Elbow - Import export

Elbow

Our range of elbows covers a broad spectrum of measurements, standards and materials for all forms of use in pipeline construction – up to and including those applications with the highest safety requirements. Unusual angles? Non-standardised radii? Limited tolerances? No problem for us – we develop the solutions together with you and customise them to your needs.

For 90° cable entries and safe outlets from switchgear cabinets PFLITSCH UNI elbow solutions enable cables to be taken safely around corners up to 90°. These cable glands have an angled cable gland body made from die-cast zinc or PA plastic. Elbow cable glands achieve the same technical values as the UNI Dicht® standard models. The variants with a rotating coupling can direct the component leg in any direction 360° around the attached leg in order to achieve the best cable entry. PFLITSCH makes these as standard products in sizes M16 to M40 and Pg 9 to Pg 36. To feed cables at an angle into/out of switchgear cabinets or machine housings, PFLITSCH produces various short and long flanged elbows in die-cast zinc and PA plastic. They are screwed tightly on to the housing and can accept – depending on the version – cable glands in sizes M16 to M63 and Pg 9 to Pg 48. An inserted o-ring securely seals the flange to the housing.

Stainless steel float valves, stainless steel autotankers or optionally with plastic housing are a reliable level and inflow regulation in any container or as an automatic drinker. The float valve is covered by the housing and thus protected.

Special aluminum adapter for bulkheads or body openings.

Elbow outlets for 90 ° bends 1.5 D Up to 2 “elbow outlets fit on elbows of all diameters mentioned in our data sheet (see download area). Larger branches are manufactured precisely for the respective arch diameter. Standards and special requests We deliver elbow outlets in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. If required, we can also supply special materials. Technical specifications More details, technical data and dimensions can be found in our data sheet "elbow outlets" in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.

Seamless tube elbows made of aluminum for welding.

As a standard, silicone hoses are made with polyester fabric. Reinforced fabrics such as aramid (NOMEX), Kevlar or fiberglass are also available as options. There are special Viton inserts for petrol and oil. All hoses are available by the meter, elbows and reducers. Custommade molded hoses can also be produced according to customer requirements.

Short description: For hose reels New generation of swivel joints for hose reels. Advantages: without losses in pressure and efficiency, optimized in terms of fluid mechanics, hence no extra load for sealing gaskets, extremely durable.

Elbows and connections made of steel and stainless steel for oil, gasoline and air hose lines. The connections are pressed onto the assembled hose.

Stainless steel pipes from HJS for individually adapted exhaust systems. Here you get angles, meter pieces to create an individual exhaust system or manifold.

Elbow Part Nr. 31

Elbow Part Nr. 31

Elbow Part Nr. 30

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie DP 1,2 bar DT 143° C ax. mov. +/-18 mm lat. mov. +/-23 mm

Elbow Part, in different angles Nr. 32

Elbow Part, in different angles Nr. 32 a

• The classic elbow pipe wrench • Serration against direction of rotation • Slim, S-shaped jaws • With 45° angled jaw • Three-point contact on tube, self-clamping • Infinitely variable • Red powder coated • Made of chrome vanadium steel, forged, oil-hardened

secutex impact protection with elbowdesign and inboard perforated plate are mounted when protection must also extend around the corner. The impact protection elbows can be manufactured to be isosceles as well as asymmetrical.

As reliable classic machines, the HM3xx series unites all the outstanding properties of a production crimper. Combining a convincingly solid construction with a high level of user friendliness, and long service life, the HM3xx set a new standard for quality and cost effectiveness. They are compact, powerful and make ergonomic working possible.

- R-thread - Whitworth pipe thread conical - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread with hexagon socket - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Metric thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar) - cooling water, air, vacuum - Stiff angular shape, can be locked with jam nut

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -20 to +120 °C - Working pressure range: -0.95 to 16 bar - cooling water, air, vacuum

- Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar)