Monitors - Import export

10 inch 26cm quad-vision monitor + 4 12v 24v 4 pin cameras + 3 5m cords + 1 20m cord 10.1 inch AHD 4ch Recorder DVR Car Monitor Vehicle Truck Night Vision Rear View Camera Security Surveillance Split Screen Quad

Specification : * 100% New * Input Voltage: 100V-240VAC (50-60Hz) * Output Voltage: 12 Volts DC * Amperage: 5Amps * Power: 60W * DC Plus Dimension: 5.5mmX2.5mm * C

Continuous dust monitoring in ambient air control system areas, silo areas, boiler houses, workstations. AirSafe 2 is an electrodynamic dust sensor monitoring leakages and dust concentration in ambient air in production facilities or workplaces. This versatile sensor allows you to keep under control your ambient environment. An alarm is generated when a threshold is exceeded. • controlled and selfmonitored system • calibratable alarm • prevents creation of dust explosion zones • dust concentrations in the ambient air are safely monitored • AirSafe 2 can be used as early detection for dust which could endanger the workplace adapted for applications in zone 22 dust • possible dust leakage from the process is quickly detected

Multisensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced probe electrification multisensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not necessary. • PRO version permits multichannel networked system for plantwide monitoring of emissions (for up to 32 sensors) • full colour, icondriven menu and display • two independent alarm set points • relative dust reading on clear scale 0100% • dust 'overrange' icon • security setting • digital signal processing • field upgradeable

Multisensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced probe electrification featuring long term data logging for process trend analysis and reporting. • reliable monitoring of leaking an broken bags in dust collectors • sensor configured remotely via controller • large graphic and numeric display • reduces filter maintenance intervals, process downtimes and filter costs

Stand alone cross stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. • emissions measurement (mg/m³) • advanced sensor design includes automatic drift checks • resistant to contamination • simple installation, setup and maintenance • external display and keyboard for easy setup • can be purged with instrument air providing lower cost of ownership • lower level of maintenance than traditional opacity systems • mg/m³ output, once calibrated

Standalone TÜV approved filter dust monitor suited to the measurement of filter emissions after bag houses, cartridge filters, cyclones etc. • reliable measurement of leaking and broken bags in dust collectors • external display and keyboard • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Standalone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0100%) after bag houses, cartridge filters, cyclones, etc. • reliable monitoring of leaking and broken bags in dust collectors • external display • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtimes and filter costs

Controller based filter dust leak monitor (0100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. where performance approvals are not required. • reliable monitoring of leaking and broken bags in dust collectors • sensor configured remotely via controller • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Controller based filter dust leak monitor (0100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. • reliable monitoring of leaking and broken bags in dust collectors • sensor configured remotely via controller • manual sensor drift checks probe check option for improved data integrity reduces filter maintenance intervals, process downtimes and filter costs

The LEAK LOCATE 662 is a digitally networked, multicompartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. • reliable monitoring of leaking and broken bags in dust collectors • sensor configuration remotely via controller • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Microwave sensor for contactless monitoring of material flows with trend monitoring. • detection of material clogging and material standstill • insensitive against material deposits • for any line diameter • compact (no separate electronics) • with ceramic mounting, usable up to 1,000 °C • usable in dust exzones

FlowJam T is a sensor for monitoring the flow of solids that are conveyed through thin pipelines. The sensor can be used for tubes made of electrically nonconductive material, such as plastic or rubber, with outside diameters between 4 and 25 mm. • mounted around the tube • triboelectric measurement • free crosssection • easy retrofitting

Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases.

The Cairsens© CO sensor allows specific pollutant measurement comparable to reference methods.

The last generation of Cairsens® micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1, PM2.5 and PM10 concentrations.

The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases.

MP101M beta gauge monitor with its optional optical particulate monitor.

Cairnet® device is a real-time standalone and networkable air-monitoring station including up to six Cairsens® microsensors. It is powered by solar panels and offers cellular communication.

The Cairsens© O2 + NO3 sensor allows specific pollutant measurement comparable to reference methods.

The Cairsens© SO2 sensor allows specific pollutant measurement comparable to reference methods.

Filter leak monitor suited to filter control applications after fabric dust filter type (baghouse) arrestment plant.

Standalone filter dust leak monitor (0100%) for filter emissions monitoring after baghouses, cartridge filters, cyclones etc. where performance approvals are not required. • reliable monitoring of leaking and broken bags in dust collectors • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

This device is ideal for mercury determination at varying sites.

With the new 8311, PFAFF INDUSTRIAL introduces a new generation of ultrasonic welding machines. With more than 30 years experience in rotary ultrasonic welding, the engineers at PFAFF have successfully developed this process even further. In addition to the regulation of speed and welding energy, the new 8311 allows the force measured during welding to be measured and kept constant - a true world first and a quantum leap in textile ultrasonic welding. Adjusting and handling the machine becomes much easier. The process becomes clearer, more reproducible and easier to understand. In short, the machine is taken to a new level.

The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site air quality.

High-strength material mix of thermoplastic/aluminium. Version: Black/bright. Note: We offer three different basic brackets for industrial monitors and touch panels: Compact: space-saving, with a swivel range of 60°. For loads up to 10 kg (static). With universal mounting plate. The basic bracket is suitable for mounting on tubes size Ø30 mm or 30x30 mm. By using the optional reducer sleeve 29040 they can also be mounted on other sized tubes (Ø20 and Ø25 mm or 20x20 and 25x25 mm). With rotary flange: vibration-resistant, lockable monitor bracket with an angle adjustment of 90° in 15° increments. For monitors / control units up to 25 kg (static). With universal mounting plate. The basic bracket is suitable for mounting on tubes size Ø30 mm. By using the optional reducer sleeve 29042 they can also be mounted on other sized tubes (Ø20 and Ø25 mm or 20x20 mm).

Wind speed measurement sensors The device measures wind speed and direction and is powered by its integrated solar panel. It also has a rechargeable lithium battery.

Multisensor dust monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zones. Advanced probe electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. • reliable measurement of leaking and broken bags in dust collectors • sensor configured remotely via controller • automatic sensor drift checks • automatic probe check for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs