Electromagnetic equipment - Import export

The electromagnetic separators suspended on conveyor belts are the most effective equipment for removal of ferrous contamination from other nonferrous materials. Consist of an electromagnet which creates powerful magnetic fields that are generated by electrical coils which provide the required attractive force to separate the iron pieces. The self-cleaning of the equipment is performed by a resistant rubber belt and provided with transverse projections.This facilitates the transport of material and separation of the captured contamination throwing it to one side of the conveyor. The belt is mounted on a metal frame with pulleys that rotate with its bearings and is driven by an electric motor with a speed reducer; belt tensioning is done through a deflection drum. Its main mission is the protection of crushing and grinding equipment against damage and wear caused by the presence of iron pieces.The electromagnetic overbands separate ferrous particles from other materials in recycling pr.

The PANDYNO FPPD vertical inserters allow to an operator to fill and seal the packs avoiding the use of preformed bags. The operator must in fact insert the product to be packaged in the magazine tube, on which a few meters of tubular film have been previously loaded. The product goes down into the tubular film up to the support surface. The operator manually closes the sealing bar by applying a slight pressure on the bar. The welding machine in a single operation carries out the welding of the package, the cutting of the film and the welding of the bottom of the next envelope. This operation takes place using an electromagnetic blocking device. By equipping the bagging machine with several loaders, it is possible to increase the productivity of the machine. To avoid waiting times it is also possible to pre-load different magazine tubes so that they can be quickly replaced once the film is finished. The standard model can be placed on a bench and comes with a charger of your choice.

The bucket elevator is used for the vertical transportation of grains and powdered materials. This transportation is realized by the means of a belt with buckets. The bucket elevator consists of the top part, bottom part and elevator pipes. It is driven by a directly connected gear motor equipped with an electromagnetic brake. In case of a power failure or any breakdowns, the electromagnetic brake prevents the bucket elevator from rotating backwards and therefore damaging itself or the buckets. At the bottom cover, there is a pulley without drive and a tensioning mechanism. The speed guard installed at the bottom pulley informs the operator when the belt brakes.

— Degaussing of pipes and metal sheets — Automatic degaussing before welding — Dependable degaussing for better welding results through stable welding process without magnetic deflection, minimisation of finishing work — activgauss (10–250 A) – degaussing during welding: — Avoids moving up of magnetic field during the welding process in case of very long and strongly magnetised components — Portable and robust — Quick connection at the pipe by means of three load cables — Use at -25 °C to +40 °C with mains voltage tolerances of +/- 20% Advantages of degaussing: — No deflection of the arc by residual magnetism in the workpiece — Prevention of lack of fusion due to insufficient sidewall fusion — Minimisation of finishing work — Cost-efficient and high-quality results — Set: Degauss 600 degaussing machine, two 5-metre, 35 mm² load cables, one 20-metre, 35 mm² load cable, RT DGS1 remote control and 5-m connection cable

Fusing-Pressing Machines mod. EMS 120 Electronic control of whole equipment electromagnetic closing of plane, it guarantees accuracy of pressure automatic opening of the plane at the end of the planned working cycle "safe hands" safety system

The heat capacity measuring insert is intended for measurement of the heat capacity temperature dependencies in constant magnetic field. In this insert the adiabatic method is used. The inner sample holder is equipped with the resistive heaters, resistive temperature sensors and Hall sensor. The heat capacity measurement insert characteristics: - relative measurement accuracy of heat capacity: 3 %; - sample dimensions: a rectangular bar 4×5×2.5 mm; - temperature interval – from 80 to 370 K; - magnetic field interval – from 0.02 to 2 T.

The thermal conductivity measuring insert is intended for measurement of the thermal conductivity coefficient temperature dependencies in constant magnetic field using stationary method. The inner sample holder is equipped with the resistive heaters, resistive temperature sensors and Hall sensor. The thermal conductivity measuring insert characteristics: - relative measurement accuracy of thermal conductivity coefficient: 3 %; - sample dimensions: a rectangular plate 22×4×2 mm; - temperature interval – from 80 to 370 K; - magnetic field interval – from 0.02 to 2 T.

AMT&C LLC offers the wide variety of measuring inserts under customized requirements. Measuring inserts are designed for operation with Halbach-type adjustable magnetic field source, for following applications: - ac susceptibility; - dc susceptibility and magnetization measurements; - torque magnetometry; - heat capacity measurements; - electro-transport measurements; - thermal transport measurements.

Induction magnetometer allows to measure magnetic field isotherms of magnetization (magnetization versus magnetic field (M(H) dependences) in the fields up to 2 T and in the temperature interval from 80 to 370 K. Magnetization is measured by induction method. Specification: - temperature interval — from 80 to 370 К, - magnetic field interval — from 0,02 to 2 Т, - relative measurement accuracy of magnetization - 2 %, - maximal sample dimensions - Ø1.5 × 3.7 mm. Magnetometer (its measuring part) consists of the measuring insert, electronic module and control and data acquisition program and can be used together with the magnetocaloric measuring setup (which includes permanent magnet adjustable magnetic field source, liquid nitrogen cryostat, temperature controller, 2 digital voltmeters, control computer with corresponding interface and control boards).

Experimental setup for express measurements of the adiabatic temperature change in the room temperature range. The setup is intended for measurements of the magnetocaloric effect (MCE), namely adiabatic temperature change (ΔТ), in the temperature range from 273 to 370 K in order to get ΔТ versus temperature dependences rapidly and evaluate suitability of using of the material under investigation as a working body of magnetic refrigerators. The measurements in the setup are conducted by the direct method with the help of a thermocouple. The magnetic field change is accomplished by linear movement of the permanent magnet magnetic field source along the measuring insert. The setup operates in automatic mode under control of the program written on LabView. The setup includes: - the desktop measuring unit, - the desktop control unit, - the ΔТ measuring system, - the control computer. The enhanced algorithm of the setup operation makes possible to investigate up to 20 samples per day.

LLC "AMT&C" offers automatic measuring system (AMS) for measurements of the magnetocaloric effect and other magnetic parameters. AMS includes: - Halbach-type magnetic field source with changing magnetic field based on permanent NdFeB magnets, - liquid nitrogen cryostat, - the set of measuring inserts, - data acquisition and measurements control system guided by a control computer. AMS has the following working parameters: - variable magnetic field strength - from -1.85 to +1.85 T, - variable frequency of the magnetic field change from 0.1 to 1.8 Hz (magnetic field change rate from 0.05 to 6 T/s), - dimensions of the magnetic field area with heterogeneity no more than 1 % - diameter 20 mm, length 20 mm, - working temperature region – 80 ÷ 365 К, - automatic and manual measuring modes. The basic option of AMS is the magnetocaloric effect measurement. - sample dimensions (min-max) (1-2)×(2-5)×(8-10) mm, - measurement accuracy of magnetocaloric effect: 0.1 K.

AMT&C LLC for many years is engaged in design and manufacture of the measuring equipment intended for research of magnetic properties of materials. In the field of the magnetocaloric effect (MCE) these products continue own scientific interests of the AMT&C company employees, recognized experts in this realm of physics. Manufacture of the scientific equipment is based on the following core technologies, backed by patents and numerous know-how: - a wide experience in design and manufacture of complicated magnetic systems, including the adjustable magnetic field generators, controlled by a computer; - use of the most advanced products and ideas in the field of measuring technics; - the magnetic field source and data acquisition system are controlled by means of the specialized software that allows to create setups operating in automatic mode; as a rule, the LabView based software is used. Since 2009 AMT&C LLC produces the measuring equipment under trade mark "MagEq".

• from high quality plastics • for all common spirits • for 0,7 - 1,0l bottles • not anise-resistant • Note: measure pourers only function flawlessly with unsweetened spirits

USED FOR HANDLING OF large diameter pipes. Specially designed for large diameter pipe lifting / copper coil as an option / hot material handling up to 650°C as an option

USED FOR HANDLING OF - scrap - turnings - burden, metal charge. 75% Duty cycle / Rugged cast case / Special coil design / Heat insulation gasket / Heavy-duty steel bottom plate / High-quality sealing compound. Compatible equipment: Sennebogen, Fuchs, Liebherr, Caterpillar, Hitachi, Volvo etc. Excusive one year replacement warranty

USED FOR HANDLING OF sheet steel in packs or single / slabs. Electro-permanent magnets; current is supplied to the coil only to activate or deactivate the magnet / a magnetized load may be held by the electromagnet as long as required / energy efficiency / high safety level / ease-of-operation / high level of operating efficiency

USED FOR HANDLING OF coils / rod and rebar in coils. Specially designed for eye vertical coil lifting / copper coil as an option / hot material handling up to 650°C as an option

USED FOR HANDLING OF Sheet steel in coils / Sheet steel in coils, lifting from the lateral and end sides / -Rolled wire coils, rebar coils, from the end side Heat-resistant version (cargo temperature up to 650° degrees C). Aluminium coil

Electromagnets for slabs, sheet steel in packs or single pieces, rectangular metal blanks, tubes in packs.High reliability and durability of the winding / Stability of lifting parameters in the operating process / Special design is available for operation in underwater conditions / Heat-resistant version (cargo temperature up to 650°C). Compatible equipment: Cranes / Spreader beams. Aluminium coil

Transported cargo: Slabs / Forgings / Heavy-weight metal blanks. Compatible equipment: Cranes / Spreader beams. Energy saving as per ton of the transported cargo / Heat-resistant version (cargo temperature up to 650°C) / Aluminium coil