Drainage - Import export

The Medela Trolley is intended to be used throughout the hospital to hold up to 5 suction jars (PSU or PC with disposable liners). It is designed for indoor use. – Holds up to 5 suction jars/liners – Mobile with 5 castors (with brakes) – Dimensions: 85 x 60 x 60 cm

The exclusive MASTER 3 sound-insulating drain system from SANHA consists of high-quality three-layer pipes and modern fittings. The drain pipes are constructed with three perfectly matched layers that work together to meet all the demands that a drain system is subjected to in the construction of a modern house, apartment and industrial building. Each layer optimises the properties of the pipe: The smooth inner layer prevents encrustations and is partly responsible for the good sound insulation properties. The solid middle layer is extremely robust and the brown outer layer provides excellent impact resistance even at low temperatures. The sealing ring consists of styrene-butadiene rubber (SBR).

The Pipe Doctor range has been designed to offer professional repair without the need for excavation of the pipework, saving time, disruption and, of course, cost. Products available in kit form offer everything needed for a single repair, without waste or mess on site. The following kits are available: Pipe Doctor No-dig Repair (for repairs on straight pipes); Pipe Doctor Radius for the repair of swept bends; Pipe Doctor Lateral for the repair of broken junctions; and NEW Pipe Doctor Rapid, for faster repairs to straight pipes. Kit components can be purchased in bulk form, if preferred. To complement this professional product, training courses are provided.

Food supplement that purifies the organism, increasing the effectiveness of weight control diets. Stimulates liver function and regulates renal and digestive activity favoring the elimination of liquids and the bowel evacuation, guaranteeing at the same time a correct mineralization of the tissues. his high content in papaya makes it very interesting in the fight against cellulite. FOOD SUPPLEMENTS MANUFACTURERS SINCE 1983 Produced in a E.U. certificated laboratory. ISO 9001. Quality management certification.

The drainage membrane is a high-density polyethylene-based HDPE seal used in underground installations in construction or other areas to isolate moisture from the ground to the indoor environment. They are made in 400 grams and 500 grams.

Optigrun Drainage Gutters and Terrace Grids are used for draining surface water from roof outlets, draining water-bearing layers, draining driving rain from the facade, as collection channels for draining green roof areas and as branch canals between downpipes and roof outlets.

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.

Optigrun Drainage Material Perl 8-16 LA is used as a drainage layer beneath intensive green roofs without water accumulation and as pressure resistant drainage and equalization layer beneath paving.

Optigrun Drainage Material Perl 2-10 LA is used as a drainage layer beneath intensive green roofs without water accumulation, for pressure resistant filling of Drainage Boards and as pressure resistant drainage and equalization layer beneath paving.

Optigrun Drainage Material Perl 2/10 BT is used as an especially lightweight drainage layer beneath extensive and intensive green roofs and for pressure resistant filling of Drainage Boards on roof structures with low load reserves.

Optigrun Drainage Material 8-16 BS is used as drainage layer beneath extensive and intensive green roofs, for pressure resistant filling of Drainage Boards and as lightweight drainage and equalization layer beneath paving.

Optigrun Drainage Material Perl 2-10 BS is used as a drainage layer beneath extensive and intensive green roofs without water accumulation, for pressure resistant filling of Drainage Boards and as pressure resistant drainage and equalization layer beneath pathways.

Optigrun Protection and Drainage Board FKD 60BU under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5Under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5 Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Optigrun Drainage and Storage Board FKD 60BO under intensive roof greening in multi-layer construction and temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16Under intensive roof greening in multi-layer construction filled with Drainage Material Perl 8/16 Under temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16 Unfilled installation under intensive roof greening is possible with a substrate height of up to 400 mm in combination with Optigrün Filter Fleece FIL 300 (it is not possible for vehicles of any kind to drive over the unfilled Optigrün Drainage and Storage Board FKD 60BO) Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Optigrun Drainage and Storage Board FKD 40 is installed beneath extensive green roofs and single-layered intensive green roofs for drainage and water storage.

Optigrun Protection and Drainage Board FKD 25 plus is installed beneath traffic surfaces and pathways. Also suitable for inverted roofs.

Optigrun Protection and Drainage Board FKD 12UK under public areas on buildings used by vehicles. Suitable for inverted roofsOpen to diffusion Incl. PP thermally strenghended with 23 l/m² x s flow rate (GRC 4) On roof surfaces with a minimum of 2 % regular gradient of the sealing plane Prevents accumulation of water Without water reservoir function

Optigrun Protection and Drainage Board FKD 12 as a drainage element beneath traffic areas with car and truck usage, intensive green roofs, balconies and terraces.Incl. PP filter fleece with 23 l/m² x s flow rate (GRC 4) Incl. PE slip layer (friction coefficient <0,6) as first slip layer On roof surfaces with a minimum of 2 % regular gradient of the sealing plane Prevents accumulation of water CE-marked Without water reservoir funktion

Optigrun Protection and Drainage Board FKD 10GF under pavement areas used for walking, under vegetation areas with no need for a water reservoir but increased pressure load and vertically along ascending, filled structural components.Protection and Drainage Board incl. PP filter fleece with 100 l/m² passage capacity (GRC 2) Incl. PE film adhered on the reverse As drainage element under floor surfaces used on foot with increased frequency For vegetation areas with no need for a water reservoir but increased pressure load Vertically along ascending, filled structural components Prevents accumulation of water Without water reservoir function

Optigrun Protection and Drainage Board FKD 10UK as a drainage element under floor surfaces used on foot and under vegetation areas with no need for water reservoir but increased pressure load.Open to diffusion Incl. PP thermally strenghtended with 75 l/m² x s flow rate (GRC 2) On roof surfaces wiht a minimum of 2 % regular gradient of the sealing plane Prevents accumulation of water Without water reservoir functíon

Optigrun Protection and Drainage Board FKD 10 is used as drainage beneath frequently used pathways and on vertical building components. Incl. PP filter fleece with 75 l/m² x s flow rate (GRC 2) On roofs with a minimum of 2 % regular gradient of the sealing plane Prevents accumulation of water Without water reservoir function

To use for manufacturing of pouche bags for drainage.

With Thopaz+, Medela sets a new standard in chest drainage in terms of mobility, objective digital data and ease of use. Thopaz+ features the latest digital technology allowing healthcare professionals to make accurate decisions based on precise data and monitoring. • Electronically measures and records all key parameters used in chest drainage management. • Reduces patient length of stay in hospital and helps to control costs. • Improves patient satisfaction and comfort by providing full mobility with quiet pump operation. Ease of use streamlines surgical care for doctors and provide convenience for nurses and hospital staff. Thopaz+- IMPROVING OUTCOMES AND STREAMLINING CARE – CLINICALLY PROVEN

4 bevelled edges to limit the risk of falling very resistant thanks to its vinyl surface excellent grip thanks to its treadplate surface look model with yellow marking to delimit a safety zone thermal insulation relieves back and leg fatigue long lifespan and excellent shape memory thanks to its thick 100% closed cell nitrile foam high resistance to wear improves working conditions and productivity for people standing high performance antifatigue function for 3x8 work NT615 : High performance Colors: black (B) or black with yellow marking (BY)

Stackable box, solid waved bottom & ventilated sides PRODUCT INFORMATION Outside dimensions 500x300x180 Inside dimensions 461x265x175 Weight 1150 Volume 20,5 Quantity per pallet 104 Pallet size 1000x1200 Height pallet 2500 MOQ 500 Material: HDPE

Optigrun Drainage Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene.

Optigrun Intensive Substrate Urban Soil is used as a vegetation substrate for intensive multi-layered green roofs. Specifically designed for growing vegetables and berry bushes on garden roofs with 0 - 5° roof pitch.