Gang sawing machines - Import export

F.E.B.A. model F400 single knife automatic log slitter suitable for slitting adhesive & non adhesive tapes, kaptons, dense foams, PPL, PE, textiles, non wovens, TNT and similar materials with an outside diameter of 400mm. Standard features like sonar & laser technology allow for a fully automatic slitting cycle drastically reducing log changeover time. Proportional penetration speeds coupled with an automatic blade 'AXIS' angle offer the highest quality cut available. The model F400 can be equipped with a variety of optionals designed to enhance productivty and limiting operator fatigue. TECHNICAL SPECIFICATIONS Material Width 1.200 3.100mm Maximum Log OD 400mm Slitting Width 2mm 3.100mm Indexing Tolerance ± 0.05mm Blade Speed Range 10 1200RPM Material Speed Range 10 1200 RPM ALL F.E.B.A. SLITTING AND REWINDING SYSTEMS ARE MANUFACTURED IN ACCORDANCE WITH EUROPEAN EEC SAFETY AND HEALTH STANDARDS.

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

Avola building site table saw ZBV 500 S with height and tilt adjustment and safety guard. The new ZBV 500-S is a height and tilt adjustable building site circular saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with a high cutting height on the construction site. Above all, the increasingly used insulating material can be optimally processed in connection with the AVOLA special circular saw blade HM / A / PH (see above).

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

It relieves both human and the environment, and also preserves the valuable cutting tool. The ability to cut close to walls is outstanding. Thanks to its electric drive, joint cutting in indoor spaces is also among the special strengths of the COMPACTCUT 401 E, which is also characterized by maneuverability, durability and outstanding operator ergonomics. Whether cutting asphalt, concrete, making separation cuts, demolition work, tight construction sites or joint cutting in buildings - the powerful electric joint cutter with a 400-volt motor delivers excellent results under all conditions.

Professional mobile band saw with robust construction, automatic band tensioning mechanism and precisely guided folding cutting table for cutting large-sized aerated concrete blocks. The saw can be easily set up and operated by one person and is characterized by extreme cutting precision. The maximum cutting height is 650 mm.

THE large Cedima block saw for diamond discs up to Ø 1000 mm and a cutting depth of max. 425 mm. The lockable saw head is infinitely adjustable in height

The CTS-57 G is a table saw for quick and clean cutting of bricks, clinker, natural stone and similar materials.

A maximum cutting depth of 125 mm in one cut or up to 250 mm when plunge cutting is offered by this table saw. Miter or bevel cuts up to 45° are easily possible and ensure optimal applicability. The robust single frame with integrated conduit channels provides high stability and a longer lifespan. It can be easily handled by one person due to the foldable legs.

It has an integrated water spray system that ensures optimal saw blade cooling and immediate disposal of sawdust. Due to the extremely efficient working system the water consumption is low and it complies with current safety standards. Also the saw is very robust because of its welded steel construction. The table pad with non-slip rubber coating is also manufactured with great care and combined with the precisely running, easy-to-use cutting table with adjustable angle stop precise cuts are guaranteed.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

This powerful electrical drive is capable of handling up to 6.5 PS, making it the ideal choice for sawing concrete, stone, and masonry. The Coccodrillo 35 is safe to use in basements, rooms, and tight spaces, as it doesn't produce health-damaging exhaust fumes. It's easy to operate with a simple on-off switch and is electrically safe with PRCD protection. Additionally, the CARDI multi-function electronics provide soft start and overload protection, ensuring it complies with European and international regulations and standards.

Standard equipmentwith tilting alu sliding table 1000x800 mm Cutting height 424 mm Cutting length 700 mm Roller diameter 500 mm Saw band length 3720 mm a) for three-phase current 400 V, 50 Hz, motor power 1,3 KW b) or alternating 230 V, 50 Hz, motor power 1,3 KW only saw band, to be selected according to the type of stone material with jack rings and 2 rollers Sound emission Lpa according to DIN 45635, part 1651 on gas concrete and lightweight refractory bricks ...75 dB(A) on Poroton ...................................... 88 dB(A) Size LxWxH: 1000x1000x1800 mm Weight: 130 kg

Band saw machine for wood cutting

Double Column Bandsaws with linear guideways are ideal for MITRE cuts with different quantities. With the movement of the bow, it’s possible to cut between 90° and +45°. With height adjustment and hydraulic cutting, control allows the bow to go up over the material after the cut. All this process is controlled by a digital counter on the control panel and total duration for one cut decreases. Fixing the bow at any angle is controlled by the hydraulic brake system.

-RPM selection for different materials with the 2-speed motor -45° right hand to 45° left hand saw positioning, accurate and precise cutting in two directions -Coolant circulation to remove materials' chips and to cool the disc -Adjustable gear according to the size of the material -Comes with a stop rod for repeatable cuts -24 V low voltage system -Emergency stop button -Safety regulations, according to CE Standards -Moving saw protection guard -Motor protection kit -Burr-free cutting -Hassle-free performance

The Metlsaw NF range of plate saws are the premier saw for precision sawing of non-ferrous plate from 6mm – 300mm thick. Fully automatic sawing system Up to 12" thickness capacity 50 HP Arbor Motor Positioning (cut to length) tolerance to +/- 0.075mm Surface Finishes to 8 Micro-inch High speed close tolerance cutting Can eliminate/reduce secondary machining of parts Fast set up and part number memory Rapid sawing speeds Full size touchscreen operator interface PLC Controls by Rockwell Automation (AB) Easy Blade Change Available widths of 1.8M – 6M as standard

This Semi-Automatic Vertical Bandsaw is a large capacity machine that cuts aluminium, ferrous and non-ferrous materials.

The NCH plate saws are designed for quick and accurate cutting of bars and plates into strips of varying widths. This allows you to reduce inventories of cut-to-width stock and increase the flexibility of your sawing operation. Models are available in a wide range of sizes. High-productivity Automatic machines, with moving arc from 4 to 6 meters cutting length.

Bomar Ergonomic 275.230DG Standard Details: Heavy duty one-piece cast bow Precision control hydraulic downfeed Substantial vices, quick set lever operation Bow rotates 45-90-60° Easy to read mitre scale Carbide blade guide pads and rollers Heavy duty blade tensioning unit Heavy duty, 3 phase motor Re-circulating coolant pump Adjustable guide arm Heavy duty gear train Blade speed: 35 & 70 m/min 500mm length stop included

The Bomar Workline 410.280DGH is a semi-automatic mitre bandsaw and is an ideal basic model for the production of steel structures. The both-sided mitre cuts continuously adjustable within the 0–60° range, with a large, easy-to-read angular scale. This machine features also an easily movable clamping vice for mitre cuts and a full-stroke hydraulic vice with a tightening system. Bomar Workline 410.280DGH Standard Details: 2 way mitre – 60° right, 60° left Easy to read mitre scale DRO for mitre angle Long stroke hydraulic vice Powered bow raise Adjustable back off valve for optimising downfeed speed relative to material mass Control box mounted on swinging arm Simple, robust push button controls Variable blade speed 20 to 120m/min Dovetail sliding vice for mitre cutting 27mm blade width Bed height: 756mm

Karmetal OSA 300x380 PLC Technical Details: • PLC control panel • Heavy duty construction • Hydraulic vice • Mechanical top clamps • Inverter controlled blade speed 25 to 90m/min • Hydro mechanical blade tension • Fast approach • Adjustable hydraulic regulation of the bow descent rate • Inverter driven blade speed • Swarf conveyor • 1.4 metre roller conveyor

Heavy Duty Automatic Bandsaw for solid bar, bundles & general sawing with the following features: Vice feed automatic with encoder for precision length set Twin hydraulic vices clamp both sides of material Simple input of component length and number of pieces via touch screen Steplessly variable blade speed 17 ~ 67m/mm Hydraulic blade tension control for optimum blade life. Variable downfeed control. The touch sensitive control screen provides easy selection of precise bar length requirement for a precise cut off length. The auto head-elevation reduces index cycling time significantly. The Blade speed is set and adjusted by acting on the touch sensitive control screen. There are quick-adjusting carbide saw-band guides, there is an idle wheel motion protector, a hydraulic band tension control, a quick-action HYDRAULIC twin-vice (split vice) 3-jaw clamping, a unique two-way vice jaw and an automatic chip conveyor.

Equipment features: - Simple and easy operation - Processing of logs by sawing and splitting in one pass - Automatic removal of the material by means of a belt conveyor - Powerful 9.5kW electric motor for fast work even with larger logs with 50cm diameter - Hydraulic chain saw and log holder operation for even more fatigue-free work - Integrated hydraulic feeder belt to supply the saw blade machine with material Delivered without fluids Technical data: Feed conveyor belt (LxW): 2150 x 250 mm discharge conveyor belt (LxWxH): 3200 x 200 x 2200 mm Conveyor belt speed: 0,5 m / sec. Own weight incl. conveyor belt: 780 kg (670kg + 110kg) Packing dimensions automatic saw blade machine (LxWxH): 2000 x 1000 x 1200 mm Packing dimensions discharge conveyor (LxWxH): 1850 x 450 x 570 mm Packaging dimensions infeed conveyor (LxWxH): 1150 x 680 x 380 mm chain (STIHL): C3621 000 0077/0.375/1,5mm

DC 550 SK is a full automatic sawing machine which is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminum materials by means of double head sawing units equipped with Ø 550 mm of saw blades. Two-hand safety operation Equipped with CNC control system for precise angular adjustment Tilting range inwards 45° and outwards 22.5° Hydro-pneumatic saw feed Cutting accuracy +/- 0.1 mm 2 x pneumatic profile supports Windows based industrial PC and 15’’ LCD touch screen color monitor Facility to transfer the cutting list at ‘mdb’+'xls' format via USB and network Remote connection via internet and providing technical support Barcode printer & image print Automatic slicing feature Profile height measuring system (DC 550 SKH) The angle setting of the heads is ensured with servo control system The position setting of the moving head is en sured with servo control system STANDARD ACCESSORIES Equipped with saw blades 2 X Ø 550 mm

-RPM selection for different materials with the 2-speed motor -45° right hand to 45° left hand saw positioning, accurate and precise cutting in two directions -Coolant circulation to remove materials' chips and to cool the disc -Adjustable gear according to the size of the material -24 V low voltage system -Emergency stop button -Moving saw protection guard -Motor protection kit -Burr-free cutting -Precise cutting by centering the material with the double-sided pneumatic vice control -Comes with a stop rod for repeatable cuts

Used Metalworking Machinery GLOMACHT offers a wide range of machine tools and sheet metal machinery.Willing to sell or buy used or new industrial machinery? Share your power and let GLOMACHT get in charge of everything. For more info, please contact us: contact@glomacht.com Buy / Sell your machinery with us! SHARE YOUR USED POWER