Differential pressure rate measurement - Import export

The pressure transducers of the PD-10L series have been developed to measure differential pressure. These OEM pressure transducers have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure.

The differential pressure transmitters of the PRD-33X series are designed for accurate measurements in low pressure ranges with very high overload on both sides. In addition to the differential pressure sensor, which may only be exposed to gases at its rear face, the devices have an additional absolute pressure sensor that measures the line pressure. Both measured values are output via the digital RS485 interface and are the ideal basis for cryogenic tank monitoring.

The differential pressure transmitters of the PD-39X series measure the pressure difference indirectly using two absolute pressure sensors. The dual-sensor design with numerical differential formation also outputs the line pressure values via the digital RS485 interface and guarantees a high overload resistance. The additional analog current or voltage output is primarily used to output the differential pressure range, which is freely rangeable within the line pressure range.

The pressure transducers of the PD-10LHP series have been developed to measure differential pressure. These OEM pressure transducers have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure.

The differential pressure transmitters of the PD-33X series are suitable for 'wet/wet' applications. They have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure small pressure differences even at an extremely high line pressure. The transmitters use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band.

The series 6 pressure transducers are based on selected pressure transducers that are equipped with a pressure connection.

The low-cost OEM pressure transducers of the 6M series are based on a piezoresistive measuring cell with a brazed metal diaphragm in a brass housing.

The series 13 pressure transducers have internal water cooling and are suitable for use in media temperatures of up to 350 °C. Typical applications include superheated steam circuits, engine test benches or chemical process monitoring.

The low-cost OEM pressure transducers of the 6S series are based on a piezoresistive measuring cell with a brazed metal diaphragm in a steel housing.

The differential pressure transmitters of the PD-23 series are designed for industrial applications and are supplied with a G1/4 internal thread as standard. They are based on a fully analog circuit. The PD-23 transmitters have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure.

The capacitive pressure transmitters of the PD-41X series are designed for measuring differential pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output.

The DMD 331 is a differential pressure transmitter for industrial applications and is based on a piezoresistive stainless steel sensor, which can be pressurized on both sides with fluids or gases compatible with SST 1.4404 and 1.4435. The compact design allows an integration of the DMD 331 in machines and applications with limited space. The DMD 331 calculates the difference between the pressure on the positive and the negative side and converts it into a proportional electrical signal. Features: — differential pressure 0 ... 20 mbar up to 0 ... 16 bar — accuracy: 0.5 % FSO — 2 piezoresistive stainless steel sensors — differential pressure wet / wet — permissible static pressure -one sided- up to 30 times of differential pressure range — compact design — mechanical robust and relieable at dynamic pressures as well as shock and vibration

Features: — differential pressure 0 ... 1 bar bis 0 ... 70 bar — display mode selectable: P+, P-, ∆P — display and pressure ports rotatable — 2 piezoresistive stainless steel sensors

The DMD 341 is a differential pressure transmitter for non-aggressive gases and compressed air. Because of its compact and robust aluminium housing it is suited for machine and plant engineering. Basic element is a piezoresistive stainless steel silicon sensor, which features high accuracy and excellent long term stability. In combination with our display and switching unit ASM 430 the user has a 4-digit LED-display for representing the differential pressure as well as up to 2 freely configurable contacts. Features: — differential pressure 0 ... 6 mbar up to 0 ... 1000 mbar — accuracy: 0.35% / 1% / 2% FSO — piezoresistive silicon sensor — compact and robust aluminium housing — suited for non-aggressive gases and compressed air — current and voltage output signals in 2- and 3-wire systems Optional Features: — display and switching module with up to 2 contacts — customer specific versions

The pressure transmitter DMK 456 has been developed for measuring the pressure in systems and the level in tanks and is as a consequence certificated for shipbuilding and offshore applications. Due robust stainless steel field housing and the possibility to use the device in intrinsic safe areas (temperature class T6) enable to measure the pressure of aggressive gases and fluids under extreme operating conditions. The basis for the DMK 456 is a capacitive ceramic sensor element designed by BD\SENSORS, which offers a high overload resistance and medium compatibility. Features: — nominal pressure: 0 ... 40 mbar up to 0...20 bar — accuracy: 0.25 % (opt. 0.1 %) FSO — shipping approvals: ABS, BV, CCS, DNV, GL, LR — IS-version (temperature class T6), Ex ia = intrinsically safe for gases — high overpressure capability — robust stainless steel field housing Optional Features: diaphragm AI2O3 99.9%

Features: — differential pressure 0 ... 6 mbar up to 0 ... 1.000 mbar — accuracy: 1 % FSO — piezoresistive pressure sensor

The pressure transmitter DPS 300 was developed for the differential pressure measuring for dry, non aggressive gases and compressed air and can be used for several HVAC applications. The DPS 300 is a multi range transmitter with up to three adjustable ranges. The device is equipped with a two-line LC display optionally and can simply parameterised. Values, status of the contact and the unit are shown on the display. Features: — differential pressure 0 ... 1.6 mbar up to 0 ... 1.000 mbar — accuracy: 0.5 % FSO BFSL — current and voltage output signals in 2- and 3-wire systems — adjustable ranges — adjustable damping Optional Features: — LC-display, two-line — automatic zero adjustment — contacts (only in combination with display) — square root extraction (only in combination with display)

The differential pressure transmitter DPT 100 has been especially designed for fast test processes in leakage and flow measurement, where a fast response time and high sampling rate are necessary. The compact design of the DPT 100 facilitates the use in standardised applications, e. g., and the installation in 19“ Rack. The DPT 100 with optionally RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Features: — differential pressure from 10 mbar up to 20 bar — static pressure max. 400 bar — accuracy: 0.1 % FSO — output signal 4 ... 20mA / 2-wire — aluminium housing, die casting Optional Features: — output signal RS485 with Modbus RTU protocol — several process connections

Resistance-free differential gauge for all air and non-corrosive gas installations Industrial grade die-cast aluminum case - Extreme temperature tolerance with o-ring seal - Easily accessible re-zero adjustment screw - 2% full scale accuracy* - 3 mounting adapters with screws included, other mounting accessories also available - 5 year warranty