Electrical drives - Import export

Muscular and skeletal problems are the most common reasons for people being unable to work, particularly if they have a job that frequently involves physically strenuous activity like pushing and pulling loads. The electric drive systems of the Blickle ErgoMove® series reduce these health risks considerably. The effort required for pulling and pushing is reduced by up to 100 %. The physical strain on the operator is decreased during internal material transport due to the considerably lower amount of effort required compared with manual operation. Equipment and transport units of any kind can be quickly and easily upgraded with a “plug & play” electric drive, steering and braking assistance. The modular sets include two fixed castors with electric drive, cockpit solutions with integrated controls and battery unit as well as all relevant safety features.

Efficient positioning, assembly and handling of workpieces are key components in many manufacturing companies to meet growing cost pressures. Replacing pneumatic cylinders with electric linear drives can save up to 90 % of energy consumption. In addition, there are numerous advantages in motion control. IAI has the world's largest portfolio of electric actuators with 24 or 230 volt stepper or servo motors. The electric cylinders perform linear, rotary or gripping movements and are characterised by the uniquely compact design including motor and encoder as well the high quality. In addition to the standard version, electric cylinders are also available for cleanrooms and as IP-protected models for dusty or wet production environments.

n the micro and micro-drive sector, IAI offers small mini slider types that easily replace pneumatic cylinders due to their identical design and simple control mode. They are suitable for mounting fixtures, workpiece positioning, table motion and many other applications. In the RCP3 series, the smallest models are available as a slider types with sliding spindle. The latest developments are the space-saving mini slider types of the RCA2 series with 24 V servo motor.

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Bearing block and carriage aluminium alloy. Guide column and threaded spindle stainless steel. Plain bearing for guide columns and spindle nut highquality special plastic. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Stainless steel hardened and ground. Threaded spindle with ball bearing. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Positioning stages for motorised adjustment and positioning tasks. The plain bearings and spindle nuts are suitable for dry running, however lubrication with a grease for plastic plain bearings is recommended. The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

Electric motors for high speed application (approx. 6.000 up to approx. 30.000min1) need to be designed with special concern for bearings, greasing and ventilation.

The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents. * Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc. * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents. * Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc. * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

Base and rotary table aluminium alloy. Hollow shaft stainless steel. Preloaded worm gear steel. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Rotary positioning stages for motorised adjustment and positioning tasks. The preloaded worm gear runs virtually playfree. The bearing of the worm shaft offers maximum radial rotational accuracy. Cables can be routed through the large bore in the hollow shaft. The adjustable positioning ring is used to determine the rotational reference point to the position of the assembled part. Proximity switches can be mounted with the optionally available sensor holder (21094). The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

age 1995 2 drilling heads sliding table electr. drive electr. foot switch underframe Ref: NA220154A Please ask for price. We ship and install worldwide!

width 60 cm age 1978 laminating machine electr. drive Ref: TR240096A Please ask for price. We ship and install worldwide!

age 1992 Book back nipping press electr. drive hydraulic pressing Ref: GA240098A Please ask for price. We ship and install worldwide!

age unknown wire stitching machine 1 sttiching head electr. drive incl. substructure Ref: GR230210A Please ask for price. We ship and install worldwide!

age 1985 7 drilling heads adjustable drilling head distance incl. substructure electr. drive electr. foot switch Delivery time: immediately from stock Ref: HA200365A Please ask for price. We ship and install worldwide!

age 1990 stapling machine 2 stitching heads electr. drive electr. foot switch incl. substructure Delivery time: immediately from stock Ref: NA230338A Please ask for price. We ship and install worldwide!

age 1990 paper driller 2 drilling heads sliding table electr. drive incl. substructure Ref: NA230337A Please ask for price. We ship and install worldwide!

age 1965 wire stitching machine 1 sttiching head electr. drive incl. substructure Delivery time: immediately Ref: GR230359A Please ask for price. We ship and install worldwide!

age 1960 eyeletting machine electr. drive food switch underframe Delivery time: immediately from stock Ref: HA220076A Please ask for price. We ship and install worldwide!

age 1995 4 drilling heads with automatic table move variable drill speed drill-underlay with cardboard electr. drive electr. foot switch incl. substructure Delivery time: immediatelly from stock Ref: HA230223A Please ask for price. We ship and install worldwide!

age 2000 table model 2 drilling heads electr. drive manual handle slide plate Delivery time: immediately from stock Ref: NA200211A Please ask for price. We ship and install worldwide!

width 68 cm age 1963 scoring and perforating machine electr. drive food switch incl. substructure Delivery time: immediatelly from stock Ref: BI230336A Please ask for price. We ship and install worldwide!

width 70 cm age 1963 scoring and perforating machine electr. drive incl. substructure food switch Delivery time: immediately Ref: PE230361A Please ask for price. We ship and install worldwide!

age 1960 wire stitching machine 1 sttiching head electr. drive food switch incl. substructure Delivery time: immediately from stock Ref: HO230121A Please ask for price. We ship and install worldwide!

age 2001 forklift high-lift truck electr. drive load capacity 1.000 kg 1.600 mm length of stroke Delivery time: shortly Ref: YA230070A Please ask for price. We ship and install worldwide!

age 1993 semi automatic hot stamping machine stamping area max. 125 x 280 mm electr. drive 1 foil feeder 1 heating plate automatic feeding unwinding system for round material / cans underframe Delivery time: immediately from stock Ref: GI200261A Please ask for price. We ship and install worldwide!

It relieves both human and the environment, and also preserves the valuable cutting tool. The ability to cut close to walls is outstanding. Thanks to its electric drive, joint cutting in indoor spaces is also among the special strengths of the COMPACTCUT 401 E, which is also characterized by maneuverability, durability and outstanding operator ergonomics. Whether cutting asphalt, concrete, making separation cuts, demolition work, tight construction sites or joint cutting in buildings - the powerful electric joint cutter with a 400-volt motor delivers excellent results under all conditions.

This powerful electrical drive is capable of handling up to 6.5 PS, making it the ideal choice for sawing concrete, stone, and masonry. The Coccodrillo 35 is safe to use in basements, rooms, and tight spaces, as it doesn't produce health-damaging exhaust fumes. It's easy to operate with a simple on-off switch and is electrically safe with PRCD protection. Additionally, the CARDI multi-function electronics provide soft start and overload protection, ensuring it complies with European and international regulations and standards.

The extremely space-saving design of our screen changer allows a lot of creative freedom, both with new machines and in the case of retrofitting, since the structure of the extruder platform only needs to be adjusted a little. The screen changer is installed instead of a connection piece and can be equipped with a hydraulic or electric drive. The simplest way, however, is to use a cordless screwdriver, which makes changing bits a quick and easy endeavor. Screen changers are available for all common throughputs.

Our mini cranes MRK can be used on any surface, fit into any van when folded and can be easily loaded and unloaded. Thanks to the crawler chassis, the assembly cranes can easily travel over uneven surfaces and even master extreme inclines. Thanks to the emission-free electric drive and the non-staining chains, they are also suitable for indoor use. They are operated directly or by radio remote control. Heavydrive offers you a wide range of these flexible all-rounders up to a maximum load of 10,000 kg for rent or purchase.