Gas pumps - Import export

Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is reduced accordingly). The thickness of our spiral-wrapped silicone strip heaters is 2,2 mm. Also our gas and pump line heaters, most frequently used in the semi-conductor process, are shaped and pre-formed according to the object geometry to be heated. They are designed to regulate temperatures in order to prevent condensation in the line. Current applications here are Semi Conductors, Vacuum Chambers, Wafer Chucks, Valves, Exhaust & Pump Systems.

The barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.

Freek pump and gas line heaters for trace heating are designed to regulate temperatures in order to prevent freezing or condensation in the line. As with all our heaters, these can be designed and produced to your bespoke specifications. A most frequent application for gas & pump line heaters the semi-conductor process in which gases such as Tetraethyl Orthosilicate (TEOS), Boron Trichloride (BCl3), Aluminium Chloride (AlCl3), Chlorine Triuoride (ClF3) and Dichlorosilane (DCS) condense at low temperatures. Should this occur, it could result in wafer defect. Gas and pump line heaters consistently heat the lines and provide a simple heating solution and prevent condensation build up. The optimum line temperature will vary depending on the process.

Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction.

The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell

In order to be able to meet the individual requirements of our customers, we offer various types of spiral wound gaskets: For example, you can choose between standard versions with a smooth surface and various special models. All articles are based on a stainless steel strip and high-quality filling materials such as graphite and PTFE, which underlines the excellent quality standard. The spiral wound gaskets of billi are characterized by a constant elasticity during hot-cold cycles. Classical applications in the chemical industry include all types of gas lines, directional valves and pumps. Furthermore, spiral wound gaskets are the optimal solutions for pressure vessel openings in steam systems as well as low and high pressure in nuclear power plants. For the best possible functionality of spiral wound gaskets, the careful considered choice of model is of central importance: the versions with centering ring, for example, assures an ideal fit between the bolts.

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data.

Merecs develops individual test systems for heat pumps, gas, fluid and water systems. Our engineers & fitters for electronics, installation technology and mechanics build the systems completely from one source at our location in Steinfurt. The systems are then delivered and commissioned at home and abroad. Our range of products includes - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design

The tightening seal Capseal is made of polyethylene and designed specifically for gas cylinders. These seals have a one-piece tightening-type case structure, which consists of a round bowl, a locking mechanism, and a tail part. The bowl covers the side of the valve to prevent the possibility of connecting a tube to it and pumping out the gas. The internal locking mechanism operates based on a three-leaf collet and is protected from external mechanical impacts. The ribbed tail ensures reliable fixation of the seal on the cylinder preventing reversal movement of the tail. Additional protection provided for Clixar tamper-evident seals is a special laser marking applied through the thickness of the surface. It cannot be erased, replaced, or counterfeited without leaving obvious visible marks. Using the same method, the customized number is applied to the Capseal bowl, thus eliminating the possibility of replacing the seal and providing a convenient accounting option.

— For continuous feed water control — Increased efficiency of flue gas heat exchangers — Fewer pump circuits — Constant boiler water level — Minimum flow rate for cooling the feed pump is assured Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the extraction of the feed water/condensate — Consumes less power, more convenient to operate — Speed-controlled version for increased flue gas heat exchanger efficiency — Redundant pump for maximum reliability of supply — Preassembled for fast installation Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

This is a universal fuel pump remote control which controls 5 different fuel pump types. This product is designed for fuel service companies, it can substitute 5 remote controls by itself. With the DIP-Switches the user can easily switch to the desired pump type and control the pump just like with the original remote control. This gas pump remote control can handle five different types of fuel dispenser: • Tokheim WWCT, COCA • Satam • Wayne Dresser IGEM • Tatsuno Benc • Adast Features • High power infrared (up to 4 m working distance) • 5 in one remote controller • Durable case • Battery saver function • Indication LED

Closed circulation vacuum system is consisted with liquid ring vacuum pump and compressor, liquid and gas separator tank, heat exchanger, instrument and valves, internal pipeline, and common base plate. The pumped gas enters the liquid ring vacuum pump/compressor from the pump inlet, after compressed by the liquid ring vacuum pump/compressor, the gas will enter to enter the gas-liquid separator together some of the working liquid. Inside the gas-liquid separator, the gas and liquid are separated, and the gas is discharged from the pump outlet, and the working fluid go from the heat exchanger and enter the liquid ring vacuum pump/compressor for recycling.

A pump is a mechanical device for moving a fluid from a lower to a higher location, or from a lower to a higher pressure area. The fluid can be any type of liquid or gas, and pumps may be classified in many ways according to their purpose, specifications, environment, design, etc. Pumps are used in a wide range of industrial and residential applications. Pumping equipment is extremely diverse, varying in type, size, and materials of construction. Classifications and Types: Pumps may be classified on the basis of the applications they serve, the materials from which they are constructed, the liquids they handle, and even their orientation in space. All such classifications, however, are limited in scope and tend to substantially overlap each other. A more basic system of classification first defines the principle by which energy is added to the fluid, goes on to identify the means by which this principle is implemented, and finally delineates specific geometries.

PR9141 series hand-held pneumatic pump can be used in the laboratory or field environment, featuring simple operation, smooth buck-boost, fine adjustment, easy maintenance and leakage prevention. The built-in oil and air isolation device can effectively avoid the pollution of the pump body and prolong the service life of the equipment. It is mainly used to calibrate the pressure (differential pressure) transmitter, the pressure switch, the precision pressure gauge, ordinary pressure gauge and oil-free pressure gauge.

The 7G injectors are pumps for pumping and mixing various media. The basic principle is simple: a gaseous media is used for the actuator; this media escapes at high pressure and high speed from a nozzle. During this process the media from the surrounding area is also drawn along and can be supplied to the downstream production process. Due to their design, the injectors do not need moving parts, as a result they have very low wear and are robust.

Application General purpose, Drinking water, Steam, gas, chemical, food, compressor & pump applications.

Application General purpose, drinking water, steam, gas, chemical, pharmaceutical, food, compressor & pump applications.

Application General purpose, Drinking water, Steam, gas, chemical, food, compressor & pump applications.

Application General purpose, Drinking water, Steam, gas, chemical, food, compressor & pump applications.

Material Expanded natural graphite (>99% graphite purity), stainless steel insert (AISI 316; 0.1 mm) Application General purpose, drinking water, steam, gas, chemical, food, compressor & pump applications.

Material Expanded natural graphite (>99% graphite purity), stainless steel insert (AISI 316; 0.1 mm) Application General purpose, drinking water, steam, gas, chemical, food, compressor & pump applications.

Vertical semi-submersible pumps are designed to solve the problem of pumping liquid out of a tank when a part of the pump is within the pumped medium. Pump units are used with the engine speed up to 3,000 rpm. Therefore, the temperature conditions for semi-submersible pumping units are up to 250 degrees. Centrifugal semi-submersible pumps are widely used both in petroleum refining (petroleum and drainage pumps) and the chemical industry, and in the food industry. They are used for transit of various liquids and mixtures including explosive and flammable fluids (oil and gas products, etc.). Semi-submersible pumps are in between surface and submersible units and combine all their advantages, nevertheless, a semi-submersible pump is not designed to carry out specialized tasks for which these two types of units were created. Semi-submersible pumps consist of an electric motor, a working section and immersed sections. The engine is placed on a base plate

Renewable energy sources like solar and wind are ideal for powering equipment in remote locations. These types of off-grid systems are commonly used to power equipment for a variety of different industrial applications. Common applications include lighting, wireless surveillance cameras, sensors, environmental monitors, traffic signals, oil/gas pipes network, pump stations, telecommunication equipment, and anything else that requires reliable power in a remote location. NSBox-SUN Outdoor Access Node is used to deploy protected autonomous or semi-autonomous outdoor applications in the area with no 24/7 electricity available and solar panels can be installed. Typical application for NSBox-SUN is wireless surveillance system that is powered from street lighting where AC power is available only at the night time. NSBox-SUN can be even used if there is no AC power at all if PDs connected to it have low power consumption that can be filled up with energy

The BCpreFerm is a whole gas analysis for scale-up processes. Made for the analysis of metabolic processes, the model is composed of up to 6 CO2- and O2-senors, a BACCom data multiplexer box, and the BlueVis-software for automatic data recording. Growth is controlled through a parallel analysis of CO2 and O2, a display of OTR, CTR and RQ, and through defined trial conditions. The system uses a modular design which enables connection to shake flasks, as well as to fermenters. It can also be attached to existing bioreactors. The use of additional gas coolers, lines, pumps and valves, and the complicated processing of gases is no longer necessary. The instrument can be used for cultivations in shake flasks and fermenters and further applications.

The GAS TESTER is our lowestprice entrylevel model for monitoring gas concentration. Naturally we have installed our proven analysis technology in this product as well. Features reliable concentration measurements compact and handy design easy operability argon and krypton use optional data storage Only a small quantity of gas is required. Sampling is executed with a special gas supply pump. The GAS TESTER is suitable for quality control of IG units with argon or krypton as the filling gas. If you desire to also analyse other gas types or gas mixtures, you should chose one of our other analysers.

The gas detetctor pump for easy usage in difficult situations The manual Dräger Accuro is used for short time measurements of Dräger tubes. Often measurements take place in extreme situations, for example: ladders, shaft or under heavy respiratory protection. The gas detector pump Accuro is easy to operate with one hand The gas detector pump Accuro is easy to operate with one hand and enables reliable measurements at hardly accessible places. This pump is a bellow pump in which the air is sucked stroke wise through the tubes. The body of the pump consists of a bellow, which is pressed together completely for measurements. After release of bellows, the sucking drains automatically and the relevant measured gas is sucked by the insert tube. The sucking process is finished when the body of the pump is completely open again. The end of stoke can be read by a pressure controlled display in pump head of Dräger Accuro. Data sheet

The compact and reliable gas detector GasAlertMax XT of the company BW-Technologies provides effective protection against 4 different dangerous gases at the same time. Due to simple one-button operation the device is perfect suitable for a broaden range of industrial applications. Moreover, thanks to intelligent, newest integrated pump technology long distance samples in containers or enclosed rooms are possible. Features of GasAlertMaxXT II: Permanent display up to 4 gases concentrates in real-time at once Self-test of all functions for sensors, battery, electronic and acoustic / visual alarm Impact- and water-resistant Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Free adjustable alarm points Integrated gas sampling pump with reliable membrane technology Setting of various languages (German, English, French, Spanish, Portuguese) Technical data Dimensions (cm): 13.1 x 7.0 x 5.2 Weight (g): 316 Application temperature:...