Electronic pressure regulators - Import export

Testing by means of mass flow method - Multi-channel applications possible - Different measuring ranges possible - Electronic pressure regulator - Completely remote controllable - Optionally remote controllable via ProfiNet

The flow tester CETATEST 915 is used for flow testing with compressed air. It includes a measuring system consisting of laminar flow element (LFE) and differential pressure sensor In the direct test method the air, provided by the internal pressure regulator, flows through the measuring section before it enters the test part.In the indirect method, the measuring section is located in the outlet flow of the test part. Due to the special design of the measuring section a laminar ow is generated. The resulting pressure difference is directly proportional to the volume flow. With the optional electronic pressure regulator and four calibrations for up to four test pressures the application range is substantially expanded. Special versions: The CETATEST 915-G is a fully automatic flowmeter for the detection of leaking parts. Typical applications: 915: Testing of valves, vehicle exhaust systems, pipes, membranes, 915 G: Gas appliance industry, after-work jobs in the automotive industry

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. Due to their plastic housing these pressure regulators are light-weight and inexpensive. These pressure regulators are installed via flange connection on the bottom side. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. Connection is done by 1/8“ NPTF inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These miniature pressure regulators fit into applications with low space requirements and low pressure levels. They work reliable and have a long life expectancy. A rotary knob is used to set the pressure level. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. Connection is done by 1/8“ NPTF inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These miniature pressure regulators fit into applications with low space requirements and low pressure levels. They work reliable and have a long life expectancy. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

The pressure regulator type 8042 in reinforced version is a smart combination of a pilot pressure regulator with a sliding gate control valve and is excellently suited for gases and vapors. The pressure regulator, which operates with auxiliary pneumatic energy, is characterized by highest dynamics and control quality. External or manual set point adjustment completes the compact and simple design of the valve and regulator.

The pressure regulator type 8042 is a smart combination of a pilot pressure regulator with a sliding gate control valve and is excellently suited for gases and vapors. The pressure regulator, which operates with auxiliary pneumatic energy, is characterized by highest dynamics and control quality. External or manual set point adjustment completes the compact and simple design of the valve and regulator.

The self operated pressure regulator Type 8011 in a reinforced version with closed spring cover in the form of a pressure reducing valve (downstream pressure regulator) or an excess flow valve (upstream pressure regulator) is used in a wide range of process engineering control tasks. Media such as steam, liquids, gases, etc. can be excellently controlled without auxiliary energy.

The self operated pressure regulator type 8011 with closed spring cover in the form of a pressure reducing valve (downstream pressure regulator) or an excess flow valve (upstream pressure regulator) is used in a wide range of process engineering control tasks. Media such as steam, liquids, gases, etc. can be excellently controlled without auxiliary energy.

Compact series pressure regulator with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

maximum accuracy, a long service life and a userfriendly system, combined with flexibility Highprecision pressure regulation, selectively regulated input pressure in each Line All metal components that come in contact with the medium is brass ans SS304 Quick system calibration easily by the operator and calibration data saved in the controller modules Convenient operation, evaluation of results and clear visualization via Labview and windows based software Operator access to all important settings from the front panel Each station can be individually isolated from the supply pressure for service purposes PLC based control of the pressure channels Pressure gauge for checking each line actual pressure

EMD HP series drain have been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The units can be installed as external drain on any application specified below. Condensate accumulates in the collecting reservoir and when the level is high enough condensate is being discharged from the system without any air losses. Fluid level is detected by precise capacitive level sensor. EMD HP series is also equipped with operation alarm (version A), led indicator, test button and internal strainer. Version with Service Network (version C) for diagnostics and parameter setting is also available. Working hours, valve operations and other operating parameters are stored in internal memory and can be read with Service Network reader.

Armas “PR” model pressure reducing control valve is the hydraulic control valve which reduces high upstream pressure value into desired lower pressure value by means of built-in pressure reducing pilot valves. Pressure reducer control valve controls downstream pressure value continuously and maintains it constant without being affected from flow rate and upstream pressure values. When no flow exists in the system, it is closer by itself automatically. When valve upstream pressure value decreases below adjusted downstream pressure value, it is opened fully by itself. Valve may be user in vertical and horizontal positions in the system.

The oil-free SILVER-LINE compressor OF-S90-4 is standardly equipped with a filter pressure regulator (manual condensate drain) and a 4 liter air tank.

Our installation systems with integrated safety control block are suitable for installation in pressurized lines. The integrated safety control block consists of a volume flow reduction unit and a pressure reducing valve. These two components make this system become a cost-effective, very safe, and technically fast operating solution. The mounting to existing systems and machines can be completed in just a few minutes, because there are only 2 connections and mounting material is also part of the system.

Diaphragm Pressure Reducing Valve DN15-DN25 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded (FF) / Type : With union, with gauge (manomater) / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems

Gas pressure regulators of the RDU type are designed to reduce and automatically maintain gas pressure “after itself” using the set value. Gas pressure regulators of the RDU type are used at the facilities for main gas pipelines: Gas distribution stations, Gas purification and dehydration installations, Compressor stations, Gas fields. Distinctive features of the RDU regulators: The simplicity of the device, Tightness at complete closure of the valve, Possibility to automate the reduction process. Upper setting limit, MPa/(bar)-1.2/(12) or 4.0/(40) depending on the setting device. Lower setting limit, MPa/(bar)-0.15/(1.5) or 1.2/(12) depending on the setting device. More information on our website.

Powerful and service reduced Dome Pressure Regulator applicable for mounting in pipeworks. Benefits: high pressure stability even when subject to fluctuations in withdrawal enables process reliability Pilot Control Tube (PCT) for particularly high constant outlet pressure applicable for almost all gases accurate dynamic regulation high flow rate Balanced Seat Design (BSD) for better control precision complete mounted, inclusive pressure gauge, pilot pressure regulator and fittings working pressure changable at any given moment (readjustable) – e.g. due to temperature fluctuations provides constant working pressure by dynamic control no disperse of pilot gas to the environment – closed system pressure gauges optionally in stainless steel and/or filled with glycerine indoor and outdoor installation connection for wall mounting panel easy installation and removal

Gas pressure regulators RD-M are designed to reduce and automatically maintain the gas pressure “after itself” at the set value. Gas pressure regulators of the RD-M type are used at the facilities for main gas pipelines: Gas distribution stations, Gas purification and dehydration installations, Compressor stations, Gas fields. Distinctive features of the RD-M regulator: Hydrate formation in the “seat-valve” contact zone does not affect the regulator operation. Tightness at full closing of the valve. Smooth regulation characteristics due to the use of an oil compensator. High accuracy of maintaining the set pressure. High maintainability (possibility to repair wearing parts without removing the regulator body from the reduction line). Possibility to automate the reduction process. Upper setting limit, MPa/(bar)-1.2/(12) or 4.0/(40) depending on the setting device. Lower setting limit, MPa/(bar)-0.15/(1.5) or 1.2/(12) depending on the setting device. More information on our website.

Gas pressure regulators of the RDU-T type with a heat generator are designed for automatic regulation of gas pressure “after itself” of the set value at the facilities of high pressure gas pipelines. They are used at: Gas distribution stations. Gas purification and dehydration installations. Gas fields. Compressor stations, etc. The regulators are designed for operation at ambient temperatures from +50 C to -40 C and relative humidity up to 95% at a temperature of +35 C. Distinctive features of RDU-T regulators: The RDU-T regulators differ from the RDU regulators of the same class by the heating of the shut-off and regulating device in the zone of gas throttling using specially mounted heat generators which operate without an external energy source by taking a part of the kinetic and potential energy of the compressed main gas. The heating temperature is sufficient to prevent hydrate formation processes. More information on our website.

The gas pressure regulator of the RTBK type is designed for automatic regulation of gas pressure “after itself” at the facilities of high pressure gas pipelines, such as gas distribution stations, gas treatment and dehydration plants, gas fields, compressor stations, etc. The operating medium is natural gas and other gases that are not aggressive to regulator materials. Inlet working pressure: from 12 to 100 bar Output working pressure: from 1 to 12 bar Depending on the order, the modular regulator of the RTBK type can include the following elements: General-purpose body based on which the modular type regulator is built. Active module. Monitor module. Built-in shut-off valve. Shut-off valve as a separate element connected in series with the regulator body. Noise reduction module. And other technical combinations of modules and components. More information on our website.