Digital measuring equipment - Import export

The stainless steel probe DCL 551 with RS485 in-terface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data are transferred in binary form. DCL 551 has been designed for hydrostatic level measurement in sewage as well as for viscous and pasty media. Basic element is a robust and high overpressure capable capacitive ceramic sensor. Features — Nominal pressure: from 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 39.5 mm — excellent long term stability — especially for sewage, viscous and pasty media Optional features: — diaphragm ceramics Al2O3 99,9%

The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outside-diameter is only 22 mm for easy installation and back fitting in 1″ tubes or in cramped fitting conditions Features — Nominal pressure from 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0.35% (opt. 0.35 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 22 mm — highly appropriated for sewage water Optional features — drinking water certificate according to DVGW and KTW

The stainless steel probe DCL 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data are transferred in binary form. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Features — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0.25 % FSO — output signal: RS485 with Modbus RTU protocol — diameter diameter 26.5 mm — small thermal effect small thermal effect — high accuracy excellent accuracy — reset function Optional Features — drinking water certificate according to DVGW and KTW — different kinds of cables — different kinds of seal materials

The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections

Product Features: • The PC3 series of cylindrical filters combines a unique style of casing with good performance and flexible mounting, which makes this product very versatile. • The PC3 range offers very good filtering characteristics for both common and differential mode. • Typical applications include digital equipment, UPS, measuring and medical instruments. • All products are RoHS compliant, and approvals include UL and CSA.

Product Features: • The RIR series, available from Roxburgh EMC, is a screw fixing and twin fused, IEC inlet filter. • Available in three standard current ratings, 2A, 4A and 6A. Also available with increased x and y caps for optimum performance. They have good performance for both common mode and differential mode interference, with a metal case to give a good shielding effect. • Meets overvoltage category II of IEC 664 and complies with BS EN 60950. All products are RoHS compliant and approvals held include UL and CSA. • Typical applications are computers and computer peripherals, digital equipment, measuring instruments, monitors and display units, vending machines, gaming machines, printers and copiers.

Product Features: • The RIX series is a general purpose inlet filter, PCB mounted with fast-on tags for termination, giving good performance for both common mode and differential mode interference. • A standard IEC inlet, PCB mounted filter available from Roxburgh EMC, available in 3 standard current ratings, 1A, 3A and 6A. Rated at 250V. Also available with increased x and y caps for optimum performance. • Meets overvoltage category II of IEC664 and complies with BS EN 60950. All products are RoHS compliant and approvals include UL and CSA. • Typical applications are computers and computer peripherals, digital equipment, measuring instruments, monitors and display units, vending machines, gaming machines, printers and copiers.

Product Features: • The RIQ range is a snap in IEC inlet filter available from Roxburgh EMC, with single fuse and double pole switch. Also available with screw fix mounting option (RIP). • Available in 3 standard current ratings, 2A, 4A and 6A. Also available with increased x and y caps for optimum performance. They have good performance for both common mode and differential mode interference, with a metal case to give a good shielding effect. • Meets overvoltage category II of IEC664 and complies with BS EN 60950. All products are RoHS compliant and approvals held include UL and CSA. • Typical applications are computers and computer peripherals, digital equipment, measuring instruments, monitors and display units, vending machines, gaming machines, printers and copiers.

Product Features: • The RIP range is a screw fixing IEC inlet filter available from Roxburgh EMC, with single fuse and double pole switch. Also available with snap-in mounting option (RIQ). • Available in 3 standard current ratings, 2A, 4A and 6A. Also available with increased x and y caps for optimum performance. They have good performance for both common mode and differential mode interference, with a metal case to give a good shielding effect. • Meets overvoltage category II of IEC664 and complies with BS EN 60950. All products are RoHS compliant and approvals include UL and CSA. • Typical applications are computers and computer peripherals, digital equipment, measuring instruments, monitors and display units, vending machines, gaming machines, printers and copiers.

Product Features: • The RID series is a general purpose inlet filter with fast-on tags for termination, giving good performance for both common mode and differential mode interference. • A standard IEC inlet filter available from Roxburgh EMC, available in 4 standard current ratings, 1A, 3A, 6A and 10A. Rated at 250V. Also available with increased x and y caps for optimum performance. • Meets overvoltage category II of IEC664 and complies with BS EN 60950. All products are RoHS compliant and approvals include UL and CSA. • Typical applications are computers and computer peripherals, digital equipment, measuring instruments, monitors and display units, vending machines, gaming machines, printers and copiers.

Product Features: • The RIR series, available from Roxburgh EMC, is a screw fixing IEC inlet filter with single fuse. • Available in three standard current ratings, 2A, 4A and 6A. Also available with increased x and y caps for optimum performance. They have good performance for both common mode and differential mode interference, with a metal case to give a good shielding effect. • Meets overvoltage category II of IEC 664 and complies with BS EN 60950. All products are RoHS compliant and approvals held include UL and CSA. • Typical applications are computers and computer peripherals, digital equipment, measuring instruments, monitors and display units, vending machines, gaming machines, printers and copiers.

Product Features: • The RIS series is a screw fixing IEC inlet filter available from Roxburgh EMC, twin fused and double pole switch. • Available in 3 standard current ratings, 2A, 4A and 6A. Also available with increased x and y caps for optimum performance. They have good performance for both common mode and differential mode interference, with a metal case to give a good shielding effect. • Meets overvoltage category II of IEC664 and complies with BS EN 60950. All products are RoHS compliant and approvals held include UL and CSA. • Typical applications are computers and computer peripherals, digital equipment, measuring instruments, monitors and display units, vending machines, gaming machines, printers and copiers.

KHM 102 PROFESSIONAL Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 102 PROFESSIONAL S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, hollow hammer electrode with steel pins, ready to operate with measuring tables for wood in the carrying case.

KHM 101 JUNIOR Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 101 JUNIOR S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, shock electrode with steel pins, ready to operate with measuring tables for wood in the carrying case.

Digital wood moisture measuring equipment We are not only specialists for wood drying, but also your partner to contact for anything related to moisture measuring technology. Our modern, innovative company combines moisture measuring technology, control technology Our digital moisture measuring equipment with temperature compensation accurately measures: Sawn timber, chipboard, veneer, sawdust, wood chips, wood shavings, concrete, aerated concrete, tiles, screed, plaster, silica sand (sand up to a maximum of 20 %), lime plaster, concrete, paper, cardboard and also textiles and drying technology into a complete coordinated offer.

KHM 104 BAHO Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 104 BAHO (BUILDING MATERIALS / WOOD) as in the PROFESSIONAL carrying case S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, hollow hammer electrode with steel pins, ready to operate with measuring tables for wood and building materials, 100 mm brush probe, conductive paste and red building material plug.

KHM 103 EXPERT Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 103 EXPERT S91 digital moisture measuring unit with automatic temperature compensation (ATC) and M100B precision space and temperature measuring unit, batteries, measuring cable, temperature hand sensor, shock electrode with steel pins, brush probe, special board sensor, conductive paste, building material plug complete with measuring tables for wood and building materials in the carrying case.

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,

The high-performance optoNCDT ILR2250 laser distance sensor is used whenever large measuring ranges and high accuracy are required. The optoNCDT ILR2250 can be installed at distances up to 100 m, and even up to 150 m with a reflector film. This sensor impresses when measuring dark, structured and poorly reflecting surfaces, while providing stable measurement results to millimeter accuracy. The optoNCDT ILR2250 laser distance sensor is used in transportation, logistics and conveyance technologies as well as automation and the metals industry. This is where the sensor enables reliable measurement results even when it is, e.g., installed at a safe distance from heat emitting measuring objects. In addition, difficult-to-access places via mirrors or through glass sheets can be detected.

-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT