Results for
France
Cable fasteners: Stainless steel 1.4404 or PVDF. Hose: Plastic. Version: Cable gland: bright stainless steel, transparent plastic. Hose: coated Note: Washers supplied. EN 60423 metric thread. IP rating 66, 68 up to 15 bar, 69K. Tension relief corresponds to EU standard 62444. EHEDG certified. Seal insert ADI - free Temperature range: Stainless steel cable glands: -40 °C to +85 °C. Plastic cable glands: -20 °C to +85 °C. Hose: -20 °C to +95 °C.
Request for a quoteFrance
Steel cables, Winches, Hoists, Slings, Ropes, Buckets, Harnesses, Pulleys ..
Request for a quoteUnited Kingdom
Individually numbered hexagonal Keytracker 1.5mm secure seal for attaching equipment or keys to the Keytracker system
Request for a quoteGermany
Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.
Request for a quoteGermany
Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification
Request for a quoteFrance
Stainless steel 1.4305 Lamellar insert polyamide (PA6). Seal ring CR / NBR. O-ring NBR. Version: Bright. Note: DIN EN 60423 cable glands with metric thread. Sealing and tension relief are provided by inset fins and a sealing washer. Rating IP68 (5 bar for 30 min). Cable glands are used for connecting fixed calbes and lines in housings, distributors and switch boxes. Temperature range: Static: -40 °C to +100 °C. Dynamic: -20 °C to +100 °C.
Request for a quoteSpain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression and torsion springs that are mainly submitted to high static strains and to medium levels of dynamic strains. EN 10270-1 ASTM A 228
Request for a quoteSpain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to high static stresses or moderately dynamic stresses.
Request for a quoteSpain
POSSIBILITY OF SUPPLY: Whitout coating: Annealed, N/A and Hard Drawn ( Grey) Whith coating: Annealed Galvanised and Hard Galvanised ( Grey) TYPES OF COATING: Galvanised - Reinforced galvanised - ZA - Reinforced ZA
Request for a quoteSpain
APPLICATION: Wire for alloy and non-alloy steel spring for use with severe dynamic stresses, such as prings for valves. According to EN 10270-2
Request for a quoteSpain
APPLICATION: Wire for alloy and non-alloy steel spring for use with severe dynamic stresses, such as prings for valves. According to EN 10270-2 and ASTM A 877
Request for a quoteSpain
APPLICATION: Steel wire for spring with medium factigue levels, such as that required for alloy and non-alloy steel clutch springs According to EN 10270-2 and ASTM 2 A 1000-5 Grade D
Request for a quoteSpain
For final diameters between 1.50 mm and 8.00 mm and for the VD-type wires, the wire can be trimmed or straightened (shaved). According to EN 10270-2 and ASTM A 1000-5 Grade A
Request for a quoteSpain
For final diameters between 1.50 mm and 8.00 mm and for the VD-type wires, the wire can be trimmed or straightened (shaved). According to EN 10270-2 and ASTM A 401
Request for a quoteSpain
APPLICATION: Suitable for static applications. According to EN 10270-2 and ASTM A 229
Request for a quoteSpain
APPLICATION OF HARD DRAWN STEEL WIRE Compression springs, extension springs,and torsion springs for high and dynamic stresses. According to DIN 17223:1964-1
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteSpain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteSpain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteSpain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteSpain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high dynamic stresses. Also for wire shapes that require severe bending. According to EN 10270-1 and ASTM A 227
Request for a quoteSpain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteSpain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high static stresses or, rarely, dynamic stresses.
Request for a quoteSpain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are chiefly subjected to low static stress. According to EN 10270-1 and ASTM A 227
Request for a quoteSpain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteSpain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteSpain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteSpain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteResults for
Steel cables - Import exportNumber of results
40 ProductsCompany type