Inks - Import export

Water based, pigment ink for DTF (direct to film) printing. ✔ Fine pigment dispersion ✔ OEKO-TEX certified ✔ Great prices ✔ Intense colors ✔ Low clogging ✔ Approved for EPSON i3200-A1 print heads Colors: CMYK+White, Spot colors, fluorescent colors Our DTF inks are tested and approved for DTF printing. With particles smaller than 0.3μm they can be used in a wide range of print heads. The unique formulation creates a perfect balance of color density and drying behavior. By this we make sure that your print heads stay open for as long as possible without sacrificing the opacity of your prints. With spot or fluorescent colors, you can run these inks in 2, 3 and 4 head printers to increase your color gamut or add special effects. The overall compatibility of these inks makes them a great and affordable partner for many adhesives powders and films.

Canon Ink Cart. PGI-520BK for iP3600/4600/MP540/620/630/980 black (2932B001)

Standard capacity 3000 pages, suitable for Hewlett Packard Pagewide Pro-Serie (552, 552 DW, 577, 577 DW, 577 Z, 452, 477, 477 DW, 452 DTW, 477 DWT, 452 DW), Pagewide-Serie (352, 352 DW, 377, 377 DW)

High Capacity, 1 x 22 ml / 500 pages, OEM 6431B001, PGI550XL, color: black - suitable for Canon Pixma IP-Serie (7250, 8750, 7220, 7240), IX-Serie 6850, Pixma MX-Serie (925,725), Canon Pixma MG-Serie (6350, 5450, 6350 S, 7150, 6450, 5550, 6650, 5650, 7550, 5655, 6420, 6400)

REA JET offers various ink and primer supplies - the right solution for every customer requirement. Always good to go - industry suitable ink and primer supply units — Highest chemical resistance — Best mixing performance for inks and primers — Avoidance of sedimentation — Greater range through higher filling capacity — Flushing function optionally available — Automatic or manual operation — Comprehensive accessories — Over 500 inks and primers

Standard Capacity Apfel, black, capacity, 1 x 11.2 ml / 385 pages - suitable for Epson Stylus SX-Serie ( 420 W, 425 W, 525 WD, 620 FW, 525 W, 445 W, 535 WD, 435 W, 235, 235 W, 230, 430 W, 440 W, 438 W), Stylus Office BX-Serie (305 FW Plus, 305 F, 305 F, 320 FW, 320 FW, 305 F, 305 FW, 320 FW, 525 WD, 625 FWD, 925 FWD, 535 WD, 635 FWD, 630, 306 FW +, 935 FWD, 630 FWD, 630 FW), Office B-Serie (42 WD), Workforce WF-Serie (7015, 7015 DW, 7515, 7525, 3520 DWF, 3530 Dtwf, 3010, 3010 DW, 3520, 3530, 3540, 3540 DTWF)

Original ink rolls in Meto quality are available for all Meto hand-labelers with standard ink (paper / indoor use) or with UV-resistant ink (plastic labels / outdoor labeling).

Laser segmented ink fountain blades

Increase consistency of ink flow within printer Precisely controlled ink delivery is critical for consistent ink flow within printers. Porex creates customized ink delivery wicks, vents and retention media that ensures the proper functionality in even the most complex printer systems. request sample ask an engineer

Deliver precise control of ink absorption and release As a global leader in inkjet printer media, Porex creates the materials with the highest capacities and ink release rates in customized shapes and sizes to meet your specific printer system’s needs. Our ink reservoir media can be offered in complex geometries and various gradient density configurations for precise control of ink absorption and release to: Deliver the highest release rate on the market – Customized HRM (High Release Media) materials release from 80% - 90% of your ink for maximum cost effectiveness and customer satisfaction. Absorb and deliver high ink capacity–Ink management components can be customized in various shapes and sizes based on your printer’s design needs. request sample ask an engineer

Online printing of variable data such as batch number, production date, etc. Suitable for installation on blister packaging machines. Can be equipped with different inkjet systems.

A prerequisite for the adhesion of an adhesive or coating to a surface is wetting. For wetting to take place, the surface energy of the substrate must be greater than that of the coating. In particular, very many plastics have a very small surface energy and are correspondingly difficult to bond. Often the aim of a plasma treatment is to make a surface wettable and bondable. The wettability can easily be tested with test inks. Diener electronic supplies a test ink set with 8 liquids with surface tensions between 30 and 73 (105) mN/m suitable for most practical applications. There is also a set of 23 test inks, with additional gradations between 30 and 73 (105) mN/m.

Heat transfer films for easy to peel heat transfers. ✔ High ink uptake ✔ Nice, matt finish ✔ Soft feel ✔ Great price ✔ Anti-static ✔ Thermally stabilized ✔ Hot or cold peel! Our instant-peel film for DTF (Direct to Film) printing is your best bet for a safe and easy process. It comes with many layers of coating which guarantee a great ink uptake and an easy release. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after pressing or to peel it cold. The anti-static feature of this film makes sure that no hot-melt powder particle sticks to the unprinted area, giving you a clean transfer result. Additionally, the film is matt on both sides so that the print won't stick to the film once rolled up and to make sure, that it can be processed perfectly in your DTF printer and transfer press.

Brother Toner TN-2420 for HL-L2310D/L2350DW/L2370DN/ L2375DW/DCP-L2510D/L2530DW/ L2550DN/MFC-L2710DN/L2710DW/ L2730DW/2750DW high capacity black

Capacity 40. 000 pages, black, suitable for Sharp MX series (2630, 2630 N, 3050 V, 3550 V, 4060 V, 6050 V, 5070 V, 3060 V, 6070 V, 3650, 3650 N, 2651, 3071, 3571, 4071, 6051, 3051, 3551, 4051, 5051, 6071, 3061, 3561, 4061, 5071, 3050, 3050 N, 3060, 3060 N, 3070, 3070 N, 3550, 3550 N, 3560, 3560 N, 3570, 3570 N, 4050, 4050 N, 4060, 4060 N, 4070, 4070 N, 5050, 5050 N, 5070, 5070 N, 6050, 6050 N, 6070, 6070 N)

AXRO - Your Partner for Office Supplies and Hardware. For more than 25 years we deliver to retailers original Lexmark supplies such as toner, ink, ribbons, drums, developer as well as service and maintenance kits. Your benefits at a glance: - Large brand and product portfolio - Top level of product availability - Expert knowledge about market requirements - Individual contact partner - Worldwide shipping Do not hesitate to contact us and get your offer today.

AXRO - Your Partner for Office Supplies and Hardware For more than 25 years we deliver to retailers original HP supplies such as toner, drums, ink, paper as well as service and maintenance kits. Your benefits at a glance: - Large brand and product portfolio - Top level of product availability - Expert knowledge about market requirements - Individual contact partner - Worldwide shipping Do not hesitate to contact us and get your offer today.

AXRO - Your Partner for Office Supplies and Hardware For more than 25 years we deliver to retailers original DELL supplies such as toner, ink as well as service and maintenance kits. Your benefits at a glance: - Large brand and product portfolio - Top level of product availability - Expert knowledge about market requirements - Individual contact partner - Worldwide shipping Do not hesitate to contact us and get your offer today.

AXRO - Your Partner for Office Supplies and Hardware For more than 25 years we deliver to retailers original Canon supplies such as toner, ink, drums, paper as well as service and maintenance kits. Your benefits at a glance: - Large brand and product portfolio - Top level of product availability - Expert knowledge about market requirements - Individual contact partner - Worldwide shipping Do not hesitate to contact us and get your offer today.

up to 22.5000 pages, suitable for Hewlett Packard Laserjet M-Serie (4555, 4555 F MFP, 4555 FSKM MFP, 4555 H MFP), Laserjet Enterprise-Serie(600 M 603 NH, 600 M 601 DNT, 600 M 601 NT, 600 M 602 N, 600 M 603 XH +, 600 M 603 DN +, 600 M 602 DN, 600 M 602 XY, 600 M 601 DN, 600 M 601 N, 600 M 602 DN, 600 M 602 N, 600 M 602 X, 600 M 603 DN, 600 M 603 N, 600 M 603 XH, 600 M 603 X, 600 M 601)

Colop e-mark Labelling Machine white (153111) Inkjet, 11.1 V Li-Ion, Up to 4 imprints can be saved

The demand for simple, economical and contact-free marking methods is growing continuously, particularly for sewing markings (clippings) in the textile manufacturing branch. The new Ink Marker Module – an extra option that can be retrofitted - is now available for our laser cutting systems.

The latest generation of REA JET GK 2.0 high-resolution coding and marking systems using piezo technology is suitable for direct, high-contrast coding and marking on absorbent and porous surfaces, such as wood, cardboard and paper, with a variable print height of up to 100 mm. Applications: — Porous and absorbent surfaces: paper, cardboard boxes, wood, textiles, fleeces, building materials, polystyrene, grinding wheels etc. — Variable print data such as date, time, counter, shift code or database content — Alphanumeric texts, barcodes, data matrix codes, logos, warning notes — Coding and marking of packaging — IPPC coding and marking on pallet blocks — EPAL coding and marking of pallets — CE marking on wood — Marking of paper sacks — All-round coding and marking of fiber drums — Marking of OSB panels with logo — Coding and marking of pallet boxes — Marking of gypsum boards or board stacks with large logos — Serialization and track & trace applications

We supply ID card printer ribbons for all leading card printer brands such as Evolis, HiTi, Zebra, Fargo, Magicard, Datacard, Authentys, Matica, Dascom, Nisca.

During printing and coating processes, so-called ink mist or particle mist arise in the outlet of doubleroll systems. This unwanted particle deposit results in lower product quality, high maintenance costs, increased ink consumption and the contamination of the environment. The formation of ink mist is very noticeable and annoying, particularly during coating and printing processes on substrates with non-absorbent surfaces (films, metalized substrates or composite films). A patented double-row DC plasma electrode is used to prevent this ink mist. This plasma electrode acts separately on both particle streams and ensures an optimal particle deposit. The electrode will be connected to the high voltage generator HSG61. The MISTING TACKER system is currently used for printing on metalized films and in silicone coating units (Wifag-Polytype).

TAMPOPRINT offers a wide range of ink/doctoring cups for "hermetic" standard pad printing machines. Available are sizes with diameters of 30/40/60/90/130/140/150/210 mm in plastic, aluminum or steel with ceramic or carbide doctoring ring. Multi-color ink/doctoring cups, pressure rings and pressure ring adapters are also available. The ink/doctoring cup is used in the "hermetic" pad printing process to transfer the printing ink to the cliché in a single operation and simultaneously remove the ink (doctoring).

For pad printing process screen printing inks (CMYK) as well as opaque pad printing inks in various ink shades are used. Today, the comprehensive range of pad printing inks enables the customer to choose a pad printing ink type exactly tailored to his requirements. The range of products includes a variety of color types and shades. Also, specially desired shades can be produced in the in-house color laboratory. TAMPOPRINT pad printing inks comply with the REACH Directive (EG) No. 1907/2006 and the RoHS Directive 2011/65/EU.

TAMPOPRINT offers a comprehensive range of tampon printing accessories. From accessories for tampon printing machines such as printing pads and ink/doctoring pots to practical devices for everyday tampon printing. True to the motto "Everything from a single source".

The SEALED INK CUP 90 Q is a single-color pad printing machine for the realization of oblong print images that are larger than the ink/doctoring cup used. Designed as an entry-level model, this machine offers a good basis for a variety of applications. As basic equipment this pad printing machine contains a base frame with practical storage space. This also ensures a stable stand and leads to high stability. Flexibility is provided by the height-adjustable angle table, which allows quick changeover to components of different sizes. With the user-friendly touch panel many machine parameters and functions can be controlled and set on the display.