Moisture measuring - Import export

This measuring device is ideal for the fast determination of humidity rate in solid substances such as wood and building construction materials.

Portable moisture meter The Textometer DMB is a mobile handy device for measuring moisture on textile webs and bobbins on a wide variety of versions. It determines the moisture content of raw materials, semi-finished products and finished products precisely and quickly.

The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection

DL200P professional data logger is used for inspecting production processes, reliable climate logging, determination of material moisture and practical data readout using externally connectable sensors and USB or LAN. The USB adapter supports long term logging. The instrument is provided with external measurement sensor for measuring surface, air and material temperature and wood and building moisture, internal sensor (temperature) working on NTC principle measures in the range 20 °C to +50 °C, accuracy of ±0.3 °C and display resolution of 0.1 °C, internal sensor (moisture) working on capacitive principle measures in the range of 10 to 95 % RH, accuracy of ±2 % RH and display resolution of 0.5 % RH and external electrodes measuring wood and building moisture works on principle of resistance measuring method, measure in the range of 15 to 100 digits and accuracy of ± 3 digits.

KHM 104 BAHO Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 104 BAHO (BUILDING MATERIALS / WOOD) as in the PROFESSIONAL carrying case S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, hollow hammer electrode with steel pins, ready to operate with measuring tables for wood and building materials, 100 mm brush probe, conductive paste and red building material plug.

KHM 102 PROFESSIONAL Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 102 PROFESSIONAL S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, hollow hammer electrode with steel pins, ready to operate with measuring tables for wood in the carrying case.

KHM 101 JUNIOR Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 101 JUNIOR S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, shock electrode with steel pins, ready to operate with measuring tables for wood in the carrying case.

Digital wood moisture measuring equipment We are not only specialists for wood drying, but also your partner to contact for anything related to moisture measuring technology. Our modern, innovative company combines moisture measuring technology, control technology Our digital moisture measuring equipment with temperature compensation accurately measures: Sawn timber, chipboard, veneer, sawdust, wood chips, wood shavings, concrete, aerated concrete, tiles, screed, plaster, silica sand (sand up to a maximum of 20 %), lime plaster, concrete, paper, cardboard and also textiles and drying technology into a complete coordinated offer.

Benets of accurate moisture control Moisture measurement is one of the most-important parameters for ecient panel board production. A moisture content in raw material that is too high results in a slow-down in production speed with an increased risk of causing blows, if raw material becomes too dry excess energy will be consumed. Also the risk of re and explosion in the dryer is greatly increased. If moisture is monitored at dierent locations within the production process, valuable information will exhibit for optimization of the process. Multi-wavelength infrared light is used which is targeted to, and reected by the material surface. A certain wavelength of infrared light is absorbed by water molecules, thus more or less weakened. The weakened signal is compared to the unweakened signal. The resulting values indicate the Visualization-PC Material collector for drop chute applications (e.g. after dryer) Measuring through glass window (e.g. silo, bin, screw conveyor)

The AQUATRAC Station is a residual moisture meter that can be used both in the laboratory and in production without qualified personnel. The measurement is chemical-free and water-selective by means of capacitive dew point determination. The device is browser-based, so that complete access to all functions is possible via Chrome, IE, Firefox, etc. via network, smartphone, tablet or PC. A freely configurable material database and user-based user database with rights assignment that can be configured in small steps make working with the station simple. A Precisa scale can be coupled via USB to transfer the sample weight, and an optional label printer and signal light are available. Variable, freely combinable abort criteria for a measurement are the measuring time, the gradient H2O/min and a maximum moisture content. This makes the instrument flexible, highly precise and easy to operate both in production and in the laboratory.

The AQUATRAC-V is a residual moisture meter that can be used in the laboratory as well as in production without qualified personnel. The Measurement is reliable, water-selective and safe using a reagent the calcium hydride. The water released from the sample reacts with the calcium hydride to form hydrogen, which is measured by increasing the pressure in the system and gives a measure of the water content of the sample. This measuring principle is listed in ISO 15512:2019, "Plastics - Determination of water content" as method e.). The same standard also contains the Karl-Fischer measuring principle. The measuring instrument has a robust construction and is designed for use without qualified personnel in production and laboratory. This makes the AQUATRAC-V the world's only standard-compliant water-selective measuring instrument for use in production.

As robust as cast iron, but as easy to operate as a smartphone that’s what Wöhler’s new flue gas analyzer feels like in your hand. Appropriately, the advantages are equally substantial: A tip with your finger on the Wöhler A 550 is all that is required to perform analyses, inspections and settings on residential and commercial appliances. The flue gas analyzer is equipped with coded connections for the 4 Pa test and even »NEW AND UNIQUE« a wood moisture content measurement function to VDI Guideline 4206 (VDI = Association of German Engineers). * Effective condensate protection * Automatic CO clean out pump protects CO sensor (Wöhler A 550) * 4-filter technology – easily accessible * Analyzer and sensor diagnostics * Sensor replacement – user-friendly * Rechargeable battery operating time: more than 12 h with Lithium Ion power * Hose assembly – robust and flexible