Pumps - Import export

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length

We produce pump bodies in pure copper, aluminium bronze, tin and lead bronze as well as brass. Pieces are delivered as-cast, rough or fully machined.

We manufacture pump impeller in aluminium bronze, delivered "as cast" , rough or fully machined according to international quality standards

Feeding system for powder paint Description CUSTOMER'S BENEFIT Design without retention for optimal color changes Strength of the body thanks to the clamping, no deformation Easy to use, quick maintenance and no special tools required Access to the ejector without removing the tip of the powder hose Quick air coupling connectors with colorcoding and dissimilar Metal body and injector allowing solvent rinsing The conductive output tip improves the evacuation of the triboelectric charges thatmay be generated Quick clamping system with a uniform distribution regardless of the number of powder pumps

Body, cover, rotor, screws and bolts of the body: 316 stainless steel Vanes: PTFE Waterproofing: Teflon-coated braid Handle: zinc-plated steel

Body and cover: GS cast iron Mechanism: brass Lever: grey cast iron (brass as an option). Waterproofing: graphite braid NBR flange O-ring, Viton® or PTFE seal as an option

Body: cast iron Mechanism: brass Waterproofing: braid and Viton® flange O-ring, PTFE seal as an option (FHL_POLY-PTFE)

We manufacture rough or fully machined shaft liner and wearing ring for vertical pumps in duplex stainless steel Excellent wearing properties and resistance to corrosion. Very high hardness due to special heat treatment processes.

Body, cover and lever: cast iron Inner mechanism: brass Braid: PTFE Suction: 3/4'' stainless steel pipe with 2” bung Seal: flange O-ring made of Viton®. Optional PTFE seal (FAT_-PTFE) Discharge pipe: stainless steel elbow fitting, 2 m NBR hose (conductor) fluid temperature <80°C Fitting: brass half-shells Manual delivery gun (version FAT ), automatic delivery gun (version FAT_A)

Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: graphite braid NBR flange O-ring, Viton® or PTFE seal as optional.

Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: nitrile O-ring Seal: nitrile O-ring, NBR flange O-ring.

Body, cover: bronze Mechanism: bronze Lever: cast iron (brass as an option -LL). Flange: PN 10 standard Waterproofing: graphite braid

Body: cast iron Mechanism: brass Waterproofing: by graphite braid. NBR flange O-ring, Viton® or PTFE seal as an option

Body: cast iron Mechanism: brass Waterproofing: by nitrile O-ring. NBR flange O-ring

Body, cover and lever: cast iron Inner mechanism: brass Braid: PTFE Seal: flange O-ring made of Viton®. Optional PTFE seal (FAT_-PTFE)

Bare or equipped manual pumps for the transfer of inflammable liquids and/or use in a potentially explosive atmosphere. Products compliant with the ATEx standard 94/9 EC. ATEx certificate no. iNERiS - EQEN 025625/12.”

Body, cover: bronze Inner mechanism: bronze Lever: bronze (brass as an option) Flange: bronze threaded oval Waterproofing: graphite braid

2” discharge kit for PE-A2: fire department fitting + 5 m of flat PVC Ø 50 hose + clamp

NBR flexible impeller pump for diesel and oils Trolley: vertical Suction kit: foot valve, cam fittings and 3 metres of hose Discharge kit: cam fittings and 3 metres of hose, spout Voltage: single-phase 230 Volts Max. TDH: 15 metres Voltage: single-phase 230 Volts Power: 0.25 kW (FiLTRO-JEP40), 0.55 kW (FiLTRO-JEP80) Orifices: 1" (JEP040), 1"1/2 (JEP080) Hose Ø: 25 millimetres (FiLTRO-JEP40), 40 millimetres (FiLTRO-JEP80) Flow rate: 2.1 m3/h (JEP040), 4.8 m3/h (JEP080)

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23)

Body: cast iron Mechanism: brass Waterproofing: braid and Viton® flange O-ring, PTFE seal as an option (FHL_-PTFE)

We manufacture rough or fully machined column pipe in duplex steel and aluminium bronze. Excellent weldability and corrosion resistance due to the cleanliness of the material resulting from the centrifugal casting process.

We manufacture rough or fully balancing & sealing ring in stainless steels and copper based alloys. Large diameter and thin section parts. High dimensional stability resulting from the low and balanced internal stress.

We manufacture rough or fully machined pump components: WNr 1.4027 GX20Cr14

We produce pump bodies, runners, covers in pure copper, aluminium bronze, tin and lead bronze as well as brass. Pieces are delivered as-cast, rough or fully machined.

Inoxyda's experience in alumium bronze alloys used in sand casting enables to deliver world wide large size castings for pump applications. Casings, discharge elbows, impellers, what ever your need, we can cast to 15 To. Parts are delivered as cast, rough or fully machined according to international quality standards. Technical support can include simulation with Magma soft, pattern making (including 3D sand printing technology), ITP (Inspection test plans), 3rd party inspections and worldwide deliveries.

We manufacture pump impeller in aluminium bronze. Delivery around the world in "as cast" , rough or fully machined stage according to international quality standards (EN 1982, ASTM/ASME B148, BS) for industrial and nuclear applications.