Fillers - Import export

Filling compound such as epoxy resin filler (“epoxy putty”), fine filler or repair putty are used for corrosion protection, repairing scratches and unevenness in metal, wood and fibreglass-reinforced plastics. These coatings are mainly used in boat building.

Aluminium and mineral fillers

Systec Mediafill, filling device for dosing and filling of microbiological culture media in Petri-Dishes with a diameter of 35mm, 60mm and 90mm for up to 220, 440 and 660 Petri-Dishes as well as for Bi-Plates, Tri-Plates and for dosing and filling of liquid media into test-tubes. www.systec-lab.com

Universal tank caps and threaded flanges.

Optigrun Aeration Substrate U-light is used as a drainable filler substrate beneath Optigrün Intensive Substrate I on intensive green roofs with low load capacity; higher build-up.

A semi-automatic filling machine for liquid or semi-liquid materials suitable for filling packages of any shape and size from 100 grams to 1000 grams, with a productivity of up to 800 packages per hour, suitable for small production.

ALWA repair filler (art. no. 5100001) is used in order to repair casting resin moulds. The filler is mixed with 1 – 3 % hardener powder.

Filling machine for viscous products, e.g. fruit puree with small pieces Machine performance: max. 60 cycles/min. 14.400 doses/h Special features: 4 dosing pumps with motorised individual adjustment from 0 – 500 ml Level check and control of the product pump Heatable hopper (35°C – 95°C) Fully-automatic cleaning

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SPB 1 (Screw-in version; Cap Ø 45 mm / 1.77 in) ▪ SPB 2 (Screw-in version; Cap Ø 70 mm / 2.76 in) ▪ SPB 3 (Screw-in version; Cap Ø 101 mm / 3.98 in) ▪ SPB 4 (Bayonet version for clamping jaw installation to a single mounting hole; Cap Ø 101 mm / 3.98 in) ▪ SPB 4 (Bayonet Version with six-hole bolt pattern for flange interfaces similar to DIN 24557-2; Cap Ø 101 mm / Ø3.98 in) Materials ▪ Made of non-corrosive materials ▪ Body and cap made of glass-fibre reinforced Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. Technical Data ▪ Operating temperature range: -40 °C ... +120 °C / -40 °F ... +248 °F ▪ Plastic basket (800 μm) ▪ Telescopic plastic basket (800 μm) ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air filter element ▪ Anti-splash feature ▪ Plastic dipstick with...

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SES 1 (Screw-in version) ▪ SES 2 (Welded version) Features ▪ Cap diameter of Ø62 mm / Ø2.44 in ▪ Screw-in version, equipped with male Metric ISO thread M45 x 2 and lock nut, or welded version with welding socket made of Steel (1.0718), untreated ▪ Supplied with 45 μm air filter element Materials ▪ Breather cap made of Polyamide (PA) ▪ Breather body / stud made of Polyamide (PA) ▪ Nut (type SES 1) made of Steel (1.0718); ▪ Polyamide (PA) available on request ▪ Welding socket (type SES 2) made of Steel (1.0718), untreated; Stainless Steel (V2A) available on request ▪ Air filter element made of Sintered Bronze ▪ Basket made of Polyamide (PA) ▪ Dipstick made of Steel (1.0718) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. ▪ Plastic basket (300 μm) ▪ Metal dipstick

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Features ▪ Cap diameter of Ø30 mm / Ø1.18 in ▪ Screw-in version, equipped with male BSP thread (ISO 228) Materials ▪ Body and cap made of glass-fibre reinforced Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. Technical Data ▪ Operating temperature range: -40 °C ... +120 °C / -40 °F ... +248 °F ▪ Air filter element ƒƒ▪ Anti-splash feature ƒƒ▪ Plastic dipstick with integrated anti-splash feature ƒƒ▪ Plastic dipstick with integrated magnet

Designed to be used as lockable filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBL-C (Clamping version) ▪ SMBL-P (Screw-in version) ▪ SMBL-P (Push-on version) Features ▪ Available as clamping version (with 3 clamping jaws), as threaded version (with female BSP thread) or push-on version, suitable for stand pipe mounting with pipe diameters up to 77,5 mm / 3.05 in (secured by 3 locking screws) ▪ Key-lockable cap (2 keys included) ▪ Lock protected by rotating flap ▪ Air flow in both directions, one direction only or no direction Materials ▪ Breather cap made of Aluminium, lacquered (light-grey, RAL 9022) ▪ Breather body made of Aluminium, zinc-plated ▪ Basket made of Steel, zinc-plated or Polypropylene (PP) ▪ Sealings made of NBR (Buna-N®) (standard option); FPM (Viton®) sealed version available Technical Data ▪ Operating temperature range: -30 °C ... +100 °C / -22 °F ......

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments; ideal for applications in which space is limited Features ▪ Cap diameter of Ø70 mm / Ø2.76 in ▪ Screw-in version, equipped with male BSP thread (ISO 228) or male NPT thread (ANSI B1.20.1) ▪ Bayonet version with a six-hole bolt pattern for flange interfaces similar to DIN 24557, part 2 Materials ▪ Body and cap made of glass-fibre reinforced Polyamide (PA) ▪ Socket made of Steel, zinc-plated ▪ Bayonet flange made of Steel, zinc-plated ▪ Basket made of Steel, zinc-plated or Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. Technical Data ▪ Operating temperature range: -40 °C ... +120 °C / -40 °F ... +248 °F ▪ Mounting set including bayonet flange, steel or plastic basket (800 μm), gaskets and bolts ▪ Metal basket ▪ Plastic basket ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air...

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBT-47 (Screw-in version; Cap Ø 47 mm / 1.85 in) ▪ SMBB-47 (Bayonet version; Cap Ø 47 mm / 1.85 in) ▪ SMBT-80 (Screw-in version; Cap Ø 80 mm / 3.15 in) ▪ SMBB-80 (Bayonet version; Cap Ø 80 mm / 3.15 in) ▪ SMBP-80 (Push-on version; Cap Ø 80 mm / 3.15 in) Materials ▪ Breather cap made of Steel, zinc/nickel-plated (Fe/Zn Ni 6) and free of hexavalent chromium CrVI (standard option); chrome-plated and epoxy-coated versions available ▪ Bayonet flange made of Steel, zinc-plated ▪ Basket made of Steel, zinc-plated or Polyamide (PA) ▪ Dipstick adaptor made of Polyamide (PA) ▪ Sealings made of Cork (for filler breathers without pressurisation) or NBR (Buna-N®) (for pressurised filler breathers) ▪ Metal basket ▪ Plastic basket ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air filter element ▪ Locking feature ▪ Dipstick...

Type 9.7.1 Bio - air cushion film for the AirBoy nano3 und 4 With the AirWave Bio air cushion film from FLOETER you get a biodegradable film that protects your light packaged goods. Cushion size: (WxH): 210x100mm Bio home-compostable 20 μm film For heavy to medium goods Pre-perforated for easy separation Made in Germany

With the AirWave Super ECO air cushion film by FLÖTER you get a extra thin film that protects your packaged goods. 12μm film For light to very light goods Cushion size: 210x200mm 1100m per roll Perforated for easy separation Made in Germany The AirWave Super ECO bubble wrap is available as type 7 (filler) and as type 8 (wrapper). Compatible with the AirWave1, AirWave2 and AirBoy micro air cushioning machine.

With the AirWave ClimaFilm by FLOETER you get a 100% climate neutral film that protects your goods with a zero carbon footprint. 100% climate neutral 210mm wide filler > 50% recycling materials (most of it post consumer recycled) 20 μm film (thinner gauges on demand) For heavy to medium goods Pre-perforated for easy separation Made in Germany The AirWave ClimaFilm is available as type 7 filler (to replace crumbled paper or peanuts) and as type 8 (to replace bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushioning machine.

AirWave air pillow for your AirBoy nano to protect your products. Not compatible with AirBoy nano3 and 4. 99% air - 1% film 100% recyclable material Extremely durable 2.800 cushions per roll Film thickness 20 μm For heavy to medium goods 280 rm per roll 210 x 100 mm cushion size AirWave air cusion film - Made in Germany

With the AirWave ClimaFilm by FLOETER you get a 100% climate neutral film that protects your goods with a zero carbon footprint. 100% climate neutral,100 made of recycled materials 70% materials post consumer recycled 20μm film (thinner gauges on demand) For heavy to medium goods Pre-perforated for easy separation Made in Germany The AirWave ClimaFilm is available as type 7 filler (to replace crumbled paper or peanuts) and as type 8 (to replace bubble wrap or polyethylene). Compatible with AirBoy nano3 and 4 air cushioning machines.