Electrical engineering - Import export

The “casing” sector for the electro and electronics industry was developed as a result of demand from the lighting industry for transformer housing for NV lights. Here we can emphasise our housings for electronic mounting devices. Individual customer requirements can be realized cost-efficiently by using insert adapters. Other products for the electrical industry are connectors, strain relief and cable fastening.

Since the invention of the “Schniewindt grid” in 1902, we produce high voltage resistors and are thus among the pioneers in the electrical industry. Due to continuous development of our products and new developments according to the respective needs of the market, we are now one of the leading manufacturers of electric heating equipment, resistance equipment and sensors for current and voltage measurement

As well as the standard units, we design and produce individual high pressure water jetting systems in accordance with our customer needs. The configuration is flexible to respective requirements. Whether it is mobile or stationary, with diesel engine or electric motor – our experts find the best solution even for complex applications or problematic work conditions.

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For almost all common closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, public services e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • With strong chain and snap hook • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows eight different profiles to be activated. • Made of zinc casting (GD-Zn)

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)

• Very slim, light-weight construction for shirt or coat pocket, with clip • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With ultra-bright LED torch in the clip • The twist mechanism allows four different profiles to be activated. • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • The twist mechanism allows eight different profiles to be activated. • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Particularly easy-to-handle version • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Plastic adapter with 1/4" bit-holder and retaining chain, approx. 20 cm • Bit (1/4") made from high-quality tool steel and specially hardened • Made of zinc casting (GD-Zn)

Arc magnet is one of the basic shapes of Neodymium magnet, also called segment magnet, they are widely used for electric motors, PM motors and generators in the electrical engineering and electric vehicles etc. Arc magnet can be made with high Hcj materials to match special motor applications, it can be consistency for torque performance and ground to meet high precision and concentric requirements.

System for the impregnation of electomagnetic coils, e.g. of electric motors, transformers, generators Impregnating in electricla engineering means applying an impregnating agent in gaseous or fluid form to a porous body in order to insulate it electrically, i.e. that reliable protection against electrical breakdown is provided even when the thickness of the insulating layer is small. For each application HÜBERS provides appropriate process. HÜBERS offers all relevant process variants including vacuum impregnation, vacuum-pressure impregnation and atmospheric impregnation and of these coupled with the use of the many different impregnating agents such as varnish, resin, oil, wax, gas etc. The processes of evacuating the parts prior to impregnation and if necessary of vacuum-drying the impregnated parts are matched to the properties of the parts and ensure that the agent wets the walls of the pores properly and fills the cavities completely.

Our isothermal forging presses produce sophisticated, heavy-duty components for high-tech products. We furnish our customers with rst-class solutions including control systems for the ne-tuning of pressing speeds. Our presses are designed for high-precision applications indispensable in the aircraft/aerospace and medical engineering industries. The challenge here is to manage pressing speeds of 0.01 mm/s in controlled operation, which is ensured by our own electrical and hydraulic control engineering Siempelkamp also oers plants to be used for isothermal forging. They comprise the furnace, the feed manipulator, the forging press, the die heater, the hydraulic drive system and the entire automation technology. The plant control for isothermal forging presses monitors and documents the process parameters in compliance with the certication standards to be observed in the aircraft industry.

Electrical and Instrumentation Engineering

Bright Chrome Plated Zinc Alloy Handle,Padlock version available,Easy Installation,ROHS compliance

Bloack Powder Coated Aluminum Alloy Handle, Lock Plate, Housing, Steel Cam,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Black PA Wing Knob and Zinc Alloy housing and insert,different keys available,Housing Length 18mm,30mm,40mm available,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Blue gray powder coated ( RAL 7012 ) ZDC housing,PA handle,Padlockable,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and PA6 versions available,Housing Lengths 18mm,28mm,36mm,62mm available,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and PA6 versions available,Key Alike and Key Different available,Head Diameter Ø28,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Bright Chrome plate Zinc Alloy Quarter-Turn Lock,different Insert Type available,LH/RH available,Head Diameter Ø28,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,Housing Lengths 18mm,28mm,36mm,62mm available,different Insert Type available,Head Diameter Ø28,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Black Powder Coated or Chrome Plated Zinc Alloy Latch,with Adjustable Grip,Suitable for Ts= 1-11mm Panel,Door Cutout: 71*25mm and 91*35mm ,Easy Installation.ROHS compliance.

Black Powder Coated or Chrome Plated Zinc Alloy Latch,Different Insert Type available,Head Diameter Ø32,Door Cutout: Ø22.5*19.5mm,Vibration Resistant,Easy Installation,ROHS compliance

Black Powder Coated or Chrome Plated Zinc Alloy Latch,Different Insert Type available,Head Diameter Ø28,Door Cutout: Ø22.5*19.5mmVibration Resistant,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,5 different Insert Type available,Head Diameter Ø20.8,Door Cutout: Ø16*13.5mm,Vibration Resistant,Easy Installation,ROHS compliance

Black Powder Coated or Chrome Plated Zinc Alloy Latch,with Adjustable Grip of 1~50 mm,Door Cutout: 86*25mm,Easy Installation.ROHS compliance.

Black Powder Coated or Chrome Plated Zinc Alloy Latch,with Adjustable Grip,Door Cutout:41*17.5mm and 73*30mm,Easy Installation.ROHS compliance.