Interface - Import export

Intelligent and seamless interfacing to the outside world is the key to success for many intercom applications. Riedel offers diverse interface solutions for the seamless integration of radios, telephones, ISDN, digital as well as analog party-lines, audio routers or Audio-over-IP.

The probe's measurement data can be sent to a PLC via Ethernet, EtherNet/IP, PROFINET or EtherCAT fieldbus Fieldbus compatible interface module: MG80-NE (Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET) / MG80-EC (EtherCAT) Up to 16 MG80-CM counter modules for measuring probes can be connected to each main module. Up to 64 MG80-CM or touch probes can be connected to MG80-NE via max. 3 LINK connections Up to 255 MG80-CM or measuring probes can be connected to MG80-EI/PN via LINK connections. Theoretically, up to 65,535 MG80-CM or mestasters can be connected to MG80-EC via LINK connections. MG80-CM Counter module for connection of one DK or DT series probe (with MT13) Easy installation on DIN mounting rail LZ80-K1/K2 I/O module for MG80-EI, MG80-PN and MG80-EC Equipped with 8 inputs and 8 outputs

High-resolution encoder MSA213C for drive technology The requirements for sensors used for position detection in automation and drive technology increase with the complexity and performance of the associated machines and systems. A new MSA213C high-resolution absolute sensor from SIKO is a perfect solution. It not only supplies the absolute position at any time without referencing and without requiring a backup battery, but thanks to its small design and many different interfaces, it can also be integrated into the system and control environment with very little effort.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or use related wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24 month warranty* on the complete ABB handheld control panel.

KUKA repair, exchange & replacement for pendants, motors and ROBOT We offer general overhaul repairs, as well as exchange and replacement parts for KCP1, KCP2 and KCP4 pendants, motors and other parts manufactured by KUKA. For each repair and every KUKA pendant that is exchanged or purchased as a replacement part from BVS, we not only replace all components that are electronically and mechanically defective as part of the product reconditioning, but also replace all of the parts that are subject to ageing or use related wear. What's more, we only use original components approved by the manufacturer or legislator to repair your KUKA pendants. We are also able to restore the full functionality of the 6D mouse. Thanks to the excellent availability of replacement products in our extensive warehouse comprising over 100,000 assemblies and the option of express repair services, you will receive your KUKA pendant as quickly as possible.

KUKA repair, exchange & replacement for pendants, motors and ROBOT We offer general overhaul repairs, as well as exchange and replacement parts for KCP1, KCP2 and KCP4 pendants, motors and other parts manufactured by KUKA. For each repair and every KUKA pendant that is exchanged or purchased as a replacement part from BVS, we not only replace all components that are electronically and mechanically defective as part of the product reconditioning, but also replace all of the parts that are subject to ageing or use related wear. What's more, we only use original components approved by the manufacturer or legislator to repair your KUKA pendants. We are also able to restore the full functionality of the 6D mouse. Thanks to the excellent availability of replacement products in our extensive warehouse comprising over 100,000 assemblies and the option of express repair services, you will receive your KUKA pendant as quickly as possible.

In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB sensor interface can satisfy this requirement admirably, thanks to its „plug & measure“ design. The USB connection means installation could not be simpler. Typical applications: —Mobile test measurements via laptop —Laboratory test set-ups —Instrumentation and control —Diagnostic measurements in the chemical industry —PC-based recording of expansion figures in bio engineering The USB sensor interface takes its supply from the connected PC via the USB port, and uses it to generate the power supply for the sensors. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.

Intelligent and seamless interfacing to the outside world is the key to success for many intercom applications. Riedel offers diverse interface solutions for the seamless integration of radios, telephones, ISDN, digital as well as analog party-lines, audio routers or Audio-over-IP.

Intelligent and seamless interfacing to the outside world is the key to success in many intercom applications. The Artist platform is an open world of communications. Dedicated interface solutions let you communicate with telephones, digital and analog partylines, camera intercoms, 2-way radios and other analog and digital systems.

Intelligent and seamless interfacing to the outside world is the key to success in many intercom applications. The Artist platform is an open world of communications. Dedicated interface solutions let you communicate with telephones, digital and analog partylines, camera intercoms, 2-way radios and other analog and digital systems.

Intelligent and seamless interfacing to the outside world is the key to success in many intercom applications. The Artist platform is an open world of communications. Dedicated interface solutions let you communicate with telephones, digital and analog partylines, camera intercoms, 2-way radios and other analog and digital systems.

The IMX12-CCM (Cabinet Condition Monitoring) can be installed in virtually any cabinet or any protective enclosure to ontinuously check the current protection degree there - even retrospectively. The DIN rail device notifies with a switching signal improperly closed doors, as well as exceedances of temperature and interior humidity, to the control system.

We offer the matching accessories for quick mounting, simple parameterization and safe protection of interface modules. From cage clamps, programming adapters and power buses up to the IP67 rated housings: Each item is perfectly tailored to the interface module series IM, IME and IMC, making installation and commissioning of your application easy.

Our wireless SureCross system enables simple and fast transmission of process data from the field to higher level control systems. In both versions, DX70 for simple cable replacement as well as in DX80 for a complex network, gateways communicate through radio signals with the nodes in the field and transfer the signals of the field devices to the controller.

We offer the appropriate interface device for separating, forming, processing, converting and conditioning analog signals. The product portfolio comprises analog signal isolators, isolating transducers, temperature measuring amplifiers, potentiometer amplifiers, trip amplifiers and level monitors - for simple and complex requirements, for Ex- and non-Ex applications, available in the IP20 housing for DIN rail as well as in the compact IP67 housing for decentralized on-site remote control.

Everywhere, where digital signals must be electrically separated and processed or current and voltage limited power supply is needed, our interface devices are used such as isolating switching amplifiers, solenoid drivers, relay couplers and rotation speed monitors. The interface devices are available in the IP20 modular housing for DIN rail as well as in the compact IP67 housing for decentralized remote-site use. The product portfolio also comprises solutions for the Ex area and SIL-certified devices.

The BL ident® interfaces are obtainable as a set together with the gateway and one to four RFID modules in IP20 or IP67. Also available are interfaces for connection to PROFIBUS-DP, EtherNet/IP™, Modbus TCP, DeviceNet™, PROFINET, CANopen und EtherCAT®. A maximum of 16 parallel operating channels are possible. Programmable gateways enable distributed and fast signal processing. Alternatively, the BL compact series offers customized interfaces in the form of compact, fully potted IP67 components.

Riedel puts the world on the air over Skype. Riedel’s STX-200 broadcast-grade professional Skype interface brings any Skype user worldwide into professional broadcast workflows. The reliable, 1 RU, single-box solution allows broadcasters to engage with both reporters and viewers in live programming. The Skype TX Control software provides customers with the ability to manage multiple Skype TX channels from a single user interface. Other parameters that the software manages include stream resolution, aspect ratios, FPS, logo overlays, and various audio options. Riedel’s STX-200 also offers unique device monitoring functions, such as temperature measurement and system status, that can be monitored by means of Simple Network Management Protocol (SNMP). Licensed by Microsoft, the STX-200 offers broadcast-quality HD- SDI and balanced XLR audio I/Os. Previously, users relied on consumer PCs running common Skype clients that then needed to be integrated with scan and HDMI-to-SDI...

RetailConnect - the universal tool for data conversion from any source. Irrespective of device and version the integrated communication driver ensures smooth transmission. Flexible, robust and unique as regards the integration. RetailConnect allows communication between host systems and terminal equipment. Bidirectional transfer of master data and transactions (recordings and sales) is possible via RetailConnect. Transfers can be started time-controlled or via trigger file. RetailConnect is run capable as a service or manually as command line program.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual iinear or slider adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Electronic position indicator with plug connection for magnetic sensor. Integrated Industrial-Ethernet-Fieldbus. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Display accuracy up to 0.01 mm. Absolute function via internal backup. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. IP53 type of protection, IP65 as an option.

This USB interface PCB enables you to connect easily the infrared temperature measuring device of the DM301 series to the PC.

The sliding gate control valve Type 8020 in reinforced GS3 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications this valve is the clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

The sliding gate control valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications this valve is the clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

LT80 multifunction display with interface modules and clearly structured user interface Connection of up to 32 DK or DT probes (DT probes with MT adapter) Easy installation on DIN mounting rail High speed trigger module When connecting an encoder with TTL output pulses to the trigger module, measured values from up to 16 probes can be read out synchronously in dynamic applications The synchronous measurement data can be stored on the LT80 between LT80-NE Display 7-inch touchscreen LCD display for 2 to 16 measurement channels Different measurement modes and measurement functions selectable: Current value, MAX, MIN, P-P, ADD/SUB function, 2 or 4 step comparator function for automated measuring and sorting Display I/O status 3 different interfaces (USB stick, SD card, LAN) for data storage, data transfer and parameterization Different menu languages selectable (English, German, Japanese)

The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system is ready for use without any on-site calibration. Due to its very good temperature stability, immunity to magnetic fields and robust design that is protected to IP68, the capaNCDT DT61x0/IP is used for industrial measurement tasks such as air gap measurement in generators and regulation of plant and machinery.

The MDS-40-LP sensors are specially designed for large volume production from 2,000 pieces or more. As these sensors are reduced to pure measurement technology, the creation of cost-effective PCB sensors was possible. Their flat design and flexible arrangement of the magnets allows easy integration in restricted spaces. Measured values are output via a rectangular signal, which is easily evaluated via, for example, digital inputs from micro-controllers.