Gears - Import export

Measuring machine for determining discs double clutch DQ381

The very robust design of the RPL line allows for high torsional rigidity. The planetary gears are ideally applicable even at high radial or axial load. Thanks to the ratio of i=10 in the first planetary stage, the 2-stage version may reach transmissions of up to i=100. Gear housing Ø (mm): 90 Nominal output torque (Nm): 37-60 Acceleration torque (Nm): 74-120 Emergency stop torque (Nm): 111-180 Ratios: 1-st.: 3, 5, 7, 10 2-st.: 15, 25, 30, 35, 50, 70, 100 Circumferential backlash: 1-st.: <=8 arcmin 2-st.: <=11 arcmin For further information see our product detail page.

The low product-weight of the RPS line guarantees high power densities. Thus, the planetary gears of the RPS line are applicable for high torque requirements as for example in axis movements at dynamic operation. Up to three planetary stages allow for a large selection of transmissions. Gear housing Ø (mm): 60 Nominal output torque (Nm): 26-39 Acceleration torque (Nm): 52-68 Emergency stop torque (Nm): 70-88 Ratios: 1-st.: 3, 4, 5, 7, 8 2-st.: 12, 15, 16, 20, 25, 32, 40, 49, 56, 64 3-st.: 80, 100, 125, 160, 200, Circumferential backlash: 1-st.: <= 10 arcmin 2-st.: <= 12 arcmin 3-st.: <= 15 arcmin Torsional stiffness (Nm/arcmin): 1,5 For further information see our product detail page.

The very robust design of the RPL line allows for high torsional rigidity. The planetary gears are ideally applicable even at high radial or axial load. hanks to the ratio of i=10 in the first planetary stage, the 2-stage version may reach transmissions of up to i=100. For further information see our product detail page.

The low product-weight of the RPS line guarantees high power densities. Thus, the planetary gears of the RPS line are applicable for high torque requirements as for example in axis movements at dynamic operation. Up to three planetary stages allow for a large selection of transmissions. For further information see our product detail page.

The very robust design of the RPL line allows for high torsional rigidity. The planetary gears are ideally applicable even at high radial or axial load. Thanks to the ratio of i=10 in the first planetary stage, the 2-stage version may reach transmissions of up to i=100. Gear housing Ø (mm): 70 Nominal output torque (Nm): 23-24 Acceleration torque (Nm): 46-48 Emergency stop torque (Nm): 69-72 Ratios: 1-st.: 3, 5, 7, 10 2-st.: 15, 25, 30, 35, 50, 70, 100 Circumferential backlash (arcmin): 1-st.: <=8 2-st.: <=12 Torsional stiffness [Nm/arcmin]: 2,80-3,30 For further information see our product detail page.

The low product-weight of the RPS line guarantees high power densities. Thus, the planetary gears of the RPS line are applicable for high torque requirements as for example in axis movements at dynamic operation. Up to two planetary stages allow for a large selection of transmissions. Gear housing Ø (mm): 40 Nominal output torque (Nm): 14-16 Acceleration torque (Nm): 23-25 Emergency stop torque (Nm): 34-36 Ratios: 1-st.: 4, 5, 7, 8 2-st.: 16, 20, 25, 28, 32, 35, 40, 49, 56, 64 Circumferential backlash: 1-st.: <=15 arcmin 2-st.: <= 19 arcmin Torsional stiffness (Nm/arcmin): 1,0-1,1 For further information see our product detail page.

The LEAX planetary gearboxes in the LPG25 and LPG40 series are helical planetary gearboxes with particularly smooth running. This makes them ideally suited for use in smoothing units and calender systems in the plastics industry. Thanks to the LEAX LPG gearboxes, plastic sheets can be produced without chatter marks, which are used in displays of all kinds. LPG gearboxes are available as 2, 3 or 4-stage versions with a wide range of transmission ratios.

The LEAX planetary gearboxes in the LPG25 and LPG40 series are helical planetary gearboxes with particularly smooth running. This makes them ideally suited for use in smoothing units and calender systems in the plastics industry. Thanks to the LEAX LPG gearboxes, plastic sheets can be produced without chatter marks, which are used in displays of all kinds. LPG gearboxes are available as 2, 3 or 4-stage versions with a wide range of transmission ratios.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

Eickhoff gear solutions for bucket wheel excavators / stackers / reclaimers are characterised by a compact design, high adaptability and low weight. The robust gearboxes are perfectly matched to the requirements and ensure maximum availability for the mining and transport of raw materials. Our gear units are used as bucket wheel drive, travel drive or conveyor drive. When replacing existing drives, in many cases the weight can be reduced even further by increasing the performance. Advantages at a glance: — Customized solutions — Compact and weight-optimized construction — High power density — Reliable and low maintenance

Eickhoff offers application-specific solutions for winch systems in the field of lifting and conveyor technology. Even torques of over 2500 kNm are no problem. Our planetary gearboxes are characterised by a compact design and high power density, which is particularly advantageous in space-critical fields of application such as the maritime sector. The direct integration of our gearboxes into the rope drums can be realised individually. Due to the high efficiency of the planetary and spur gear units, they operate with extremely low losses. Based on our modular system, solutions can be derived individually adapted to the respective application. Advantages at a glance: — Compact design — High efficiency — Reliable and low maintenance — Customized solution

Eickhoff planetary gearboxes are ideal for driving large industrial plants. With our roller press gears of the new ED series we cover a wide torque range from 220kNm up to more than 7,000kNm. The special non-contact sealing system also makes our gearboxes very low maintenance. Convince yourself of the efficiency of our roller press gears, which are used for the crushing and grinding of raw materials. If necessary, we will adapt the gearbox to your requirements and develop the entire drive concept together with you. All our gearboxes can be equipped with an additional sensor system, which enables a permanent monitoring of the operating status. This allows operation-relevant risks to be detected at an early stage in order to counteract a possible unexpected machine failure. Advantages at a glance: — Compact design with highest power density — Reliable and low maintenance — Flexible design variants and accessories — Large capacity range

Sophisticated drive concepts for ball mills and rotary kilns require powerful solutions. Eickhoff offers different gear solutions for the various drive concepts established in the field, such as side drive, central drive and direct drive. In addition to the robust Eickhoff helical gearboxes, our ED planetary gearboxes are preferred, especially for a central drive. They offer a compact solution with extremely high power density and are therefore also leading from an economic point of view. Even torques of over 7,000 kNm can be realised. Typical applications are the crushing of raw materials as well as the burning of cement clinker. The gears are characterised by a long service life and high power density.

The unrestricted availability of energy is playing an increasingly important role. Highly efficient gas or diesel generators, so-called gensets, are used as power generators, e.g. as emergency power generators in hospitals or as temporary power suppliers in areas that are difficult to access. Another area of application is large data centres, where the unrestricted and uninterrupted availability of electricity must be guaranteed. Gensets ensure the power supply in any situation, even under extreme conditions. Our genset gearboxes are connected between the motor and the generator, so that a frequency adjustment for the required power grid is achieved. It is possible to adjust the frequency from 50Hz to 60Hz as well as from 60Hz to 50Hz. The speed transmission is highly efficient, as the single-stage spur gears guarantee a high efficiency of >99%. The use of a labyrinth sealing system also means that the drives require very low maintenance.

Two-stage gear drive with solid shaft Gear Type: SN2 Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN2F Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN12FX Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Modular single-stage gear drive with or without solid shaft Gear Type: SN5VH Motor Type: Three-Phase and Direct Current Mounting: Foot or flange Ausgangswelle: Hollow shaft or solid shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

The right drive solution for every challenge: The SN3F gear series impresses with its compact dimensions and flexible application range. The flange-gear is available with solid shaft as well as with hollow shaft. The geared motors are available as three-phase or direct current versions and can be equipped with brakes or pulse generators (on request). SN3F-Gear types: SN3F / SN3FH / SN3FL / SN3FLH — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Solid (SN3F / SN3FL) or hollow shaft (SN3FH / SN3FLH) — Ratios: 5; 7; 11; 12; 15; 17; 20; 24; 30; 32; 38; 50; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN19FH Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN19H Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN12FHX Motor Type: Three-Phase Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN10FH Motor Type: Three-Phase Mounting: Flange Shaft design: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN6FH Motor Type: Three-Phase Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN13FH Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN12FH Motor Type: Three-Phase, Direct Current and Permanent Magnet DC Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.