Slips - Import export

Self-adhesive conformable anti-slip tape for securing uneven tread surfaces, e.g. made of checker or lens plates. • Self-adhesive conformable anti-slip tape for improved safety of paths and treads • Suitable for indoor and protected outdoor use • The conformable aluminium tape adapts to uneven surfaces and is particularly suitable for surfaces made of checker or lens plates • Areas of application are steps, ramps, industrial floors and treads on machines and vehicles • In accordance with ASR A1.5/1.2 "Floors" to DIN 51130 slip resistance (R group) R13

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

When rolling off a load over the floor, the heavy load can slip uncontrollably on the smooth warehouse floor. There is considerable risk of accidents. Expensive equipment can be damaged under their own weight and may require timeconsuming reprocessing. secutex turning mats (see figure above) are completely slipresistant. The turning manoeuvre can be performed safely and smoothly.

Versatile The nonslide diamond surface of Solid is available in two variants. AGO-Solid: In standard sheets with dimensions of 2,100 x 500 mm or cut to size. One-sided rubberized. Solid-Topsoft: In rolls max. 400 m x 1,550 mm. Smaller rolls are available on request.

97% polyester, 3% elastane. Cute animal designs for boys and girls. Super-soft and cuddly in pretty gift box. With anti-slip print. One Size (babies and toddlers)

56% wool, 20% polyacrylics, 12% polyamid, 10% alpaca wool, 2% elasthane For teens, ladies and men. Beautiful alpaca-fluffy quality. Full-plush lined. With anti-slip print. Good as bed sock as well.

63% wool, 25% polyacrylics,10% polyamid, 2% elastane These wool socks with 63% sheep's wool have a roughened inside which makes them amazingly cuddly and warming. The particularly high portion of wool meets even the highest standards. Enjoy all benifits of the natural fiber wool at a surprisingly low price. Comfy wearing comfort is granted with this socks! With anti-slip print - great as home socks!

Cute baby socks with regularly changing designs. Comfy and warm by full-terry-quality and with anti-slip print under the sole. All models Ökotex certified (class I) and absolutely free of any harmful substances. With high proportion of skin-friendly cotton and a little polyamide for a longer durability.

78% cotton, 20% polyamide, 2% elastane; or 75% cotton, 20% polyamide, 2% elastane. Full-terry quality. Soft and warming. Sole with big anti-slip print. Easy sizing by instantly visible size marking (differently colored anti-slip prints; red = 35/38, green = 39/42, blue = 43/46). Perfect for hospitals, retirement homes, sport clubs... * 2-pack. Sizes: 35-38 (red print), 39-42 (green print), 43-46 (blue print), 47-50 (grey print)

Versatile The nonslide diamond surface of Solid is available in two variants. AGO-Solid: In standard sheets with dimensions of 2,100 x 500 mm or cut to size. One-sided rubberized. Solid-Topsoft: In rolls max. 400 m x 1,550 mm. Smaller rolls are available on request.

Versatile The nonslide diamond surface of Solid is available in two variants. AGO-Solid: In standard sheets with dimensions of 2,100 x 500 mm or cut to size. One-sided rubberized. Solid-Topsoft: In rolls max. 400 m x 1,550 mm. Smaller rolls are available on request.

49% wool, 22% polyacrylics, 21% polyester, 6% polyamide, 2% viscose. Anti-slip print! No shrinking. No felting. In pretty (assorted) mélange-colors. 2-Pack. Sizes: 35-38, 39-42, 43-46, 47-50

75% cotton, 22% polyamide, 3% elastane NEW DESIGNS! Unicorn and Pilot (available from End of September) Warming full terry quality. Hand linked. With Anti-slip print on soles and knees! Makes baby’s first crawling attempts more safe and comfortable. With super-cute bottom print! Sizes: 62-68, 74-80, 86-92 Motives /Sizes: Guardian angel: 62-68, 74-80, 86-92 Pirate: 62-68, 74-80, 86-92 Pilot: 62-68, 74-80, 86-92 Unicorn: 62-68, 74-80, 86-92 Car (remaining quantity): 62-68, 74-80

80% viscose, 17% polyamide, 3% elastane.Viscose made of bamboo cellulose. Very low fit - invisible in shoes! With ripp-knit for particular well fit and silicone pad at the heal prevents slipping. Each pair on card with separate label. 3-pack/1 color.  Sizes & colors: 35-38, 39-42, 43-46 / black, white, beige Being super-soft and breathable viscose made of bamboo cellulose is the perfect innovation for the fabrication of modern textiles. Further on bamboo is a fast growing, renewable material. Therefore textiles made of bamboo viscose are the responsible choice to treat our environment with care. Please notice dued to the particulary fine material those socks may show little flaws earlier then socks made of other materials we offer. 

With non-slip foam underside and fabric surface. Non-slip. • Mouse pad with non-slip foam underside and textile surface

Extra flat mouse pad with a non-slip surface so you can easily position the cursor. • Extra-thin mouse pad • With velvety surface

• The indestructible water pump pliers, with safety box joint for highest stress • Double-toothed jaws • Cogs additionally induction hardened • Optimum jaw geometry with self-locking serration • Gripping capacity 40% above ISO by means of arch-shaped pitch adjustment • Ideal fulcrum, minimum effort • Finger trap protection for safe work, prevents injuries caused by squeezing • Box joint with wide guide surfaces • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of chrome vanadium steel, forged, oil-hardened

Original Palgrip® pallets from Craemer offer unparalleled smoothness and tracking on roller conveyors or chain conveyors. The abrasion-resistant anti-slip plates provide excellent slip resistance on the deck or under the runners. The high quality Palgrip® grain structure ensures an absolutely secure hold even in damp conditions. Palgrip® provides an all-round reliable solution to your logistical requirements. Only available from Craemer. The Palgrip® anti-slip coating is resistant to cold and heat, from -30°C to +40°C. Compared to common plastic surfaces, Craemer Palgrip® anti-slip sheets offer absolute slip resistance even in high humidity thanks to their grain structure. The unique Palgrip® anti-slip panels are made from high quality HDPE and are permanently part of the deck and the anti-slip runners will last the lifetime of the pallet. Even in an inclined position, your load remains static on the pallet deck

We offer quality slip rollers, keel rollers, rolls, wheels among other products for the boat trailer industry. Our products are certified and tested according to the latest European norms and quality standards. More information about our products and services can be found in our catalogues. Do you have questions about our products or do you want to request a quote? Please contact us. We have the right accessory for your boat trailer!

Equip your ladder with this temporary stainless steel securing device. This ladder safety solution prevents your ladder from tipping and slipping. It is simply clamped between 2 ladder rungs (at least 250 mm wide) using a stainless steel spring mechanism. Temporary ladder securing device Suitable for use with all standard ladders Prevents slipping and tipping Simply clamp it between 2 rungs Designed for rungs at least 250 mm wide

Max.torque 0.4 N ･ m Allowable rotation speed up to 400 rpm Lifetime 1+ mio. cycles available

Max.torque 0.4 mN ･ m Allowable rotation speed up to 2,000 rpm Lifetime 10+ mio. cycles available

• overall length: 29 cm, blade dimensions: 11,5 x 9 cm • ergonomic, non-slip handle • for intensive use • special feature: metal is overmolded with handle material and thus forms an extremely stable connection

Friction Torque Limiters and Couplings are designed to slip during a torque overload, while still transmitting the adjusted torque.

In film or flexible packaging processing, the COF (coefficient of friction) is a limiting factor for processing speeds. This is due to the tendency of films to adhere to metallic or other film surfaces. Slip agents considerably reduce this effect and provide for more efficient production conditions.

The perforated metal planks, type BN-G “Noppe, geschlossen”, the punched nobs pressed upwards are closed and offer high slip resistance. BN-G gratings are often used in indoor environments and there, where, on the one hand, a closed surface is desired and on the other, good accessibility must be ensured.

The perforated metal plank type BZ offers a high degree of slip resistance due to its serrated surface structure. For this reason, the BZ plank is especially suitable in those environments, where fats and oils are used.

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Slip coupling

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.