Electronic cards - Import export

Schneider Components are used in various different plants.

This external bypass module is intended for use with UPS FROSTYLE11, 13 kVA. In Normal Mode, the UPS connects to utility power through the bypass module and provides uninterrupted power to the load. In Bypass Mode, the load is switched to power directly from the external network, bypassing the UPS circuits. The UPS input and output are completely isolated from the loads and the mains. In this mode, the UPS can be safely (and without disconnecting the load) removed from the system for maintenance or replacement

The dry contact board (relay card) is used to provide the UPS peripheral monitoring interface. Contact signals can indicate the current status of the UPS. The appearance and pin numbering of the dry contact relay board may differ depending on the UPS model

SNMP card DL801 (art. CNDL801) is designed to monitor and control the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

The RC74201 dry contact card (art. CNRL004) is designed to monitor and control the UPS using potentialfree relay contacts. Monitoring is carried out through the relay contacts built into the card, which switch when the corresponding events occur in the UPS. The dry contact card allows you to remotely monitor the status of the UPS by receiving discrete signals when the relay is activated. The relay contacts are not galvanically connected to the electrical circuits of the UPS. An external power supply must be used to obtain the required signals. It also provides the ability to remotely shutdown the UPS by sending a signal to the corresponding port. The use of relay contacts allows the UPS to be integrated into local dispatch systems at customer sites.

SNMPcard DA807 (art. CNDA807) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin USB port allows you to connect external optional peripherals.

SNMP card DL802 (art. CNDL802) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

External SNMPcard DY522 (art. CNDY522) is designed for monitoring and controlling the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. An external power supply is supplied with the card.

External SNMPcard BY506 (art. CNBY506) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin additional ports allow you to connect external optional peripherals. An external power supply is supplied with the card.

SNMPcard CY504 (part no. CNCY504) is designed for monitoring and controlling the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols.

SNMPcard DA806 (art. CNDA806) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin MiniUSB port allows you to connect external optional peripherals

SNMP card DY806 (art. CNDY806) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin MiniUSB port allows connection of external optional peripherals

SNMPcard DY801 (art. CNDY801) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols.

SNMPcard DJ801 (art. CNDJ801) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

SNMPcard BY505 (art. CNBY505) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin additional ports allow you to connect external optional peripherals.

Extender card for 19"-systems DIN 41612 C64 a+c Epoxy fibre-glass FR4 1.50 mm Single-sided 70 µm CU Solder stop mask Component print Microswitches soldered with two measuring posts for each continuous strip Signalling line pin 2 - 31 Large signalling line pin 1 + 32 Switching voltage 10 mV - 60 V Switching current 0.3 A at 24 V Rest current at 20° C max. 6 A Contact resistance 30 mOhm Extender card: 100% electronically tested Size 100.00 x 278.70 mm (132.50 x 330.70 mm with handle)

Extender card for 19"-systems DIN 41612 C64 a+c Epoxy fibre-glass FR4 1.50 mm Single-sided 70 µm Cu Solder stop mask Component print Removable short-circuit bridges and two measuring posts for each continuous strip Signalling line pin 2 - 31 Large signalling line pin 1 + 32 Switching voltage 10 mV - 60 V Switching current 0.5 A at 24 V Rest current at 20° C max. 2 A Contact resistance 20 mOhm Extender card: 100% electronically tested Size 100.00 x 278.70 mm (132.50 x 330.70 mm with handle)

From designing to realisation, we are in capacity to answer to your project integrated Electronic embedded, electrical harnesses or all product as you can find in our skills. - Electronic embedded - Tooling - Demanding environment - Test benches - Electronic card

2D barcodes have made their way to your Point of Sale (POS), appearing on everything from the items your customers are purchasing to printed and electronic coupons and loyalty cards. Your 1D scanner can’t capture the new 2D codes, leading to exceptions that slow down the check-out process and frustrate customers at that key last personal touchpoint in your store.