Buttons - Import export

Our range of vandal resistant pushbuttons is very wide to offer you the best possible choice. With our handy configurator you can quickly and easily put together the perfect pushbutton for your needs and request it directly. New: an individual engraving of the push-button cover is possible for push-buttons of the S1AGQ series with mounting diameters of 16mm, 19mm and 22mm. In addition to the individual configuration of our three basic series, we also offer you the option of manufacturing completely customized pushbuttons in individual colors, engravings and adapted technical specifications. Simply send us your desired requirements by e-mail. Our engineers will configure your suitable pushbutton and send you an offer. If you have any questions, we will of course be happy to answer them and provide you with comprehensive advice on selecting the right pushbutton for your application.

94% cotton, 5% polyamide, 1% elastane. 10-gage. Hand linked. Real heal. Fits the current country-fashion. For women and men. Sizes: 35/38, 39/42, 43/46 Colors: natural mélange, silver mélange

Our hygiene area mainly includes button brushes and handle brushes. They are boil-proof, acid and alkali-resistant and have a long service life. They are often used in the food industry. Different colors are used to divide into different hygiene areas.

The semi-finished products manufactured by Embro GmbH are optionally available with an electrical connection. In addition to the many possibilities of placing different elements on carrier materials with special embroidery processes, Embro offers splicing or soldering techniques for perfect and cost-effective connections. The parts are crimped or soldered together as standard. The introduction of thermal switches, NTC or other cable solutions is also no problem. Special connector solutions can also be implemented. This means that the textile semi-finished products are plug & play ready upon delivery. #service #contacting #b2b

This force measurement chain was developed for applications where a low cost solution is more important than achieving high levels of accuracy. The sensors strain gauge technology allows the measurement of static and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring chain suitable for a wide range of applications, such as Industrial manufacture Manufacture of customized machinery Geological investigations Motor vehicle engineering Commercial agriculture Bridge building The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. The domed form, however, minimizes the effect of a force that is not exactly axial.

These models are among our most precise and yet mechanically robust miniature load cells. High accuracy, finely graded measuring ranges, small dimensions and the simple introduction of force via opposing threaded pins open up a wide scope of laboratory and production applications. Their sophisticated engineering with integrated support membranes and overload protection reduces additional design expense in many applications, e.g. for external overload protection or guiding the parts introducing force to the cell. The result is that less space is required, less material is used and less weight is involved. Last but not least, there is hardly any friction on components that could falsify the measurement result. The force to be measured is introduced centrally and axially to the cylindrical sensor body in the tension or compression direction by means of the two threaded pins. This requires the sensor to be mounted without any elements touching the end faces of the sensor housing.

Due to their small dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. This compression load cell is easy to handle and its installation is uncomplicated. Its small size makes it perfect for use in very restricted structures for both static and dynamic compression force measurements. The miniature compression load cell model 8415 is a flat cylindrical disc, the bottom of which is closed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. A strain gage full bridge is applied in the gauging member of the measuring element. This produces bridge output voltage directly proportional to the measured force. The small diameter of the sensors results in high rigidity and a short measurement range. The measuring force has to be applied centrically and free from lateral forces.

Due to their extremely compact design, these load cells can be used wherever static or dynamic load forces have to be measured in very tight spaces. Model 8416 is perfect for use in micro-technology and just as suitable for measuring tasks in the research and development sector. The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. The sensor element inside the body carries a strain gage full bridge which outputs voltage directly proportional to the measurement variable upon application of force. The short nominal measurement distance of the ultra-miniature compression load cells due to their design provides a high degree of rigidity. If needed, the nominal characteristic value can be standardized in the sensor connection cable.

The tension & compression load cells from the 8523 series are designed for a wide range of uses. The sensors feature many benefits, including three point-contact mounts for tilt-free installation. Thanks to this feature, excellent measurement results can be achieved even with a sub-optimum mounting surface. The force to be measured is applied to the central threaded hole in the tension or compression direction. For measuring purely compressive loads, using load buttons from our accessories range saves the need for complex sensor-integration mechanisms. Tensile loads in rods or chains can also be detected with ease using the optional pull plate. Inside the sensor is an elastic membrane, on which are applied strain gages connected in a full Wheatstone bridge. FEATURES Measuring ranges from 0 ... 20 N to 0 ... 5 kN Tilt-free installation thanks to point-contact mounts Excellent price/performance ratio Easy mounting burster TEDS optionally available

The 8524 precision tension & compression load cell is a versatile sensor for highly accurate load measurements in diverse applications. Optimum measurement quality is achieved with the load cell mounted on a flat, hard and polished contact surface. This requirement does not apply to small measurement ranges of up to 0 ... 2 kN because three knife-edge bearings ensure that the sensor is seated securely. Our brochure „Load Cells“ explains how you can design parasitic loads out of your mechanical system. Through-holes in the outer flange are used for fastening the 8524 sensor to the system structure. The load is applied via the central blind threaded hole or optionally via a load button. Alternatively, a pull plate and even rod end bearings, if desired, can be attached to the sensor for equally easy measurement of purely tensile loads, for instance in Bowden cables or chains. The 8524 sensor is designed to measure static, quasi-static and dynamic compressive and/or tensile loads.

The model 8527 high-precision compression load cell is the ideal load cell for reference measurement chains where highly precise measurement results are required. Its very high production quality and extremely low non-linearity of just 0.035 % F.S. make it a dependable choice for comparative measurements and calibration tasks. Designed for a dynamic stress of up to 100 % of the full scale value, the model 8527 load cell is also suitable for situations where a rapid signal change with high amplitude occurs and has to be measured. The model 8527 high-precision compression load cell has a domed load button on top, onto which the compressive load being measured is applied. Inside the load cell is an elastic membrane, on which strain gages generate a resistance change in the measuring bridge and an output signal proportional to the load. For the best possible measurement results, the force should be applied axially and centrically to the load button.

This radio control system allows you to remotely control accessories like infrared space heaters and lighting. The receivers are mounted on the mast, while the remote control unit can be conveniently carried in your pocket or on your key ring. With a range of up to 300m, you can easily control the heat and lighting with a push of a button.

The DFC locking electronics consisting of the Phase Frequency Detector (PFD) and FALC 110 provides high-end phase frequency locking for comb applications. The PFD RF input is designed for use with the RF output signal of the DFC MD. The error signal generated by the PFD is fed to the input of the FALC 110 regulator. The main output of the FALC is passed through the PFD to allow for remote switching of the fast feedback loop which modulates the laser diode current. A copy of the error signal (mon. out) is used to close the slow feedback loop acting on the DL pro piezo (Fine In) with the all-digital PID of the DLC pro. Slow and fast feedback loop can be enabled and disabled with a push of a button in the DFC user interface (TOPAS DFC).

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. This swing handle has a push button for rod or cam control and an IP-65 sealing system. For unblocking the handle, the push button is first unlocked with the round cylinder. Additional locking is possible with a padlock, and the swing handle protects against vandalism with its enclosed control function. Its application range includes both indoor and outdoor cabinets.

Black PC housing,insert and lock tongue,Head Diameter Ø30,Door Cutout: Ø25.5*22.5mm,Easy Installation,ROHS compliance

1970s inspired fixed-line push-button telephone with classic metal bell ringer The PushMeFon is a telephone in the classic shape if the 1970s. With its retro styling and modern colours it will easily attract the attention of friends and family, and because of the latest technology inside you can simply plug it in and use it. Have fun talking! Technical Specifications corded push-button phone modern colours version with classic metal bell (Sound sample) ring indicator light supports tone dialling Package includes Opis PushMeFon landline telephone telephone cable with interntional RJ11 plug telephone cable adapters for Germany, France, UK Dimensions length: 23 cm width: 22 cm height: 13 cm weight: 0.9 kg

Extensions for Button Die Holders

Button Die Holders for TRAUB A15-A25

Button Die Holders for TRAUB

Button Die Holders for Holders V200

Button Die Holders for Tap Holders STROHM and TORNOS

Button Die Holder for ER Tap Holders with Split Clamping

Button Die Hodlers for ER Tap Holders

Counter Nut for Button Die Holders

Button Die Holders for ER Tap Holders