Double butterfly valves - Import export

MAIN FEATURES - Nominal pressure: 10 bar, 16 bar or 25 bar - Permissible operating pressure: 16 bar - Operating temperature: -10°C to +50°C - Blue (Ral 5015) epoxy powder coating (average 250 microns) - Operated by multiturn gearbox with handwheel - FSH closing (clockwise closing) - Complies with standard EN 593 - ISO PN10 and PN16 drilled flanges up to DN150, from DN200, ISO drilling PN10 or PN16 to be specified - A.C.S. certified product

DOUBLE FLANGED, ENGINE COMPATIBLE BUTTERFLY VALVE

Air accumulations which occur particularly in pump outlets when water is delivered to pump outlets and pipe lines and makes water flow area narrower and causes decrease in capacity. Double ball vacuum lifters are used for preventing this adverse issue and in locations where high efficiency is required. Air which occurs when water is delivered to system firstly fills into vacuum lifter and discharged through holes which are located at inner side covers. Then water fills into vacuum lifter and lifts ball up and holes are closed and sealing is maintained.

ENGİNE CONTROLLED DOUBLE ECCENTRIC BUTTERFLY VALVE

An economical ERS solution incorporating butterfly valves and the unique MIB Internal Release Coupler (MP Type). The Coupler represents the latest safety system design available to the marine terminal industry. Suitable for installation on rigid loading arms or flexible hoses, the system is suitable for crude oil, ballast, fuel oils, non toxic petrochemicals and VOC service. Fully in accordance with OCIMF Recommendations 1999. Temperatures: Ambient, High Dimensions: from 6'' to 24'' Pressiure rating: ASME B16.5 Class 150, 300

Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron+ Nickel Coated / Handwheel : Ductile Iron+ Nickel Coated / Shaft : Stainless Steel / Gasket : EPDM-NBR-PTFE-VITON / Connection : Flanged (Wafer Type) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : HVAC Systems / Water Treatment Systems / Paper Industry / Fresh Water System

Body: ASTM B-536 Nylon- 11 Coated / Gear Box: ASTM A-536 / Disc: ASTM B-356 EPDM Encapsulated / O-Ring: EPDM / Handwheel: ASTM A-536 / ** Connection Type: Flanged or Grooved or Threaded / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** It is identified as a local control valve. It is used as a shut-off valve on water feed lines to disconnect (control) in-situ zones. A butterfly valve or rising stem valve is used to shut off or control. the position of all valvesused in fire systems should be visible and electrically traceable. Butterfly valves are of a gearbox handwheel type. The supervisory switch of a butterfly valve are located inside the valve and there is an on/off indicator on it. **** Application Areas:Residences / Hotels / Hospitals / Business Centers / Shopping Centers

Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron+ Nickel Coated / Handwheel : Ductile Iron+ Nickel Coated / Shaft : Stainless Steel / Gasket : EPDM-NBR-PTFE-VITON / Connection : Flanged (Lug Type) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : HVAC Systems / Water Treatment Systems / Paper Industry / Fresh Water System

ES-4212 HYDRAULIC CHECK BUTTERFLY VALVE

DISMANTLING JOINT