Electric motors and parts - Import export

Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel drylin® E data sheet - Gearbox for stepper motors GEA-60-..._EN.pdf Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

For driving the FLUX pump a wide range of electrical to pneumatic motors is available. Even if you work in hazardous areas or with flammable liquids. Depending on the application, different pumps can be driven by different motors. Thus, the output of a drum pump depends, among other things, on the power of the motor. Here you will find the most economical and safest drive solution for your application. Battery motor: FBM-B 3100 Commutator motors: FEM 3070 FEM 4070 F 457 F 458 F 460 Ex Compressed-air motors: F 416 Ex FPM

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 315 bar DN 32 (1 1/4") DN 40 (1 1/2") 350 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") Stainless steel 100 bar DN 32 (1 1/4") DN 40 (1 1/2") 160 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") PRESSURE MAXIMUM Steel 42CrMo4 315 bar DN 32 (1 1/4") DN 40 (1 1/2") 350 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") Stainless steel 100 bar DN 32 (1 1/4") DN 40 (1 1/2") 160 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed short length SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") DN 350 DN 400 DN 500 DN 600 DN 700 DN 800

brass or stainless steel Vitonseal (FEP optional) builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed for simple applications for example hose reels PRESSURE MAXIMUM PRESSURE MAXIMUM 16 bar Stainless steel Brass PRESSURE MAXIMUM 16 bar Stainless steel Brass

stell (zinc plated) NBRseal Ball bearing version swiveling, rotating movements with low speed for simple applications for example hose reels PRESSURE MAXIMUM 80 bar DN 32 (1 1/4") DN 40 (1 1/2") 100 bar DN 25 (1") 150 bar DN 20 (3/4") 200 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding track similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM 40 bar Stainless steel 100 bar Steel 42CrMo4 SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 16 bar DN 350 DN 400 DN 500 DN 600 DN 700 40 bar DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") Stainless steel 6 bar DN 350 DN 400 DN 500 DN 600 DN 700 16 bar DN 125 (5") DN 200 (8") DN 250 (10") DN 300 (12") SIZEDN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") DN 350 DN 400 DN 500 DN 600 DN 700

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 100 bar DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") 250 bar DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") 350 bar DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") Stainless steel 40 bar DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") 100 bar DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding track similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM 40 bar Stainless steel 100 bar Steel 42CrMo4 SIZEDN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

universal useclamping/release elastomer seal lightweight construction small size PRESSURE MAXIMUM 9,0 bar air vacuum TEMPERATURE MAXIMUM 90 °C air

segment design low weight self supportingno additional support necessary sealing PFTECompound good sliding properties low stickslip effect PRESSURE MAXIMUM 9,0 bar air vacuum TEMPERATURE MAXIMUM 90 °C air

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 80 1/min 50 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar

universal use ballbearings (can be relubricated) robust and less influence of dirty media self supporting in innovative lightweightdesignno additional support necessary housing aluminium or brass rotor stainless steel

ballbearings (can be relubricated) robust and less influence of dirty media self supportingno additional support necessary housing stainless steel rotor stainless steel PRESSURE MAXIMUM water 40 bar DN 50 (2") 50 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") TEMPERATURE MAXIMUM 130 °C water SPEED MAXIMUM 750 1/min DN 50 (2") 2500 1/min DN 32 (1 1/4") DN 40 (1 1/2") 3000 1/min DN 25 (1") 3500 1/min DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2")

single inlet/outlet line rotor + housing, material stainless steel tungsten carbide/tungsten carbide seal 160,0 bar hydraulic oil water TEMPERATURE MAXIMUM 90 °C hydraulic oil water SPEED MAXIMUM 1500 1/min DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2")

universal use ballbearings (can be relubricated) robust and less influence of dirty media self supportingno additional support necessary housing aluminium, brass or stainless steel rotor stainless steel PRESSURE MAXIMUM vacuum 0 bar DN 6 (1/8") DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") air 10 bar DN 6 (1/8") DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") hydraulic oil 40 bar DN 50 (2") 50 bar DN 6 (1/8") DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") TEMPERATURE MAXIMUM 120 °C air hydraulic oil vacuum SPEED MAXIMUM 750 1/min DN 50 (2") 2500 1/min DN 32 (1 1/4") DN 40 (1 1/2") 3000 1/min DN 25 (1") 3500 1/min DN 6 (1/8") DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") SIZEDN 6 (1/8") DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2")

single inlet line aluminium housing silicon carbide seal dry running (7600T) PRESSURE MAXIMUM 100,0 bar coolant TEMPERATURE MAXIMUM 90 °C coolant SPEED MAXIMUM 24000 1/min SIZEDN 8 (1/4") DN 10 (3/8")

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe brass (rotor stainless steel) small diameter ceramic seal CDCartridgeDesign PRESSURE MAXIMUM 10,0 bar water TEMPERATURE MAXIMUM 90 °C water SPEED MAXIMUM 1000 1/min NPT thread 3500 1/min ISO 228 thread SIZEDN 10 (3/8") DN 15 (1/2") DN 20 (3/4")

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe universal usecooling, heating, clamping series with ball bearings, graphite bushbearing or solid grease ballbearings bellows sealing available in stainless steel CDCartridgeDesign PRESSURE MAXIMUM 6,0 bar heat transfer oil 10,0 bar air nontoxic gases steam 17,0 bar water TEMPERATURE MAXIMUM 300 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 600 1/min DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 80 (3") DN 100 (4") DN 125 (5")