Stainless rods - Import export

stainless steel*ground surface*Ø 12 mm

1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

With the new EMX model range of electric steam boilers, CERTUSS offers you twice the steam output as before with a significantly smaller footprint. Electric steam generators from CERTUSS are heated by stainless steel heating rods with a large heating surface. The output of the heating elements is regulated continuously via semiconductor contactors. One energy-efficient advantage is the immediate modulating output adjustment to the actual steam demand during the operating cycle. For greater steam demand of up to 640 kg/h or fluctuating steam loads, several ELECTRO steam generators can be cascaded in series. Multiple systems like this are an especially economical solution. Our compact electric steam systems feature built-in feed water tanks and feed water pumps. They require very little space and have a short heat-up time. Steam systems are also available as a unit with water conditioning equipment installed at the factory.

The electrical steam generators E 100 M – 120 M from CERTUSS offer you impressive output in two output capacities of 100 - 120 kW heat output. They are compact, economical and have a high output. All electrical versions do not require a permit for installation and use in Germany. Heating: Electrical heating rods Steam output 135 – 160 kg/h The sizes: E 100 and E 120 - In two output capacities of 100 - 120 kW heat output. - Fully electronic pressure and output control. - Compact stainless steel heating rod with low heating surface load, placed laterally on the pressure body for easy access. - Constant network load without consumption peaks. - Integrated multifunction display. - Multilanguage plain text indication.

A two-piece stainless steel rod (1.4301), coupling (bottom adapter) for spindle and shaft and square cap (accord. to DIN3223 C or E) made of stainless steel AISI 304. Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques up to 1000Nm (oval type wedge gate valve with square tube size 30mm). Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and either a universal combi bell (Form C) or a universal bell (size Ø80mm or Ø100mm (Form E)). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter/sealing insert.

A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 250Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

Telescopic Spindle Extension T3 - Stainless steel (DIN3223 C and E) A two-piece stainless steel rod (1.4301), coupling (bottom adapter) for spindle and shaft and square cap (accord. to DIN3223 C or E) made of stainless steel AISI 304. Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques up to 1000Nm (oval type wedge gate valve with square tube size 30mm). Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and either a universal combi bell (Form C) or a universal bell (size Ø80mm or Ø100mm (Form E)). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter/sealing insert.

A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 500Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter

This stainless steel rod, which is manufactured completely from stainless steel (Ø 42 mm), is used to install building components and (sub)structures on a roof surface. Our ABS UniMount is a flexible solution which can be used to install solar panels and photovoltaic modules, air conditioning systems and similar components. It can can either be installed on a concrete or steel surface. Base plate (130 x 130 mm) + welded-on mounting rod (Ø 42 mm) Female thread (M 10) at the top end For steel surfaces with a depth of at least 5 mm For horizontal and vertical loads of max. 3 kN Incl. stainless steel installation set