Gauges - Import export

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

Continuous management system for the tank's level. OCIO reports the static pressure created by the height of the liquid via a tube inserted in the tank, and displays the level or volume of the liquid.

Housing steel. Viewing glass thermoplastic polyamide. O-ring and flat seal rubber (NBR). Reflector aluminium. Screw and hex nut steel. Version: Housing painted black. Transparent viewing glass, high mechanical stability, non-ageing, temperature resistant with oil up to 100 °C, with water up to 70 °C. Reflector painted white, markings and scale black. Screw and hexagon nut, electro zinc-plated. Note: The oil level gauges can either be fastened as shown in the illustration or directly in the threaded hole. Centre distance for the fastening holes = L1 ±0.5. The oil level gauges are suitable for tanks operating without pressure. Maximum operating temperature: 100 °C.

Material: Aluminium. Version: Bright. Flat seal asbestos-free. On request: Cap marked OIL. Drawing reference: 1) flat seal

Material, version: 1. Sealing cap red Polyamide 66 thermoplastic. 2. Filler sieve black Polypropylene thermoplastic. 3 Flange electro zinc-plated steel. 4. Fastening screws electro zinc-plated steel. 5 Flange seal cork. 6. Chain brass.

USE : Various Inspections and measurements (Controls) ADVANTAGES : Simple and tough Portable POUGET TEST - NABLA (French Clips) - Ref. PTN Used to measure the curvature of the NABLA Clip on the track after tightening. - Measurement Stroke = 10 mm - Measurement accuracy = 1/10th mm - Delivered with wooden Case for easy transport = 30 x 30 x 10 cm - Weight of the Device in the Case = 4 Kg . GAUGE for inspecting the play of the Fishplate Joints - Ref. 580 - Scaled 1 - 20 mm - Cadmium plated for protection - Length = 230 mm - Weight = 0.25 Kg GAUGE for inspecting the tightness of Clips, " RN" (French Clips) - Ref. 579-1 - Angled Model - Scaled 0.3 to 5 mm - Length = 150 mm. - Weight = 60 g. CALLIPERS for inspecting the half-open position of the Switches, SNCF Model - Ref. 585 - 5/6/8 mm. Wedges - Length = 140 mm - Aperture = 20.5 mm - Weight = 0.17 Kg GAUGE 3 points in steel for NABLA Clips - Ref. G3P - Weight = 0.3 Kg (Normal Tightening = 1.3 mm) GAUGE 3 points (double - mini / maxi

USE : High-Precision Rule to measure the Switches and Crossings (New Equipment or Maintenance) ADVANTAGES : - Direct reading for all Measurements - Integrated adjustable bubble Level. 1 - This SW-9182 Rule is accurate for the following direct readings and measurements : * Track gauge (-10 to +40 mm) * Superelevation of the Track (-40 to +200 mm) * Track Guide (-10 to +10 mm) * Between Guard Rails (1332 to 1365 mm for Standard Gauge) * Width of Switches Opening (31 to 60 mm) - Size of Switch Tongue Protection. * Accuracy of reading : 1 mm * Size (for Standard Gauge) : 1710 x 105 x 250 mm * Weight = 3.6 Kg (1435 mm Track) ( We can supply for all Gauges) All Rules are electrically insulated. 3 - Rule for checking 1/2 Point and Crossings Ref. 582 with 3 mm Checking Punch "Duralium" . Body Nylon insulator on base - Length 1.65 m - Weight 1.7 Kg OPTIONS : - Wooden Case 175 x 14 x 28 cm (Weight 13 Kg) - Ref. CO - Adaptation Device for Tramway Track - Add Ref. TR - Square at 60 ° to contro