Non-ferrous metals - Import export

Profile guide rails can be screwed on from above. The profile guide rails are available in four sizes and one or more carriages can be assembled on them. 4row versions with round arch profile. The tracks of the profile guide rails are set below an angle of 45° and thus can carry loads from all directions. The profile guide rails correspond to the market standard and can replace linear guides of the same design by other manufacturers. On request Lengths up to a max. 3960 mm.

Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge

Standards : EN 1092-1, DIN, ANSI B16.5 Dimension : DN15-DN600, 1/2"-24" Pression : PN2.5-PN160, 150Lbs-2500Lbs Material :Acier Carbonne, Allié, Inoxydable, Duplex & Super Duplex et autres…

Standards : EN 1092-1, ANSI B16.5, ASME B16.47 Dimension : DN15-DN2000, 1/2"-60" Pression : PN10-PN400, 150Lbs-2500Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standards : EN 1092-1, DIN 2566, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN1000, 1/2"-24" Pression : PN6-PN100, 150Lbs-2500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standard : EN 1092-1, DIN 86030, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN1200, 1/2"-60" Pression : PN6-PN100, 150Lbs-2500Lbs Material :

Standards : EN 1092-1, DIN 2631-2638, ANSI B16.5 B16.47, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-60" Pression : PN2.5-PN400, 150Lbs-2500Lbs Matière : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standards : EN 1092-1, DIN 2527, ANSI B16.5 B16.47, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-60" Pression : PN2.5-PN400, 150Lbs-2500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standards : EN 1092-1, DIN 2642, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN600, 1/2"-24" Pression : PN2.5-PN40, 150Lbs-1500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Special Forgings Dimension :½" - 196" up to 35 000 kgs/pc

Special Flanges Dimension : ½" - 196" up to 35 000 kgs/pc

Standard: API 6A Dimension : 2 1/16" - 30" Pressure : 2 000 psi-15 000 psi Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standard :ASME B16.48 Dimension : 1/2"-24" Pressure : 150Lbs-2500Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standard :ASME B16.36 Dimension : 1"-24" Pressure : 150Lbs-2500Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standards :EN 1092-1, DIN 2576, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-24" Pressure : PN2.5-PN100, 150Lbs-900Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standard : AWWA C207-01 Dimension : 4"-144" Pressure : Class B, Class D, Class E, Class F Material : Carbon Steel, Stainless Steel

2-bolt support clamp for PVC and PE pipes or for steel or cast iron pipes CHARACTERISTICS Blue epoxy anti-corrosion coating FGS cast iron body Suitable for PVC / PE and cast iron / steel pipes EPDM seal Pressure rating: 16 bar Available in PB and GB

We manufacture rough or fully machined wiper rollers for cold rolling of aluminium and stainless steel Alloy: aluminium bronze with high hardness

Sand casting of copper alloys, mainly nickel aluminium bronze Maximum weight: 50 tons. Staff: 50 employees. Turnover: approx. 8 M€ 4 et 8 rue Etienne Dolet F-76140 LE PETIT QUEVILLY Tél: +33 (0) 2 35 63 78 50 Fax: +33 (0) 2 35 72 99 99 Internet www.inoxyda.fr E-mail : contact@inoxyda.fr

Sand casting of copper alloys: tin bronzes, lead bronzes, brasses, nickel aluminium bronze, copper and special copper alloys. Maximum weight: 2 tons Staff: 70 employees. Turnover: approx. 10 M€ BP 64 - Rue de l’Embarcadère F - 03600 COMMENTRY Tél. : +33 (0) 4 70 64 58 80 Fax : +33 (0) 4 70 64 64 87 Site web : www.sri-foundry.com E-mail : commercial@sri-foundry.com

Anticorrosion: avoids the corrosion of ferrous and non ferrous metal parts.

Oil dedicated for grinding, profile grinding, sharpening and honing on ferrous metals