Slips - Import export

SHIP LAUNCHING SLIP COAT

GAT is a manufacturer and supplier of highly advanced Slip Rings and Rotary Unions. Further to an extensive range of standard products, we also provide individual solutions as your competent partner. Our Slip Rings are based on a modular system and are available with contacting and contactless transmission technology. Combined units comprising Rotary Unions are also available and can be realized as compact units. Compliance with specific directives or protection classes as well as certifications in accordance with UL/CSA can be provided on request.

Self-adhesive conformable anti-slip tape for securing uneven tread surfaces, e.g. made of checker or lens plates. • Self-adhesive conformable anti-slip tape for improved safety of paths and treads • Suitable for indoor and protected outdoor use • The conformable aluminium tape adapts to uneven surfaces and is particularly suitable for surfaces made of checker or lens plates • Areas of application are steps, ramps, industrial floors and treads on machines and vehicles • In accordance with ASR A1.5/1.2 "Floors" to DIN 51130 slip resistance (R group) R13

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

LAUNCHING GREASES - SLIP COAT

When rolling off a load over the floor, the heavy load can slip uncontrollably on the smooth warehouse floor. There is considerable risk of accidents. Expensive equipment can be damaged under their own weight and may require timeconsuming reprocessing. secutex turning mats (see figure above) are completely slipresistant. The turning manoeuvre can be performed safely and smoothly.

Optigrun Anti-Slip System N is used on roofs with 15 - 45° roof pitch, if needed in combination with Optigrün Fastening Profile.

Optigrun Anti-Slip System T for green roofs with roof pitches ranging from 15 to 45°; load distribution against the eaves.

Slip rings provide the basis for rotating current transfer and all its demanding applications. Which challenges can we meet for you? In combination with our slip rings, brush holders fitted with carbon brushes ensure that the current to be transferred is collected. Thanks to their increased vibration resistance, solid-cast slip rings can withstand high mechanical and electrical loads. These are available from MACK in many different versions, many of which are even available from stock.

The small slip-ring system in combination with the matching modular slip-ring system is our first choice for you for current and signal transmission in small spaces. With its low 16 mm height, the MACK small slip-ring system can transfer current up to 25 amperes per pole reliably. Its 15 mm high little brother is designed for 15 amperes.

LAUNCHING GREASES - BASE COAT

LAUNCHING LUBRICANTS

The ROTOKOMBI system allows all rotary union and slip ring types to be combined. The result is a complete rotary transmission system from a single source, with perfectly matched interfaces. ROTOKOMBI systems ensure that an optimally adapted sealing system is available for any medium. For any type of electrical transmission a corresponding system is selected to ensure adequate reliability. Thanks to the modular design, individual components can be replaced, retrofitted or upgraded as necessary. All components are selected and combined to meet your specific demands, without limitations to the number of electrical poles, media or size. Special solutions such as ATEX/IECEx or certifications according to UL/CSA regulations are also available on request.

SHIP LAUNCHING BASE COAT

as a protection, separation and slip layer to protection the waterproofing as a second slip layer in conjunction with PE film 0.2 mm under public areas to prevent the transfer of shear and tensile forces for the chemically neutral separation of two incompatible materials Specific properties resistant to bitumen and polystyrene resistant to most chemicals smooth surface ageing resistant moisture-blocking thermally weldable

Our individually combinable components for modular slip ring systems offer you maximum flexibility in planning your rotating current and data transmission systems. The individual components from MACK are available in different sizes and versions – from space-saving slip rings to the solid power ring for high currents. Naturally in connection with the right current collector. What characterises this system is optimum adaptability for every single customer application and installation situation.

Thin sheet made from recycled polyethylene for use as a separation, protection and slip sheet.

Versatile The nonslide diamond surface of Solid is available in two variants. AGO-Solid: In standard sheets with dimensions of 2,100 x 500 mm or cut to size. One-sided rubberized. Solid-Topsoft: In rolls max. 400 m x 1,550 mm. Smaller rolls are available on request.

Versatile The nonslide diamond surface of Solid is available in two variants. AGO-Solid: In standard sheets with dimensions of 2,100 x 500 mm or cut to size. One-sided rubberized. Solid-Topsoft: In rolls max. 400 m x 1,550 mm. Smaller rolls are available on request.

Optigrun Anti-Slip System for green roofs with roof pitches of up to 45°; with thrust thresholds and stainless steel cables.

Special fleece to protect roofs, providing a combination of protection, separation and glide functions. Suitable for public roofs when its laminated glide layer is used in combination with an approximately 0.2 mm thick PE foil, thus conforming a glide fleece.[Translate to English:] Special fleece to protect the roof waterproofing with a combined separating and sliding function In combination with the PE separating and sliding film TGF 0.2, it is suitable as a protective and sliding layer for traffic roof structures Coefficient of friction with additional PE film <0.6 according to the requirements of the FLL (DIN 53375)

With non-slip foam underside and fabric surface. Non-slip. • Mouse pad with non-slip foam underside and textile surface

Push-pulls enable transportation of loads with inexpensive and place saving slip-sheets which are usually made of plastic or cardboard. This KAUP attachment makes expensive and unwieldy wooden pallets superfluous and optimal economical loading of overseas containers possible.

Birch Plywood 1250x2500 B/BB is a high-quality plywood produced by the Kazakhstan manufacturer SFK. This plywood is exclusively made from Kazakh birch wood and holds European CE and FSC Controlled Wood certifications, ensuring its quality and environmental sustainability. The B/BB grade indicates that one side of the plywood (B) has a smooth, clear surface with minor imperfections, while the other side (BB) may have knots or patches. The fibers of the plywood are oriented in a specific direction, which is important for applications that require strength in a particular dimension. This plywood is commonly used in furniture making, cabinetry, and other interior applications where a smooth surface and aesthetic appearance are essential. The reliability and durability of SFK’s birch plywood make it a preferred choice for professionals in various industries.

Experience the pinnacle of durability with the Kazakhstan Birch Plywood 1250x2500x1250 F/W, expertly crafted by SFK, a leading Kazakh manufacturer committed to quality and environmental sustainability. Certified by European CE and FSC Controlled Wood, this plywood is made exclusively from local Kazakh birch wood. The F/W grade features a high-quality film face (F) on one side and a wire mesh (W) pattern on the other, providing a superior non-slip surface essential for flooring applications in transportation and construction. The exceptional quality of the film used ensures enhanced durability and resistance to wear and tear. Additionally, the engineered fiber orientation of this plywood provides strength in specific dimensions, making it ideal for various demanding applications. Trust SFK’s birch plywood for a reliable, durable, and environmentally responsible solution for your specialized needs.

Discover the superior quality of Kazakhstan Birch Plywood 1250x2500 BB/BB, proudly manufactured by SFK. Sourced exclusively from Kazakhstan's birch forests and certified by European CE and FSC Controlled Wood, this plywood guarantees not only strength and durability but also environmental responsibility. The BB/BB grade signifies that both sides of the plywood have minor imperfections, such as knots or patches, making it ideal for applications where the surface finish is not critical. The specific orientation of the wood fibers ensures strength in particular dimensions, making it suitable for a wide range of applications, including construction, packaging, and furniture manufacturing. Trust in the reliability and durability of SFK’s birch plywood, a preferred choice for professionals in various industries who seek a balance between quality and environmental sustainability.

Extra flat mouse pad with a non-slip surface so you can easily position the cursor. • Extra-thin mouse pad • With velvety surface

• The indestructible water pump pliers, with safety box joint for highest stress • Double-toothed jaws • Cogs additionally induction hardened • Optimum jaw geometry with self-locking serration • Gripping capacity 40% above ISO by means of arch-shaped pitch adjustment • Ideal fulcrum, minimum effort • Finger trap protection for safe work, prevents injuries caused by squeezing • Box joint with wide guide surfaces • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of chrome vanadium steel, forged, oil-hardened

The L3 plastic pallet is the ideal load carrier for use in intralogistics. This plastic pallet convinces with high load capacity of up to 2.000 kg in high rack. Thanks to a standard fitting with Palgrip® anti-slip strips on the top deck, the load is safely stored on this pallet - even in inclined position. The constant high quality despite increasing circles makes the pallet highly economical, it remains error- and maintenance-free. The closed Palgrip® anti-slip runners of the L3 plastic pallet enable smooth running on all standard conveyor elements in intralogistics processes. Dimensions L x W x H: 1200 x 1000 x 160 mm Weight: 26,0 kg Material: HDPE Load capacity: static 7500 kg, dynamic 2000 kg, In Racking System 2000 kg Reinforcement Profiles: 5 Colour: light grey / light blue or basalt grey / light blue Runners: 5, welded Palgrip®-Anti-slip top deck Option: — Rim options: Without, 7 mm — Palgrip® anti-slip runners