Digital processing - Import export

The digital load cells in the Pendeo® Process series from Minebea Intec are specially designed for silo and process vessel weighing. They are based on the tried-and-tested pendulum support principle, which in combination with Minebea Intec installation kits allows for the horizontal expansion or contraction of the vessel without damaging the load cells. This minimises the influences on the measurement signal.

Model 9180 supports force, pressure and torque sensors operating on the strain gauge principle, as well as the connection of position and angle sensors in potentiometer or DC/DC configuration. It also allows the measurement of process signals ± 1 V/ 5 V/ 10 V or 0 ...1 mA, 0(4) ... 20 mA. The current measured value is indicated on the 14 mm high LED main display, while a second display located directly below provides a reading of the peak value. The display is particularly suitable for highly accurate measurements due to the high accuracy of 0.1%. It is also possible to monitor up to 4 limit values and provide the results via relay or transistor outputs. Thus the process value display can be used for classification, process and control tasks. The current measured value is frozen on the display by activating an external HOLD signal. The TARE function is useful for balancing out previous loads for example.

metal separator was developed for the examination of plastic granulates, ground material and powders for metallic foreign bodies. It is used in the injection molding and extrusion areas for slow-flowing material columns. Both the detector and the ejection unit have been specially developed for this area of use. This results in top performance data for precision, operating reliability and ease of cleaning. Failsafe storage of all system parameters Digital signal processing for best detection Process- and condition monitoring Standardised system for a wide area of use Robust construction for maximum lifetime Highest precision in long-term operation Fast ejector for minimized material loss Dismantle without tools All components are easily accessible

Gain digital control over your processes with BRAIN2 Dashboard. Simple, clearly structured and flexible. Use the app to create your individual management cockpit. Benefit form intuitive live monitoring. Whenever and wherever you like. BRAIN2 Dashboard offers you best possible transparency about your production. The app visualizes real-time data of your devices or systems on the screen. Clearly arranged, explicit and thematic. The app functions can be selected and operated intuitively.

Single color, two color and fiber optic models Temperature range: 50 to 3200 °C (122 to 5792 °F) Superior optical resolution to 300:1 Spot sizes down to 0.6mm (0.02 inch) Fast response times down to 2 ms Easy adjustment with manual variable focus integrated head optics Through-the-lens sighting, with optional laser, LED or video aiming function Compact, rugged housings with IP65 (NEMA-4) rating Ethernet, Profinet and EtherNet/IP options Programmable relay output for control Simultaneous analog and digital outputsThe Fluke Process Instruments Endurance® series has been designed to meet the requirements of modern industry that allows you to integrate with all major control systems quickly, easily and seamlessly. The series are available in single color, two color and fiber optic Endurance models. The innovative Endurance® Series of low-temperature and high-temperature two color pyrometers meets all requirements of modern industry: it is flexible and easy-to-install; durable to withstand

The cable transmitter µCAN.1.ti-TRS is designed for the acquisition of one temperature signal and its digitization for being processed via CAN bus. The TRS module is integrated directly in the measurement line at a short distance from the source to avoid interference effectively.Temperature Thermo type J, K, L Temperature Pt100, Pt1000 (2-wire) Accuracy ± 0.5 K (Thermo) Accuracy ± 0.2 K (Pt100) Resolution 16-bit (0.1 °C) Sampling rate up to 1 kHz Sensor error detection Equipped with cold-junction compensation Fieldbus CAN classic / CAN FD Protocol CANopen / CANopen FD / J1939

The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface.

The battery-powered BAROLI 02P enables a local displaying of values in applications, where high requirements on hygienic process connections and easy cleaning or sterilisability are requested. The filling medium is food compatible oil with FDA approval. The display housing is rotatable, thus ensuring an easy reading even under unfavorable mounting conditions. Additional functions: switching the unit, displaying min / max values, calibrating the offset and the end point, configuring the automatic switching-off. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.125 % FSO BFSL (class 0.1) — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment add. display — hygienic process connections, EHEDG — flush welded stainless steel diaphragm Optional: — min/max function with reset function — offset and end point calibration — setting the pressure unit — configuration of switch-off automatic

The BAROLI 05P enables a local displaying of values in applications, where high requirements on hygienic process connections and easy cleaning or sterilisability are requested. The filling medium is food compatible oil with FDA approval. The display housing is rotatable, thus ensuring an easy reading even under unfavorable mounting conditions. Additional functions as changing unit, displaying min / max values, calibrating of offset and span, as well as configuring the automatic switching-off complete the profile. Features: — nominal pressure: 0 ... 60 bar up to 0 ... 400 bar — accuracy: 0.25 % FSO BFSL (class 0.2) — flush welded stainless steel diaphragm — rotatable housing — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment additional display — suited for viscous and pasty media Optional Features: — min / max function with reset function — offset and end point calibration

The compact low-cost digital pressure gauge DM 10 is battery-powered and has an adjustable housing; it is thus extremely suitable for mobile pressure monitoring. The 4.5-digit LC-display indicates the battery status, the mea-surement value as well as the unit, this enables a fast and precise reading. It is possible to switch between the most common units (bar, psi, Pa, MPa). Additional functions as auto-zero, min / max values and an automatic switching-off complete the DM 10 profile. Features: — nominal pressure: 0 ... 1.6 bar up to 0 ... 250 bar — accuracy: 0.5 % FSO BFSL (class 0.5) — ceramic diaphragm — adjustable housing — LC display, 4.5-digit 7-segment display — standard battery CR 2450 operating period > 1.800h Optional Features: — min / max function with reset function — auto-zero — setting the pressure unit — automatic switch-off cofiguration

The digital pressure gauge DL01 is a precision device fulfilling highest demands. It was conceived especially for leak testing or pipeline monitoring. The advantage of the DL01 is that it consists of two devices - the digital display and the pressure transmitter -which can be combined without any tools. Outstanding measuring qualities, an intuitive operation, as well as an integrated data logger characterize the DL01. In addition, the graphic display provides the handling and the clear presentation of the measuring procedure. Features: — nominal pressure: 0 …100 mbar up to 0 ... 400 bar — modular sensor concept — data logger — graphics-capable display — stainless steel housing d = 100 mm — communication interface USB 2.0 Optional Features: — data logger interval 1s ... 99 days or fixed time — default values for time / test duration — zero point calibration

Optimise your production process by automating the supply of your laser system. With our flexibly configurable and scalable robot systems, your jobs will be done quickly and accurately. Fully automated process operation The table already loaded with the new material will be released through a digital signal. Once the working process on the second table is completed, the change will start fully automatically. The new material is cut automatically while the robot will unload the finished work pieces, parallel to the cutting process and without downtimes.

Thermalert 4.0 infrared temperature sensors provide accurate temperature measurement from -40 °C to 2250 °C (-40 °F to 4082 °F) for a wide variety of process control applications. • Durable stainless steel IP65 / NEMA4 enclosures designed to withstand ambient temperatures from -20 °C to 85 °C (-4 °F to 185 °F) • Integrated laser sighting • Galvanically insulated outputs • Plastic lens option for food applications • Analog input for ambient compensation and adjusting emissivity setting • Multiple interfaces – 2-wire loop powered for analog and digital communication – 12 wires M16 and 6-pins terminal block for digital communication (RS485) • USB for easy setup • Simple, two-wire or digital installation • Advanced signal processing • Wide choice of focus distances • 2-year guarantee The program includes various models and accessories. The DataTemp® Multidrop software enables easy configuration and process monitoring on a real-time graphical display.

Whether made by a robot or by human hand, wherever things are produced or joined together, you need professional skills, concentration – and above all, good lighting conditions. LINURA.edge delivers powerful, homogeneous white light to monitor processes without specific spectral requirements, for example in assembly systems. Perfect illumination for perfect results. - White light (5 000 K / Ra > 80) to illuminate different production processes - Digital input for powerless switching - ADVANCED package for gradual dimming, automatic dimming when temperature limits are exceeded (at Ta > 50 ° C), and for connecting an RGB luminaire (variants) - Through-wiring for electrical interlinking of several luminaires (variants)

Transport and drive rollers must provide precise transport of the print media in the digital printing process. This is especially true for wide format inkjet printers. Tracking lines, artifacts on the printout, or paper feeding failures are not accepted by the end-user. Our transport rollers are subject to the highest quality standards in respect to: Perfect, defect-free surfaces Precisely defined surface roughness High friction stability over life Tight tolerances in all dimensions

FEATURES & BENEFITS • Direct reading of dew point with calculated % carbon • Direct reading digital display of process dew point • Designed for use in heat-treat applications • Equilibrium %C computed with entered process temperature. Feature provides cross check for oxygen probe systems • CQI 9 compliant furnace atmosphere measurement • No interpretation errors • Short response times, even when moving between a high and low dew point process • Easy-to-use, simple operation, operator training in minutes • Rugged capacitive sensor • Long life rechargeable battery • NIST traceable calibration • Calibration certificate supplied with factory calibration

IntelliLock protects your wind turbine and simplifies wind farm management based on smart, digitalized processes. Today, wind turbines are insufficiently protected against unauthorized access.Gaining full control over turbine access is hard, as transparency on the master keys handed out by tur-bine manufacturers is limited. However, asset safety and security are crucial for operators as they are the ones who are liable. Also, today’s access control processes show room for improvement with regard to efficiency and cost. That is why we are developing IntelliLock. TECHNICAL FACTS ■ For all standard or tubular frame doors ■ Keyless but can be combined with locking cylinder as backup ■ Vandal-proof equipment for tough environments ■ IT security by design against cyber risks ■ Easy software integration via REST API

With our digital printing process we can print not only paper but also foils made of different materials (also self-adhesive). We can print consecutive numbers, even with different types of barcodes, and any shape can be cut. Laminated with laminate, the prints are protected for a long time against UV radiation and weather influences, even outdoors. Coated with synthetic resin, they receive the high quality and look of the doming signs. product label advertising stickers Club Sticker club sticker Business Labels Information Labels Logo sticker warning label

With the newly developed XELLAR profiling system, PROFILMETALL combines for the first time all requirements for smart profiling in one system: Whether roll forming, punching or weld Features and benefits Intelligent digital process communication for sensor monitoring, electronic tool adjustments ... Free choice of drive concepts, tailored to the product Customized system concepts and modules Individual equipment - integrated in the machine frame, e.g. B. coolant pan, roll forming tool storage compartment, drawer, controls Closed production system for more safety and noise reduction Coolant splash protection through protective hood Integrated oil mist extraction Resource-saving housing design enables the housing modules to be reused inexpensively when changing products Machine-integrated transport device for quick spatial relocation Simplification of the change of roll forming tools through a new machine design

The IdentPro Warehouse Execution System increases inventory visibility and productivity in the traditional warehouse with lift trucks to an unmatched level. The AI-based software, complemented by LIDAR and IoT sensor technology, takes the burden off forklift drivers to scan barcodes or remember storage locations. All goods movement are automatically tracked. A real time 3D image of your warehouse is permanently synchronized with your management systems such as WMS and ERP. All transport orders are processed fully digital and are monitored for correct execution. Your lift truck drivers only do what they do best: moving goods. You benefit from a productivity increase of up to 25%. Learn more on www.identpro.de/en

Our sustainable flatbottom pouches are suitable for almost every filling good, but particularly apt for coffee. They have laboratorytested barrier properties against oxygen, humidity and UV light and come with an aroma valve. With our outstanding aroma preservation (e.g. material Martha 0,0419,97 cm3/m2*24h*bar) your products stay fresh for a long time. The materials used are made out of recyclable mono plastic or sustainable paper. Due to small runs starting at 500 pieces, every product variation, taste and type gets their own design. Special editions are no problem either and quickly realized due to digital processes and fast delivery. Our pouches are fully printed – save time by not sticking labels and win space for your branding and product information. Design effects such as metallic shininess can be realized easily and without additional cost.

Our sustainable standup pouches are suitable for almost every filling good from food and supplements to fashion. They have laboratorytested barrier properties against oxygen, humidity and UV light. With our outstanding aroma preservation (e.g. material Martha 0,0419,97 cm3/m2*24h*bar) your products stay fresh for a long time. The materials used are made out of recyclable mono plastic or sustainable paper. Due to small runs starting at 500 pieces, every product variation, taste and type gets their own design. Sizes are available from XXS to XXL to cater every need. Special editions are no problem and quickly realized due to digital processes and fast delivery. Our pouches are fully printed and provide you with all the space you need for branding and product information. Design effects such as transparency or metallic spaces can be realized easily and without additional cost.

Our sustainable and standup and flatbottom pouches are made out of recyclable mono plastic and suitable for almost every filling good from coffee to supplements and fashion. They have laboratorytested barrier properties against oxygen, humidity and UV light. With our outstanding aroma preservation (e.g. material Martha 0,0419,97 cm3/m2*24h*bar) your products stay fresh for a long time. Due to small runs starting at 500 pieces, every product variation, taste and type gets their own design. Sizes are available from XXS to XXL to cater every need. Special editions are no problem and quickly realized due to digital processes and fast delivery. Our pouches are fully printed and provide you with all the space you need for branding and product information. Design effects such as transparency or metallic spaces can be realized easily and without additional cost.

Our sustainable standup and flatbottom pouches are suitable for almost every filling good and make your product stand out on the shelf. They have laboratorytested barrier properties against oxygen, humidity and UV light and keep your products fresh for a long time. Due to small runs starting at 500 pieces, every product variation, taste and type can get their own specific pouch design. Our sizes cater almost every need, ranging from S to XL. Special editions are no problem and quickly realized due to digital processes and fast delivery. Our pouches are fully printed and provide you with all the space you need for branding and product information. Our pouches are made out of sustainable paper, produced in the European Union and will be delivered within 36 weeks.

Our sustainable standup and flatbottom pouches are perfectly suited for packaging spices and seasonings. They have laboratorytested barrier properties against oxygen, humidity and UV light. With our outstanding aroma preservation (e.g. material Martha 0,0419,97 cm3/m2*24h*bar) your spices and seasonings stay fresh for a long time. Due to small runs starting at 500 pieces, every sort gets their own pouch design. Special/Limited editions or trial packs for new products are no problem either and quickly realized due to digital processes and fast delivery. Our pouches are fully printed and provide you with all the space you need for branding and product information. Design effects such as transparency or metallic spaces can be realized easily and without additional cost. The materials used are made out of recyclable mono plastic or sustainable paper.

Our sustainable standup and flatbottom pouches are perfectly suited for packaging tea. They have laboratorytested barrier properties against oxygen, humidity and UV light. With our outstanding aroma preservation (e.g. material Martha 0,0419,97 cm3/m2*24h*bar) your tea stay fresh for a long time. Due to small runs starting at 500 pieces, every sort gets their own pouch design. Special and limited editions are no problem either and quickly realized due to digital processes and fast delivery. Our pouches are fully printed and provide you with all the space you need for branding and product information. Design effects such as transparency or metallic spaces can be realized easily and without additional cost. The materials used are made out of recyclable mono plastic or sustainable paper.

Our sustainable pouches are a great solution for packaging small fashion items and accessories such as socks, underwear and jewelry. Due to small runs starting at 500 pieces, you can create different designs for every type and size. Varying editions as well as special or limited editions are no problem and quickly realized due to digital processes and fast delivery. Our pouches are fully printed and provide you with all the space you need for branding and product information. Specific design effects such as transparency or metallic spaces can be realized easily and without additional cost. With our digital platform, digital solutions and a fast delivery, you can realise your project in a couple of weeks instead of months. All of our materials are made out of recyclable mono plastic or sustainable paper. Laboratorytested barrier properties protect your products perfectly against dust, dirt and moisture.

Our sustainable standup and flatbottom pouches are suitable for almost every filling good from body scrubs to face powders. They have excellent laboratorytested barrier properties against oxygen, humidity and UV light – thus, they have amazing protection against moisture and heat and serve as a protective shield against oxidations. The materials used are made out of recyclable mono plastic or sustainable paper. Due to small runs starting at 500 pieces, not only every beauty product gets their own design, but every scent, size and type as well. Special and limited editions are no problem and quickly realized due to digital processes and fast delivery. Our pouches are fully printed and provide you with all the space you need for branding and product information. Design effects such as transparency or metallic spaces can be realized easily and without additional cost.

Our sustainable standup and flatbottom pouches are perfectly suited for packaging bird food. The materials used are made out of recyclable mono plastic or sustainable paper. They have laboratorytested barrier properties against oxygen, humidity and UV light. With our outstanding aroma preservation (e.g. material Martha 0,0419,97 cm3/m2*24h*bar) your bird food products stay fresh for a long time. Due to small runs starting at 500 pieces per design you can create a particular pouch design for every taste and type. Limited editions or product tests are no problem either and quickly realized due to digital processes and fast delivery. Our pouches are fullyprinted and provide all the space you need for branding and product information. Design effects such as transparency or metallic spaces can be realized easily and without additional cost.