Foot valves - Import export

Pedal valves with foot actuation. Available with protection or without protection cover in the functions 3/2 and 5/2, also with latching. Stable stand and safe use thanks to the wide base.

KAMAT foot valves and foot switches are products of the highest technical quality. They are designed for opening and closing the water supply to high pressure blasting equipment. This valve can be used to open and close the water supply to a high pressure blasting unit. The water is supplied by a high pressure hose connected to the foot valve. When the pedal of the valve is depressed, the valve opens. When the pedal is released, the valve closes and the water is discharged through the bypass without pressure. The foot valve and high pressure pump can also be connected via an electrical switch. If the pump has a suitable control, the pressure generation is switched on or off mechanically when the valve is actuated. The KAMAT foot valve has been designed and constructed in accordance with the rules of technology and applicable standards and guidelines.

Suction equipment comprising: 3/4" elbow joint with sleeve 1 metre of Ø 32 mm hose Foot valve

Suction equipment comprising: 3/4" elbow joint with sleeve 1 metre of Ø 25 mm hose Foot valve

Filter unit guaranteeing a double filtration For oil and diesel by absorbing the water and impurities present Filtration capacity of the first cartridge: 30 μ with water absorption Filtration capacity of the second cartridge: 5 μ for impurities Flexible suction hose: 3 metres with a built-in foot valve and a 3-metre discharge hose Structure: a trolley on wheels with a large diameter and retention tray

NBR flexible impeller pump for diesel and oils Trolley: vertical Suction kit: foot valve, cam fittings and 3 metres of hose Discharge kit: cam fittings and 3 metres of hose, spout Voltage: single-phase 230 Volts Max. TDH: 15 metres Voltage: single-phase 230 Volts Power: 0.25 kW (FiLTRO-JEP40), 0.55 kW (FiLTRO-JEP80) Orifices: 1" (JEP040), 1"1/2 (JEP080) Hose Ø: 25 millimetres (FiLTRO-JEP40), 40 millimetres (FiLTRO-JEP80) Flow rate: 2.1 m3/h (JEP040), 4.8 m3/h (JEP080)

Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 400 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm Working range: ram to back wall = 200 mm Table dimension: 600 x 400 mm Quick change tool system

Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 90 KN Stroke = 40 mm 25 Double strokes / min. Max. daylight = 250 mm Working range: ram to back wall = 130 mm Working range with turn table: ram to back wall = 90 mm Working height 950 mm

Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 50 KN Stroke = 37 mm Max. daylight = 200 mm Working range: ram to back wall = 110 mm Swiveling table to use tools to manufacture holes for sash bars

Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 200 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm Working range: ram to back wall = 200 mm Table dimension: 600 x 400 mm Quick change tool system

1. Features There are additional high performance accessories available convenient applications - Anti-siphon Check Valves - Strainer Foot Valve - Flange Connections, Tees, Elbows 2. Precise Valve Structure The degree of precision is maximized since Double check balls or spring insert type is adopted in valve structure 3. Gas Locking Prevention - Liquid End Design minimizeds dead space. - Air Relief Valve can be provided for vaporous liquid. (optional item for KS 51~32)

Quick change tool system Hydraulic operated Foot valve operated Max. power at 200 bar = 160 KN Stroke = max. 80 mm adjustable via limiter switch 14 Double strokes / min. Max. daylight = 250 mm Working range: ram to back wall = 130 mm Working range with turn table: ram to back wall = 90 mm Table dimension: 280 x 200 mm

DIESELFIxx 60 l/min-230 V 50 Hz-EUS-EBZM-ZVABD-4 m specification Vane pump with integrated bypass (23 430) Switching on and off by removing the nozzle Hydraulic siphon protection according to WHG (Water Resources Act), permanent effective Flow counter NUMERIxx³, three-digit (23 192) Automatic nozzle with type approval and swivel joint, ZVABD (23 168) Dispensing hose, 4 m, DN 19, G 1" a, G 1" i (23 155 957) Foot valve with suction strainer (19 890) Fassverschraubung, G 2" a, G 1" a Intake hose required according to assembly: 1,6 m (23 156) 2,0 m (23 158 959) 4,0 m (23 155 950) 6,0 m (23 155 956) Packed in a box

Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow stop less than 0.05 l residual amount in 200 l drum possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (mmersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Product attributes: - Pump with mechanical seal - Switch lever to close the backflow valve / foot valve - Pulsation-free transfer - Transfer against closed valve (e.g. hand nozzle) possible - Radial shaft sealing ring prevents intrusion of vapours and liquids into the coupling area Benefits: - Less than 0.05 l residual amount left in 200 l drum - Universally and flexibly applicable - Reduction of cleaning and waste disposal costs - Optimal use of fluids - No loss of medium when taking the pump from drum to drum

High-pressure cleaning and surface preparation with water requires precise management of the water jet. This precise management is necessary to ensure that the required result (e.g. surface finish) is achieved within a reasonable time. The method must be safe and fatigue free. With this in mind, we offer a specially designed and manufactured range of high pressure guns with electrical or mechanical control. The exceptional ergonomics of these tools have been achieved through innovative detail solutions: For example, our high-pressure guns are equipped with a special swivel handle that transmits any torque to the wrist. In addition, the hose connection can be swivelled in all directions, allowing optimum hose routing for all working situations. Our range of high pressure guns is complemented by various versions of foot valves, rotating gun lances, rotating nozzles and other accessories for a wide variety of applications, such as pipe cleaning.

Pressol electric Oil pump set mobile model 23001960 Complete with trolley 17009 with 4 meter hose and oil gun digital with 30° spout 1/2"G 19698950 Mobile oil system for 220 liter drum Electric oil pump 23321 with pressure switch suitable for oil up to SAE 90 Yield maximum 10 liters per minute, maximum pressure 10 bar Suction tube with bend and foot valve, G 3/4" female, G 2" male (19 523) Check valve (84 546) Suction hose, 2 m, G 3/4'' female/male (19 512) Transit hose, 5 m, G 1/2'' female/male (19 565)

Product Type HA5111 Details -Chrome brass body -Brass footboard -Flow rate: 3.5-6L

The Modellrange ECONOMIC is made of durable sheet steel. It comes with adjustable media consumption, a blast media collection bin and a sieve to separate blast media from contaminations. The cabinet has two lateral openings with sealing sliders for rod materials. A perforated metal plate with enforcements. The system has a sectional door that opens the complete workspace. The Cabinet comes with a door-safety switch, two large operation holes with multiple rubber Sealings. Monitoring window, sized 400x500 mm, with easy changeable glass/safety-glass panes, as well as 2 durable pneumatic springs. Energy Saving Lamp, attached from outside. Injector-type blast head, with air- and blast nozzle made of hardened steel. The system comes with all necessary compressed air and blast media hoses, oil-water separator, manometer, an electrical magnet valve and a foot switch. On/Off switch, dust filter system 0,55 kW, intermediate pressure turbine. Dust collection bag.