Equipment tools - Import export

Ingeniería Iradi also designs, develops and manufactures equipment and special machines as well as conducting engineering studies and implementing automation proposals for repetitive manufacturing processes. We design the necessary equipment to facilitate the manufacturing, handling and assembly process We design and manufacture different types of equipment: - for the welding process - for verification and control - for holding - for turning - for detection - for assembly and calibration We have qualified personnel with extensive experience in the assembly and integration of various components and subsystems, and we collaborate closely with entities that specialize in electrical and electronic systems.

we design. manufacture and test new products from the previous*/ determined requirements, from me design phase of virtual models using the most advanced 3D software, through examnng with the end element method, up to the prototype and tools manufacture for mass production. Ccftsidenng our big e»penence in 3D software application, m are able to maximally shorten the devetopment time and expenses due to meiimum usage of capab&ties oi modern software solutions.

If you want to see your tools in a good shape with fanstasitc apperance in your tool boxes. We design tool organizers from the foam products. Our design team create and customize foams based on your tools diemension and shapes. Foam Tool Organizers Features : . Interior Protection .Protecting parts during handling .Fragile products that require a soft cushion .Gives your lightweight or fragile products appropriate cushioning . Apply to tool kits Keywords :foam tool organizers, polyethylene foam organizers,polyethylene foam inserts,EVA foam tool organizers, tool kits, foam tool kits, foam organizer for tool kits,foam equipment organizer

- zero-gravity ability - tool handling - tool positioning - ergonomic work place - assembly / production - tool support - quality made in germany

Introducing the Tacker – also known as a stapler for pipe fastening, this tool is exceptionally convenient for installers working on the manual installation of a minimum of 500 square meters of underfloor heating daily. With this tool, you not only save a significant amount of time but also preserve your health. The staple thickness is adjustable, with a staple height of 40-60 mm. Our tackers work with all popular staples in the market. The device features an adjustment system that prevents staples from falling out, allowing you to regulate the force of returning the arm to the base position. Upgrade your workflow with efficiency and precision using our reliable tacker. Your time matters, and so does your well-being. Choose quality, choose convenience – choose our Tacker.

IEC lock is an unique concept to avoid quickly any unwished disconnetion of your equipement. Any special tool is required to secure your connection of the main power to your equipment. Plug and Play. The C13 female connector moulded on the cable match any inlet in conformity with the CEI approuval on your equipment . Protect your computer,medical equipment,audio enz... against accidental disconnection. Features: Cabel: 3 x 1.00 mm HO5VV-F Colors: Black,blue,grey,white, Maximun lenght : 3 meter

Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification

Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible

Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Other information Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0 Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the Zipper E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Zipper Zipper E-Chain® Short installation time: Lightning fast opening and closing of lids with zipper Zipper lid can be separated and joined in any chain link Small pitch for low-noise, silent operation High accelerations: 100 m/s² and more Interior separation possible Zipper E-Tube resistant against chips and dirt Closed E-Tube with zip-open system Protection against dirt and chips Lightning fast opening of the lid in a band Modular design - simple lengthening and shortening Small division for low-noise, silent operation, high accelerations Typical industrial sectors and applications Automatic insertion machines Semiconductor devices Linear motors, handling systems Any kind of technical equipment Measuring instruments Machine tools (Zipper E-tube) Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0

By using serial tools for the production of prototypes we can save your time The prototype pieces are the key for the efficient serial production. This is why we pay a lot of intention to all prototype processes as well as all processes before the serial production. This phase is intended for taking down all data and information which are vital for the implementation in the serial production. Based on the foreseen technology, which is the result of experience and data from the simulation equipment, we produce serial production tools for the production of prototype pieces in our company. Because we use serial tools for prototype production, we do not need additional time and special adjustments to transition to classic serial production. This gives us the advantage of being able to offer serial production within the shortest possible timeframe.

Specialist translation services for the Automotive Industry in 150 languages. Our translation agency is specialized in translations for the Automotive industry. Our professional automotive translators can translate documents and technical manuals for the automotive industry into 150 languages. Press releases, user and service manuals of new vehicles, websites of automotive manufacturers, specific software packages for the trucks/car industry, marketing materials for the the transport sector, highly technical specifications of mechanical and electronic systems, transportation and rail, catalogues of parts, databases of tools, heavy equipment, motorcycle, truck and car manufacturing and assembly. Our automotive translation company is specialized in translations for all kinds of companies involved in the design, development, manufacture, marketing, and selling of motor vehicles, towed vehicles, motorcycles and mopeds. We are members of the Society of Automotive Engineers (SAE).

The outer ring of the Standard Type Crossed Roller Bearings is made of two split pieces, which are bolted together to prevent separation during transportation or mounting, enabling easy handling. These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which require compactness, high rigidity and high rotational accuracy. In addition, bearings made of stainless steel and those with inner and outer rings provided with mounting holes are also available on request. Please contact IKO.

High Rigidity Type Crossed Roller Bearing V has a solid onepiece construction for both inner and outer rings. Therefore, high accuracy and high rigidity are achieved, and mounting errors can be minimized. As separators are incorporated between the cylindrical rollers for smooth rotation, these bearings are suitable for applications where rotation speed is comparatively high. These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which require compactness, high rigidity and high rotational accuracy. In addition, bearings made of stainless steel and those with inner and outer rings provided with mounting holes are also available on request. Please contact IKO.

INOX Tar Remover is a very fast-acting cleaner for all tar, grease and oil contamination, as well as similar soiling on motor vehicles. The product can also be used for cleaning tools, equipment, devices and machines in which tar is processed. Due to the fast effect the tar remover is particularly economical in use and, when used properly, rubber and plastic friendly.

The UNI lock mounting clamps can be installed in any position on machine tables, fixtures or workholding equipment (tooling plates, cubes, tombstones etc). The modular design enables the number of clamps and distance between them to be ideally adjusted to suit the clamping task. The clamps can be supplied with or without rotation lock. The high clamping forces are generated by the integrated spring package (the unit clamps when depressurised). Compressed air is applied to release the clamp. The following holding forces are possible with the UNI lock clamping bolt in conjunction with M10, M12 or M16 fastening screws: Holding force (M10) 35,000N Holding force (M12) 50,000N Holding force (M16) 75,000N Supplied with: 1x clamping module incl. 6 fastening screws. 6x screw protection caps. 2x air connection O-rings. 1x installation O-ring.

Construction equipment attachments are specialized tools and devices designed to increase the functionality and versatility of machine enabling them to perform a wide range of tasks. They allow construction companies to get the most out of their equipment, from excavators to backhoe loaders and more. Novelty Steel is an experienced fabricator of attachments and their parts for many industries including mining, demolition, construction, quarrying. * Buckets * Grapples * Blades * Couplers * Hydraulic Breakers

This stable production table can be used flexibly thanks to four swivel castors (2 of which are lockable). As an integral part of your business equipment, the table can be used anywhere in the production or warehouse. The castors make it easy to move and lock it in place. It offers not only a mobile workplace but also a high load capacity. The table consists of our proven, silver anodised aluminium square profile "Quattro" and screen printing plates as work surface. The height of the two shelves is well thought-out and supports back-friendly working. With the purchase of this table you not only create additional work surface, but also storage space for materials, cardboard boxes or tools. Equip your employees with a high-quality and mobile production table!

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system Also available as spray version OKS 701

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

The new IPC charger series is the latest innovation in the field of quick-charging. The universal chargers have integrated communication and support all popular communication protocols, such as CAN, I2C, SM, LIN, HDQ. Li-ion rechargeable battery packs from 24 V to 48 V will be automatically detected. Once the E-BUS charger has made contact with the rechargeable battery, an extensive diagnostics procedure is started. The intelligent chargers identify the rechargeable battery voltage, the charge current is adapted and the charge process started. The output power here is up to 300 W. This enables the shortest possible charge times with simultaneous exchange of parameters to be realised with applications such as in drive systems, power tools or medical equipment. With the IPC 300W we are delighted to present a universal charger that can adapt to all lithium ion rechargeable battery systems.

Small and light. With a weight of only 1.6 kg incl. battery, very compact dimensions and excellent ergonomics, the tool is perfectly equipped for daily use and every installation situation. Strong. 10,000 N setting force in combination with the new brushless motor makes it possible to reliably process any blind rivet up to 5.0 mm. Fast. With a pure setting process of less than one second, 30 blind rivets can be processed in 60 seconds. This means that the Rivdom eBZ 1 is twice as fast as comparable tools and saves more than 45 minutes working time per day! The ideal tool for industrial series production.

We provide sheet metal bending services using three precision Trumpf press brakes (TruBend_3100, TruBend_5085; TruBend_5320) with a maximum pressure of 320 tons and a maximum bending length of 4000 mm. Our well-equipped inventory of bending tools enables us to manufacture even the most complex parts, and dedicated software supporting machine operation allows us to simulate the bending process. All this guarantees the execution of orders with extreme precision and accuracy. In addition, in our machine park we have two CNC bending machines for bending pipes and profiles. We operate on both mandrel and mandrelless benders, while specializing in bending pipes and profiles. In our plant we deal with bending of, among other things: - structural steel - galvanized steel - stainless steel - aluminum

The Ronix 2701 Rotary Hammer Drill stands out as the ideal choice for individuals in need of a versatile tool. Equipped with a robust SDS plus bit holder and an 800W motor, it empowers you to drill, hammer drill, chisel, or release with utmost safety and precision across your entire work site.

Our metalworking shop allows us to realize customized housings according to customer requests. A team of experienced employees assures the necessary precision including all required cutouts and drillings of housings. Our own tool shop is equipped with machines for lathing, milling, electrical discharge machining and grinding which allow us to quickly manufacture customized parts/adjustments in-house.

Technical information The AM 02.1 is an electropneumatic modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules. The stripper-crimper may be adapted by using the corresponding tools for ferrules of cross-sections from 0.25mm2 to 2.5 mm2 (AWG 24 – 14) and crimping lengths from 5mm to 12 mm. Specification For definition of the required tools the correct specification of the processed ferrules as well as the processed wires are needed. Options: Quadrocrimp-tool The stripper-crimper can be equipped with a quadrocrimp-tool which creates 4-side quadratic crimp.

Technical information The AM 04 is an eletropneumatic modular stripper-crimper for rapid and reliable processing of loose insulated Z+F ferrules. The stripper-crimper may be adapted by using the corresponding tools for ferrules with cross-sections from 4mm2 to 10mm2 (AWG 12-8) and crimping lengths from 8mm to 18mm. Specification For exact definition of the requierd tools, the correct specification of the processed ferrules as well as the processed wires are needed. Option: Quadrocrimp-tool The stripper-crimper can be equipped with a quadrocrimp-tool, which creates a 4-side quadratic crimp.

Technical information The AM 04.1 is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules. The stripper-crimper can be adapted by using the corresponding tools for ferrules of cross-sections from 4 up to 10 mm2 (AWG 12-8) and crimping lengths from 9mm to 18mm. Specification For definition of the required tools the correct specification of the processed ferrules as well as the processed wires are needed. Options: Quardrocrimp-tool The stripper-crimper can be equipped with a quadrocrimp-tool, which creates a 4-side quadratic crimp.

Technical Information The pneumatic driven crimper is specifically desig­ned to crimp loose turned contacts. In the range of 0.08 up to 4 mm2 (AWG 28 – 12) wires and contacts can be crimped. A 4/8-indent crimp corresponding to SAE 22520 is standard. The crimping-depth can be adjusted manually in 10 µm steps. The machine is equipped with standard crimping tool kit, the crimper can be easily adapted to various contacts. Brackets for optimized infeed and centering of the wire are optionally available. Options Other crimp form: 4-indent Brackets for optimized infeed and centering of the wire