tracing and indicated maintenance rates which ensure an optimum machine utilization. Storable processing programs allow repeatable results. This Kraftformer model is particularly recommended for the forming of sheet metal in the industrial metal construction sector as it is capable of machining large steel components with a sheet thickness of up to 3 mm. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). • choice of two preselectable stroke speeds • adjustable reverse position • 4 storable processing programs • repeatable results • electronic display/fault tracing Max. forming capacity Steel 400 N/mm²: 3.0 mm Aluminium 250 N/mm²: 4.0 mm Inox 600 N/mm²: 2.0 mm Contact us for a customised offer, tools included!

Machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the tried and tested planishing hammer GL 2. This Multiformer MF 500 MAX consists of: English wheeling machine MF 500 + Handformer HF 100 for shrinking For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Optionally available with a planishing hammer GL 2 (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!

ECKOLD Kraftformer KF 324 - Universal forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming and straightening. The cult-classic among the Eckold machines, the ECKOLD Kraftformer KF 324, is the cheapest motor-driven machine of the Kraftformer series. It is also known as ECKOLD Piccolo and has been designed for a long service life. Metal workers all over the world are delighted with this machine, as it works perfectly for many decades. With the ECKOLD Kraftformer KF 324, the press force is controlled by means of a hand wheel. This model is designed for the forming of steel sheets up to 2 mm in thickness. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 2.0 mm Aluminium 250 N/mm²: 2.5 mm Inox 600 N/mm²: 1.5 mm Contact us for a customised offer, tools included!

MF 800 - A complete workshop in one machine. The MF 800 MultiFormer is the ingenious multi-functional machine for stretching, planishing, driving and shrinking of metal sheets. This sophisticated wheeling machine is ideal for working on medium to large size work pieces: such as motorbike tanks, fenders, hoods, bonnets, door panels, etc. The compact machine comes fully equipped with castors so that it can be moved to any location in the workshop. • Large tool shelves • Wheels and wheel supports rotatable by 90° • Roller angle adjustable • Large selection of optional accessories • Quick tool change This Multiformer MF 800 KIT 1 consists of: English wheeling machine MF 800 Optionally available with a Handformer HF 100 for shrinking and/or a planishing hammer GL 2 (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 3.0 mm Inox 600 N/mm²: 1.0 mm Order now!