Gas threading - Import export

* Automatic threading machines for in-line and stand-off operation, suitable for PVC electrical, gas and water pipes (produced in single or double extrusion). * Outside threading (through removal of material) simultaneously on both ends. * Independent motorization of the two threading groups. * Adjustable threading length. * Clamping of the pipes during the threading phase. * High output. * Simple utilization, efficiency, minimal maintenance

VOGELMANN PROFI - ARGON / CO2 GAS REGULATOR PROFI The universal VOGELMANN gas regulator allows you to reduce the pressure of gases taken from the cylinder to the required operating pressure.It allows to obtain the pressure automatically at the possible constant level, regardless of changes in inlet pressure. APPLICATION Single-stage reducer most often used in welding during MIG welding or TIG welding machines that require a gas shield. TWO MANOMETERSIt is equipped with two manometers - the first shows the pressure in the cylinder, the second shows gas flow per minute. GAS TYPE It is designed for technical gases such as argon (Ar), carbon dioxide (CO2) and MIX of these gases (Ar / CO2), connection: 6,3mm. UNIVERSAL The gas regulator can be connected to any standard cylinder with a W21.8 x 1/14 thread TECHNICAL DATA Gas type: CO2, Ar, MIX Inlet thread: W21.8x1 / 14 Nut thread at outlet: G 1/4 Outlet connection: ø6,3mm Inlet pressure: 185bar Outlet pressure: 0,5-10bar Throughput: 15 m³/h

Made of A3 Steel Material, Zinc Coated Package Content: 2Pcs x Gas Spring End Fitting Female Thread Dia.: M6 / 0.24"; Hole Dia.: 8mm / 0.31" Gas Spring Strut Joint connector End Fitting. We can supply forging and CNC machining Eyelets / Clevises,small & medium size are forging and cnc machining, large sizes are CNC machining, you can send your requested drawing, we can check if has forging end fittings. It is a good replacement of gas springs Ball Strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

Available in 8m, 12m, and 16m Lengths Comes complete with female BSP 3/8 Left Hand thread female gas fittings each end. Conforms to BS 5120 BN 3212/2

Countertop built-in stove gas connection part used in kitchens