Covers for welding - Import export

The FX 100 is specifically designed to weld Flexible reinforced ducting or tubing. This machine will weld reinforced tubes from a 2 inch diameter to a 48 inch diameter. The FX 100 can also easily add a wear strip to the outside. SPECIFICATIONS, FUNCTIONS AND BENEFITS The system includes One motorised unwinder for the reinforcement wire (1mm to 3mm diameter) One unwinder for the hose tape One unwinder for the cover tape One hot air welding machine with two heads One set of tooling to preform the steel wire in the hose One set of tooling (Diatrol) to make the diameter hose One set of welding guides One conveyor to support the finished hose

The TG Series of Geo and Cover fabricating machines are designed to eliminate excessive fabric handling. The TG series will efficiently produce almost any size Geo Liner or Cover. By using our exclusively designed welding and pulling system, the TG3600 will dramatically reduce labor and increase production. Because we use your floor as our welding surface, the TG3600 only takes up limited floor space. No pre pulling, no folding, no excessive handling.The model TG3600. FEATURES, FUNCTIONS, & BENEFITS Throat capacity available in 3.65M (12ft) Cradled unwind stand Material fabric clamp Adjustable operator control platform Track assembly for up to 76.2M (250ft) of travel included Hot air heat system Multi color fabric requires 2 unwinds

Welding Machine Metal Cover

Laser cutting welding stainless steel 304 sheet metal cover for machinery parts

Laser cutting welding stainless steel 304 sheet metal cover for machinery parts

The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available

770 Liter Hot Dip Galvanized Waste Container (Dome Lid Model)Body 1.50 mm. It is formed by bending and pressing as a single piece of sheet metal and its strength is increased. Base corners have radius. The assembly of the body sheet and side sheets is made by pressing 20.00 mm on the edges of the side sheets. It is mounted externally to the body sheet with a wide bent protrusion or lip and is completely welded, including the radii, without interruption.The body weld and other welds were welded without slag using the gas arc technique.The body mouth is completely surrounded by a pipe profile.Lift arms and cover connection 2.50 mm. It is welded onto the sheet metal apparatus and screwed onto the body.Lift arms are manufactured in accordance with EN standards. Cover arms 3.00 mm. is.Cover 1.40 mm. It is manufactured from sheet metal as a system that can be opened around its own axis.

A full automatic packaging machine that fills in plastic containers and thermally welds them. It consists of five work stages that start with pulling the empty containers, then packing, then coverings, then welding and taking out. Suitable for medium products, with a production capacity of 1500 packages per hour.

An automatic filling and packaging machine that operates in a circular system to fill liquid or semi-liquid materials with plastic containers of different sizes and shapes on demand. It consists of five work stages that start with pulling the empty containers, then filling them, then placing the covers, then welding and taking out through the conveyor belt. It is suitable for high and medium production with a productivity of 3000 packages per hour.

an automatic filling and packaging machine that operates in a circular system to fill liquid or semi-liquid materials with plastic containers of different sizes and shapes on demand. It consists of five stages of work, starting with pulling the empty containers, then filling them, then placing the aluminum or nylon cover, then welding with cutting and taking out through the conveyor belt. It is suitable for medium production with a productivity of 1500 packages per hour.

2.5mm Galvanized sheet body Electrostatic Powder Painted Covers, Free Standing Modular Cabin, Monoblock Welded Cabin, Stainless Steel Cabinets Panels with high protection class up to IP54 Distribution board Solution with different switchgear brands Engineering support Project-based special design and production Measurement and monitoring solutions Copper busbar transport accessories Cable carrying and marking accessories

Galvanized and powder-coated steel elements. Device permanently founded in the ground, concrete foundations with minimum class: C-25/30. Structural posts protected with welded steel covers; bolts and screws protected with plastic end covers. Screw connections protected against corrosion by galvanizing

Galvanized and powder coated steel elements. The device permanently sited in the ground with concrete min. C-25/30. Structural posts protected with welded steel covers; bolts and screws protected with plastic end covers. Screw connections protected against corrosion by galvanizing.

Ming Xiao Manufacturing Custom Welded parts From all kind of carbon steels,stainless steels,aluminum,copper,Brass. We can produce weled parts from GTAW (Gas Tungsten Arc Weld),SMAW (Shielded Metal Arc Welding), MIG Welding (melt inert-gas welding),TIG Welding(Tungsten Inert Gas Welding) and laser welding for high quality required parts. Our Factory have may spot welding machines,butt welding machines, Argon shielded arc welding machine, Most welded metal parts use spot welding, the spot welding is the fastest way for small welding points, so say its spot welding. its can weld a net metal parts with many spots in consecutive. The welding services are widely use for welded brackets, welded wire frames, welded covers, welded studs on plates. Welcome contact us to discuss your welded metal parts.

The very different requirements created by diverse welding techniques mean that specific products have to be specially developed. The industrial fabrics we use have specific coatings that leave the cover flexible but resistant to spatter and weld splashes. Their para-aramid base has excellent mechanical strength. Production tooling protection is a necessity. ASP offers a wide range of protective covers for all types of welding guns, regardless of the welding technology involved (pneumatic, hydraulic or electric motor).

Plywood made of 100% birch or birch-olive wood, manufactured with waterproof weld, covered with dark brown phenolic film.

Option for black glass No. 9, 10 or 11

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Bright annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clearing with stainless steel ball valve output 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet Cooling belt H. 500 mm Level indicator with stainless steel protection Circular door diameter 400 mm positioned flush with the bottom of the shell DIN 15 tasting tap Ladder support bar Clock thermometer

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet

Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on STAUFF developments, made of thermoplastics, metals and non-ferrous metals. Accessories such as weld plates, cover plates, bolts as well as rubber inserts are available on request.

Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on STAUFF developments, made of Polypropylene, Polyamide and other thermoplastics. Accessories such as weld plates, cover plates, bolts as well as rubber inserts are available on request.

Covers the railing post weld plate Suitable for railing posts 40 x 40 mm Additional protection of the screw connetions

Covers the railing post weld plate Suitable for railing posts 40 x 40 mm Additional protection of the screw connetions

CT Model Load Cells The TS model load cell, which is produced from two different materials as stainless steel and alloy steel are produced especially for use in vehicle scales and wagon scales. The measuring zone, which is completely covered by laser welding, is in IP68 protection class, and works successfully in harsh industrial conditions. Specifications Capacity options from 10,000 kg to 50,000 kg Stainless steel / Steel IP68 Protection class High precision OIML, CE Certificated Apps Vehicle Scales Tank-Silo weighing systems