Fill level monitoring - Import export

Microwave barrier for contactless detection of dry bulk solids in containers, pipes or chutes. Reliable fill level and limit detection. • simple retrofitting • detection through all nonconductive walls • up to 1,000 °C possible with ceramic mounting • insensitive to material caking • usable for profiles up to 25 m

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit. Water-based liquids like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Since they contain no mechanical moving parts, their function will not be influenced by dirt particles or other influences. No electrical current is sent through the medium via an electrode with BEDIA sensors, an electrolysis of the medium is not possible. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that occurs when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator. This signal is processed by a microcontroller-based evaluation circuit which activates or deactivates an output stage.

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors react when a filling level is exceeded or falls below a limit. Aqueous mediums like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Since they contain no mechanical moving parts, their function will not be influenced by dirt particles or other influences. No electrical current is sent through the medium via an electrode with BEDIA sensors, an electrolysis of the medium is not possible. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that arises when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator, causing it to oscillate. Then this signal is processed by a microprocessor-based evaluation circuit.

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit. Water-based liquids like coolants, AdBlue®, fresh water, waste water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that occurs when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator. This signal is processed by a microcontroller-based evaluation circuit which activates or deactivates an output stage. Types of Media The level monitoring sensors are designed for two different media types: For electrically conductive liquid media with relative permittivity within a range of εr 35 … 85 (water, coolant, water/glycol mixture) For electrically non-conductive liquid media

BEDIA intelligent tank sensor ITS 65 is used to monitor the filling levels of oils of any kind. The sensor is able to automatically recognize and what kind of oil (hydaulic oil, engine oil etc.) is present and calibrates itself to it. The capacitative measurement principle permits measurement of levels without mechanically moving parts. This considerably increases stability and operating safety. Mechanics The new tank sensor ITS 65 is characterized by a particularly stable, but light mechanical system specially designed for “Heavy Duty Applications”. The mounting flange and measurement tube are constructed from die cast aluminium. This construction permits the insertion of tank sensors up to 1200 mm in length, without additional support on the tank floor. Analogue Output The analogue output is available as an voltage output with a range from 0 V to 10 V or as an PWM output.

EGE microwave filling level monitors monitor the filling level of fluids, powders and granulate with a low DK value and are particularly resistant to adhesion. The MFC sensors are also suited for separation layer detection. The sensitivity is adjustable. The sensors are based on a special variant of microwave frequency shift technology. EGE supplies the sensors in varying lengths up to 1000 mm. The stainless steel and PTFE sensor tip is suited for use in aggressive media.

Capacitive filling level monitors for operation at medium temperatures of up to 230° C. With PTFE or PEEK housing and stainless steel thread for use in aggressive media. The sensors are based on the proven capacitive principle. The medium to be detected functions as dielectric. The medium in touch with the sensor generates a capacity change. This is converted into a switching signal or an analogue 4...20 mA output signal. This applies both to conductive and on-conductive media. With their small design the sensors of this series are well suited for installation in tight spaces. Upon request we supply the sensors with FDA certificate.

EGE microwave level sensors monitor the filling level of fluids, powders and granulate with a low DK value and are particularly resistant to adhesion. The MFC sensors are also suited for separation layer detection. The sensitivity is adjustable. The sensors are based on a special variant of microwave frequency shift technology. EGE supplies the sensors in varying lengths up to 1000 mm. The stainless steel and PTFE sensor tip is suited for use in aggressive media.

The garbage collection sensor for litter bins is an innovative device that allows you to easily and conveniently monitor the filling of litter bins. The sensor based on radar detection is resistant to changing environmental conditions, dirt, etc., therefore it guarantees a very high detection efficiency ensuring the service life of the device at least 2 years. The management system can monitor its fill level conducting in real time an effective and informative policy of use.

- Quality control and safeguarding - Individual test values and criteria - Customer-specific measuring and testing plants - Single measuring systems with manual assembly - Fully integrated and automated testing plants using robots - Optical, acoustic or electrical systems with/ without parts contact, data preparation, analysis Measuring and testing systems we were involved in: - Camera systems with corresponding image processing - Part recognition, positioning, color and surface examination, checking for damages - Optical / tactile / ultrasonic tests using sensors and displacement measurement systems - Leakage and pressure tests - Inspection and monitoring of filling level - Run-out properties and accuracy - Backlash measurement - Electrical tests and measurements - Electrical values, check measurements, switching and opening properties Used in all branches: e.g. pharmaceuticals industry, medical engineering, cosmetics, electronics and automotive industries.

SmartCity Bin Indoor TV is a smart IoT solution from Binology for the indoor use with advanced advertising possibilities. This smart bin is specially designed as a brand-new opportunity for the efficient indoor waste management, supplied with two 43’’ high resolution LED screens and remote content manager at your service! Indoor smart dust bin from Binology combines sanitary waste collection and storage with stylish and technologically advanced marketing instruments. “Clean hands” technology with build-in foot pedal in basic setup! Tight closing shutter won’t let the unpleasant odours out, while real-time fill-level monitoring and smart notification system help to prevent overfilling. Optimize controlling and operational costs, keep track on air quality, temperature, pressure and humidity of the environment, collect data and create reports with SmartCity Management cloud service and mobile App!