Milling - Import export

Milled toothing, straight teeth engagement angle 20°, bright. Outside diameter extruded, tolerance h9. Note The gear rack teeth are cut using a hob mill. This results in minus tolerances for dimensions H and H1 up to module 2 0.2 mm. module 2.5 to 3 0.3 mm.

Milled toothing, straight teeth. Engagement angle 20°, bright. Note The gear racks are suitable for mounting in series.

Milled toothing, straight teeth. Engagement angle 20°, bright. Note Up to 48 teeth with hub one side, from 50 teeth supplied as disc form. The spur gears have a centre bore or pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the spur gears are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter. Form A with hub Form B without hub

For over 30 years, TYPE EDIT has been the complete CAD/CAM software solution. Taking your ideas and drawings, through design and machining to production. - WITH 400+ POWERFUL FEATURES within 3 interactive modules, TYPE EDIT is packed with vector creation and manipulation tools, combined with 3D bas-relief, connected to a powerful CAM engine creating the smartest toolpath strategies. - COMPATIBLE WITH Unicode, 64 bit, and available in 20+ languages. TYPE EDIT is used across many sectors and applications. - APPLICABLE Engrave, Mark, Cut, Carve in 2D, 2.5D, and 3D within hard metals or soft materials, on any CNC milling machine.

We manufacture rough or fully machined screw down nuts for rollings mills in high tensile brass, bronze or aluminium bronze

Design and manufacture of milling tools such as : - SJM : Super Junk Mill - Junk Mill - Pilote Mill - WOS : WashOver Shoe

DRILLSTAR Taper mill is used to repair collapsed casings or tubings, and to shave off cement or corroded parts in casings. The taper mill hardfacing is designed to clean the casing without cutting it, and to penetrate very gradually. The upper part of the taper mill is long enough to allow the addition of stabilizing blades while still remaining easy to fish. DRILLSTAR Taper mill is available in two types, long or short. Blades, whether spiralled or straight, are fully customizable.

Section mills are designed for cutting and milling a complete section of casing. All models 4 1/2 in. OD and above are equipped with 2 sets of 3 knives: 1 long set and 1 short set, designed for first cutting and then milling the casing. Knives can be hardfaced with your choice of TOPLOY carbide grains or TOPMILL/SWORDFISH tungsten carbide inserts. For most jobs, TOPMILL inserts are strongly recommended to improve milling performance. This tool can be equipped with Flo-tel, which produces a sudden drop in mud pressure when the pipe is cut out, indicating the right time to start applying milling weight.

We manufacture rough or fully machined segment liners for grinding mills in 15% leaded bronze

Lebronze alloys Group was born from the integration of different companies specializing in copper alloys, copper, nickel alloys, aluminium alloys, specialty steels, stainless steels, titanium and nickel superalloys. Thanks to a multidisciplinary know-how, the Group provides innovative solutions to all major industries such as Aerospace, Oil & Gas, Power, Railway but also in sectors manufacturing smaller equipment and products. Our 16 production facilities and 1,400 employees manage a unique range of metal processing technologies: continuous and semi-continuous casting, sand casting, die precision chill casting (manual, mechanized and automated), centrifugal casting, extrusion, ring rolling, hot and cold rolling, drawing, open-die forging, hot stamping, closed-die forging, cold forming, machining, non-destructive testing, etc. The Group’s commitment is to find appropriate and optimized solutions for every sector’s requirements.

USE : Holes to countersink the Heads of Coachscrews into Long Wooden Sleepers. ADVANTAGES : Simples, Tough, Adjustable and easy to Re-sharpen. - Steel Body - Superior High-Speed steel blade locked with a conical Key - Range of Adjustment : Ø 38 to Ø 80 mm Hole. - Centering Attachment Ø 15 mm - Total Length = 230 mm - Net Weight = 1 Kg - 23 mm Square Shank Drive - Ref. FR-23 - Ø 16 mm Cylindrical Shank Drive - Ref. FR-16 OPTIONS : - H.S.S Spare Blade ( can be re-sharpened) - Ref. LFR

The Universal FNG mill is an impact grinder that has the key advantage of being fully adaptable. It can be equipped with different grinding tools (hammer plate, pin plate or blade plates) which are adjustable in relation to the product to be ground. The particle size obtained is adjustable via a wide range of sieving screens with varying perforation sizes. Cleaning and maintenance of the FNG is easy. The Universal mill is equipped with air insufflation at bearing level to eliminate all risk of crosscontamination in the case of multiproduct use. The extensive FNG range starts with the FNG 00 laboratory mill (see Labline range) and the FNG1 leading up to the FNG7 for important production capacities.

The SMA is a mechanical airclassifier, autonomous equipment designed to separate a material of intermediate fineness (0 to 5 mm for instance) or a ground product (0 to 1 mm or less) into two fractions of different finenesses one fine fraction (particles from 0 to 40 microns up to 500 microns); one coarse fraction (from 40 microns to 5 mm for instance). This air classifier can be used either as a classifier operating in an open circuit (for extraction of natural raw material like sand for instance) or in a closed milling circuit, to control the fineness of ground product or to "preclassify" when the classifier is placed after the air separator and grinding oversize only.

The Universal Laboratory Mill (FNG00) is the smallest crushers of the FNG range. The main body is made of machined 316L stainless steel single block, it is intended for the small installations of grinding in laboratory. FNG0000 was designed to be able to be settled on a table. The motor and transmission of the crusher are totally enclosed. Smaller, more compact, it possesses nevertheless the same characteristics as a crusher Forplex Nouvelle Génération variable speed, easy plate change, etc.

The MA (or Hammer mill) is an impact grinder that crushes the input material between the hammer (or knife) plate and a stator fitted with a sieving screen perforated for the required particle size. It is generally used as a pregrinder positioned upstream of a grinding installation. The MA breaks up blocks of raw material into smaller particles capable of being treated by a mill for fine grinding.

The HammerKnife Universal Mill is the combination between a Hammer Mill and an Universal Mill. As the FORPLEX FNG Mill it can be equipped with different grinding tools (hammer plate ou blade plate) which are adjustable in relation to the product to be ground. The FK Mill has the same advantages as the Universal Pin Mill FNG easy to use, easy to clean, easy to maintain, but also simplicity of changing the grinding tools or grids. Perfect for technical applications such as the grinding of natural ingredients (knife rotor designed for the crushing of plants), the FK mill was designed to meet the standards of the foodstuffs industry, fine chemicals industry, pharmaceuticals industry, nuclear industry or even for cosmetics. It can meet FDA, GMP or ANIA standards and criteria. With the robustness and strength of hammer crusher

The PAS integrated classifier mill is designed to treat a wide variety of products obtaining a particle size of 99% down to 10µm. The PAS is equipped with a grinding plate and integrated classifier that are driven independently by frequency variation motors. Different versions of the PAS are available, giving a wide flexibility in terms of installation and usage. The variety of grinding tools (plates, liners) when associated with a variable speed static and dynamic classifier guarantees a high quality ultrafine finished product for all applications. The PAS can be equipped with our latest patented technologies SEALMAX© new generation classifier, OPTICYCLE© internal ultrafine recycling system.

The Cylinder mill, commonly known as the Roller Press works by crushing the material between two cylinders kept under pressure by a hydraulic system (2 to 10 T/linear cm). This mill uses a patented process of pulsating pressure that reduces the level of vibration and contributes in reducing energy requirements and prolonging the service life of wearing parts. It is able to treat high production capacities (up to 500 T/h) and produce fine particle sizes (10 to 1000 microns). Cylinder mills allow for energy savings of up to 30% compared with mills that use traditional crushing methods. The cylinders are equipped with an antiabrasive coating which combined with their slow processing speed provide the grinding solution with the longest service life on the market.

The POITTEMILL pendulum roller mill is a vertical mill that works by compressing the material bed. The pendulums mounted on a star wheel are driven by a vertical shaft. Each pendulum is fitted with a grinding roller that rotates upon its axis. The rotation of the star wheel combines with the articulation of the pendulum to generate a centrifugal force at the grinding roller level. The product is ground between the grinding roller and the fixed bull ring.

The BLX mill is an evolution of the F00 the main body is made of a machined 316L stainless steel single block, without any wielding, in order to avoid any product retention inside the mill. It can be installed in different forms according to requirements it may be installed on a mobile platform or in a closed unit with inerted atmosphere or cryogeny. The BLX enables processing of thermosensitive products, or of products that present a risk of explosion or combustion when in contact with oxygen (ATEX Certification).

Standard carbide square end mills( 1, 2, 3, 4, 6 dents, HRC45-65) Carbide Ball End Mills(2 Dents) Carbide End Mills for Aluminium Carbide End Mills Long Series