Concrete supports - Import export

Support for concrete slabs made by recycled antischock (HIPS) material. Using area: door and window support of construction. 120*80*3 mm to 120*80*16 mm

The ground mounting system on concrete supports is suitable for rocky terrain where it is not possible to install pile supports. Mounting on the supporting brackets is considered the most practical and economical for standard ground mounting. Moreover, the base does not have a harmful impact on the environment during its operation. All structures are resistant to loads and comply with all European and international standards. Galvanized coating Z600 extends the life of finished products by protecting the steel against corrosion.

For vertical connecting wire, chain, cable or other fastening supports to concrete or structural steel base materials. DH32: Asma Tavan Klipsi 32mm

E-LINE A series and E-Line Seismic suspension systems are used in buildings and factories; in concrete or steel structures to support the Busbar, Conduit and Cable Ladder etc. Service and lightweight suspension type variations are available according to the weight of the system to be supported.Together with the evolving installation, it offers optimum solutions for the installation of the support systems.

Cementing clout with high penetrating and insulating resin based on resinous latex in aqueous dispersion for external and internal, particularly suitable for the consolidation of insubstantial surfaces, To improve the adhesion of background plasters or mineral coatings or other mortars on new or old walls, on smooth or poorly absorbent surfaces, not uniform in absorption, concretes, weak, inconsistent or flour supports, on supports Base Chalk and Anhydrorene, on autoclavable cellular concrete blocks. Suitable for the consolidation of cementitious screets of low consistency. Packaging: Tanica 5-20 LT Color: Colourless Usage: Indoor/outdoor Dilution: 1:2 with clean water on concrete supports and on supports generally non-absorbent and/or particularly smooth and/or difficult to adhere • 1:4/1:5 with clean water on supports generally absorbent or on average Absorbent Yield: 8/12 sqm for LT, depending on the absorption of the support

Acrylic anti-mould mineral-based elastomeric hydropaint. made from selected quartz grains up to 50 microns, for decoration and internal and external protection of both new and old surfaces such as civil cement-based plasters, lime base, hydraulic lime base, Dehumidifier plasters, water-repellent plasters, mineral finishes, coat systems, premided coat plasters, concrete, old coatings and synthetic paints, stucco-trimmed walls, concrete, wood and Non-ferrous supports in general. Excellent for repainting. Specific to solve microcavillature in a preventive and resolutive way in case the phenomenon has already occurred.

Concentrated latex to be mixed with cementitious mortars to optimize workability, adhesion, flexibility and resistance. To be mixed with cement or cement and sand for the creation of jet shooting Boiacas, low and high thickness mortars, fluid mortars for filling cracks, to be mixed with "Intomasso" to make screed 0.5-3 cm thick and to generally confer Greater plasticity and resistance to cementitious mortars and plaster in general, to improve adhesion characteristics, flexibility and water resistance of adhesives. To be used also as cement clinging with high penetrating power and insulating for external and internal, particularly suitable for the consolidation of inconsistent surfaces or flour; To improve the adhesion of background plasters or mineral coatings on smooth or poorly absorbent surfaces, concretes, weak, inconsistent or floured supports. Suitable for the consolidation of cementitious screets of low consistency.

Wall bracket, width 210 mm, medium-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimensions: 210 x 70 mm Width: 210 mm Load capacity: 3 kN Make: OBO Bettermann Type: AW 30 21 FT Item no. : 6419720

Bracket, width 210 mm, light-duty version, folded, fastening on U suspended support or concrete wall. Corrosion protection: Strip galvanised according to DIN EN 10346 Dimensions: 210 x 65 mm Width: 210 mm Load capacity: 1.2 kN Make: OBO Bettermann Type: MWA 12 21S FS Item no. : 6424732

Wall bracket, width 210 mm, heavy-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimensions: 210 x 90 mm Width: 210 mm Load capacity: 5.5 kN Make: OBO Bettermann Type: AW 55 21 FT

Wall bracket, width 210 mm, light-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimension: 210 x 60 mm Width: 210 mm Load capacity: 1.5 kN Make: OBO Bettermann Type: AW 15 21 FT Item no. : 6420680 Make: OBO Bettermann Type: MWA 12 21S FS Item no. : 6424732

Hot rolled angle is in demand and applicable in mechanical engineering, construction and in everyday life. It is used to make Concrete supports; Mounts; Brackets; Arches; Ladders, stepladders; Wall partitions; Armored doors; Fences and fences; Sports equipment and exercise equipment; Children's playgrounds (playgrounds); Lifting equipment; Steel structures ; Parts and assemblies (mechanical engineering). By the type of execution, it is rolled with equal edges (equal flanges) GOST 8509, with different edges (unequal flanges ) GOST 8510 and bent. An equal flange metal corner is rolled at Ukrainian factories of the established length 6 and 12 meters, the geometry of the shelf is from 25 to 300 mm, the thickness of the edge is from 3 mm or more. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

This reinforced, stainless steel anchorage point - designed for concrete applications - does not create any tension in the substructure and is suitable for unprotected surfaces. It includes a base plate (150 x 150 mm) and a welded-on supporting tube (Ø 42 mm) for extra stability and is installed using the 4 anchor rods supplied. All you need is an installation depth of a mere 60 mm. EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Concrete ≥ C20/25 For installation depths ≥ 60mm Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

Thanks to its base plate (150 x 150 mm) and welded-on supporting tube (Ø 42 mm), this anchorage point offers a high level of stability when installed on a concrete structure - even with an installation depth of a mere 65 mm. This anchor - which has been awarded national technical approval - is easily installed using the 4 drive-in dowels supplied. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Concrete ≥ C20/25 For installation depths ≥ 65mm Incl. stainless steel installation set

This stainless steel anchorage point (Ø 16 mm) was specially developed with a larger base plate (370 x 370 mm) for installation in lightweight or porous concrete. The 8 anchor rods supplied in the package are cemented permanently into the concrete substructure using special adhesive. EN 795:2012, A + CEN/TS 16415:2013 Porous concrete ≥ P3.3 Add a supporting tube for usage as an end or corner post in a lifeline system Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

Is used for backbone and subscriber FOCLs as an addition to UK-N/U Multi Mounting Unit 150mm extension (for reinforced-concrete supports) when a FOC needs to be mounted on a support. Provides 150 mm FOC projection from the support.

Product of Encho Enchev - ETE creative series of play tables. The outdoor table tennis table is made entirely of high-performance concrete and a natural multicolored aggregate. The concrete is reinforced and fiber strengthened. The aggregate structure is made of natural marble or granite stones of a certain size. The table tennis table is standard in size and is conceptually available in blue or green on the game board. The table top and mesh are finely polished and the concrete legs supporting the structure are embossed. All concrete surfaces have protective coating, which makes the product even more resistant to aggressive weather conditions and reduces the deposition of dirt. The metal elements used to secure the table top to the legs are galvanized and powder coated, and all other connecting components are made of stainless steel. Ping-pong table suitable for any home or garden. A product that is timeless.

FIX-PA Precast Concrete supports system is specially designed for the secure and fast installation of prefabricated concrete panels onto load-bearing structures