Drains - Import export

Application in electro enclosures. Features: - Continuous ventilation and drainage of the enclosure - Pressure equalization between enclosure and outer atmosphere - Reduces condensation - Polyamide PA6 V-0 - Temperature range -40°C / +100°C - Protection grade max. IP65 Vertical installation at the lowest point of the enclosure bottom so that condensation water can drain off via the breather.

The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 3,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.

Compressed air preparation helps to prevent malfunctions on pneumatic components and increases their service life. Machine failures and downtimes are reduced. Whether compressed air preparation, regulation or cleaning, we have multi-part service units, from pressure regulators, filter controllers, oilers, condensate diverters and oil-water separators to system expansions and various accessories as well.

Description:The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

For low-viscosity OKS products in 25 l canisters Advantages and benefits Resistant to OKS products

The oil-free SILVER-LINE compressor OF-S90-25 is standardly equipped with a filter pressure regulator (manual condensate drain) and a 25 liter air tank.

Commercially available spigots made of the materials polyethylene or polypropylene cannot be used for solvents. The spigot StopCock PA is made of electrically conductive polyamide and therefore perfectly suitable for solvents. StopCock PA fits onto 3/4" outer threads and with the supplied adapter onto 3/4" inner threads and therefore onto nearly all commercially available canisters and barrels where the discharge thread is at the bottom. The StopCock discharge cocks fits all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers.

The draining rack is easy and flexible to set down on a table or working surface. Two large supports with wide bases ensure sufficient stability. Since both sides of the draining board can be used, it provides twice the hanging space. The collecting pan can simply be removed for emptying. The stable rods are individually placed into the holes of the draining rack and are clicked into place. Their positions can be changed at any time. Using a combination of rods of three different lengths (60 mm, 100 mm and extension to 150 mm), the draining rack can be adapted to any apparatus which is to be dried.

Drain tap for OKS products For low-viscosity OKS products in 5 l canisters Advantages and benefits Resistant to OKS products

IBC discharge valve with 90° hose nozzle and sealing cap. The hose can also be closed with the enclosed sealing cap. Hose nozzle external PA Ø 30 mm, suitable for flexible hoses. The IBC discharge valve is a sturdy, high-quality ball valve with a hose connection and connection adapter including seal, for standard thread S 60x6 external or 1" external, designed to fit all commonly used European IBC containers. With the appropriate thread, the discharge valve can also be screwed directly onto the original discharge valve that is already on the IBC tank if the original valve is leaking or faulty. In this way the IBC discharge valve ensures fast and reliable residual emptying of the container with good dosing. The discharge valve is an indispensable accessory to ensure a professional connection of the hose or for filling from your IBC container.

The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited. The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering. The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on. The Compact spigot fits all containers with G 3/4" connecting threads. PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis. The Compact spigot is the ideal addition to the compact jerrycans – for perfect storage and filling when space is at a premium!

The INOX drain cock in red/white, with the thread size DIN 45 is suitable for 5 L and 10 L canisters.

The INOX drain cock DIN 61 in red/black, with the thread size DIN 61 is suitable for 20 L, 25 L, 30 L and 60 L containers.

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

StopCock angled

Drained Lead-Acid Battery Scrap/Wholesale Acid Battery Scrap, Used Car Battery Scrap

natural/white with 3/4" internal thread and internal outlet tap Suitable for 20 / 30 / 60 L containers Color: white

Our corrugated tubes with integrated valves to reliably vent or drain duct systems. The advantages are obvious: Weight can be saved, the risk of leakage can be reduced and assembly times can be shortened. The inside diameter and the volume are designed according to the flow rate, and the opening and closing characteristics of the valve are designed according to the pressure range. Available materials/maximum operating temperature: PP 100°C PA6 120°C PA12 120°C Application automotive, agriculture and construction engines; for ventilation applications for air filters or fuel systems Our corrugated tubes with integrated connecting geometries (bayonet lock) are made to customers specifications to guarantee reliable connections and to ventilate or drain duct systems. This saves weight and reduces the risk of leakage. The snap-in geometry allows for time-saving and user-friendly assembly and disassembly. Of course we offer a wide range of accessories and nominal sizes.

Our highly flexible drain hoses are fully corrugated, expandable or fitted with integrated cuff sections to establish the best connections. They feature excellent chemical resistance and can be supplied fitted with standard connector adaptors. Available materials/maximum operating temperature: PP / -40°C - + 105°C other materials available upon request Application: sanitary applications (kitchen sink faucets, water trap, overflow pipe etc.)

The oil drain device Type C2 is used for oil sampling or emptying the transformer tank. The device is welded into the transformer case. The device is designed for use together with connection pipe F DIN 42551 for draining the transformer case for regeneration purpose of the oil. The oil drain device Type C2 is deisgned in accordance with EN 50216-4:2002 type C2.