Waste containers - Import export

Nominal Volume: 360 l Nominal Payload: 144 kg + certified waste bins 360 litre + UN-approved for the transport and collection of dangerous materials + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II + liquid-tight / watertight (without drainage hole) + waste container with triangular slamlock + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + clinical / hospital waste bins with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + wheelie bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol + medical waste containers for sharp and pointed instruments, anatomy / pathology waste and infectious waste

Nominal Volume: 240 l Nominal Payload: 96 kg + certified waste container 240 litre + UN-approved for the transport and collection of hazardous goods and hospital waste + wheelie bin marked for clinical waste in accordance with UN3291, packaging group II + liquid-tight / watertight (without drainage hole) + waste bin with triangular slamlock + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste container with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + our waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol + waste containers for hospitals & clinical waste

Nominal volume: 10 L + with folding, zinc-plated, corrosion-protected steel wire carrying handle + resistant to frost, heat, UV radiation and chemicals + available in green and brown + integrated stacking ribs allow for stacking of the trash/garbage cans + the container’s smooth surfaces are easy to clean + environmental protection: Our pre- sorting containers can be fully recycled at the end of their useful life.

Nominal volume: 50 L + manufactured by compact injection moulding process in accordance with DIN 30713 + manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + extremely rugged and durable material; resistant to frost, heat, UV radiation and chemicals + stackable, thus facilitating space-saving storage and transportation + quick and easy installation on posts, pillars, walls or grating + lockable with triangular key as standard feature + available in orange or green; additional colours upon request + all metal parts are zinc-plated and corrosion-resistant + environmental protection: the litter bins can be fully recycled at the end of their useful life

Nominal volume 60 L Nominal loading capacity 40 Kg + manufactured by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + the waste bins are manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to frost, heat, UV radiation and chemicals + stepped comb-lift + with continuous handle for easier handling + external 200 mm diameter wheels ensure stable running + zinc-plated steel axle, corrosion-proof + all usual colours and combinations (e.g. grey, brown or green) available + smooth inside and outside surfaces of the waste recycling bins prevent adhesion of waste; this simplifies cleaning of the container + ribbed chipnest for secure mounting of transponders/data carriers (RFID chips); compatible with the most widely-used weighing and ID systems + mobile waste bins comply with the requirements of EC directive 2000/14/EC and are marked with both the CE symbol and the appropriate noise level

Nominal volume: 120 L Nominal loading capacity: 48 Kg + manufactured in accordance with the specifications of DIN EN 840 and RAL GZ 951/1 using the compact injection moulding process + produced from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV radiation, high and low temperatures as well as chemicals + standard emptying by stepped comb-lifting device (shape A), reinforced by additional ribs + equipped with two solid rubber maintenance-free wheels (standard diameter 200 mm) + zinc-plated continuous steel axle, corrosion-proof + drip edges on the inside of the lid prevent the escape of evaporating liquids + available in grey (black), green, brown, yellow, blue, etc. + ribbed chipnest, compatible with the most-widely-used ID and weighing systems, for secure mounting of transponders/data carriers + complies with the requirements of EC directive 2000/14/EC and is marked with both the CE symbol and the appropriate noise level (LWA)

Nominal volume 140 L Nominal loading capacity 56 Kg + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 from specially developed, high molecular weight, high-density polyethylene (HDPE) + manufactured by the compact injection moulding process + durably UV-stabilised, extremely resistant to cold, heat and chemicals + optimal pouring receivers through stepped ridge bar + sturdy lid with ergonomic handles + continuous handle-grip + smooth surfaces allow for quick cleaning + external solid rubber wheels ensure good stability and stable running + corrosion-protected steel axle + available in all standard colours (e.g. grey, green, blue or brown) + manufactured ready to accommodate data carriers/transponders + complies with the noise control regulation in accordance with EC directive 2000/14/EC and is marked with the appropriate decibel level + all parts of the wheelie bins can be fully recycled at the end of their useful life

Nominal volume 180 L Nominal loading capacity 72 Kg + manufactured in accordance with the requirements of DIN EN 840 and RAL GZ 951/1 + produced by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised, extremely resistant to cold, heat and chemicals + stepped comb-lift for maximum safety during emptying + 200 mm diameter stable and smooth-running wheels; available with 250 mm diameter wheels + zinc-plated, corrosion-proof steel axle + available in standard colours of grey, green, blue and brown; additional colours available + ribbed chipnest for secure mounting of transponders/data carriers; compatible with the most widely-used identification and weighing systems + equipped with a centrally-located foot step at the rear for easier handling + strong ribs allow for high stacking + Weber wheelie bins can be fully recycled at the end of their useful life

Nominal volume 240 L Nominal loading capacity 96 Kg + manufactured by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + produced from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, resistant to chemicals and temperature variations + emptied by a stepped comb-lift, shape A + quiet-running, solid rubber wheels, standard diameter 200 mm, also available with 250 mm diameter + corrosion-resistant, zinc-plated steel axle + all usual colours and combinations (e.g. grey, blue, green or yellow) available + ready to accommodate data carriers/transponders (chipnest) + marked with the appropriate noise level and the CE symbol in accordance with the regulations of directive 2000/14/EC + smooth surfaces facilitate easy cleaning + the lid is equipped with ergonomic handles + stacking ribs allow for high stacking + all parts of the wheelie bins can be recycled at the end of their useful life

Nominal volume 360 L Nominal loading capacity 144 Kg + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 + resistant to UV, frost, heat and chemicals + emptied by stepped comb-lifting device (shape A), reinforced by additional ribs + equipped with two solid rubber maintenance-free 200 mm diameter wheels; also available with 300 mm diameter wheels + corrosion-protected steel axle, zinc-plated + with integrated chipnest in the frontal comb; accommodates transponders (RFID chips) compatible with the most widely used ID and weighing systems + available in standard colours of grey, green, blue and brown; additional colours available + strong ribs allow for high stacking + with raised edge to prevent water ingress (e.g. during rain) + meets the requirements of EC directive 2000/14 EC.

Nominal volume: 660 L Nominal loading capacity: 270 Kg + manufactured by compact injection moulding process from high molecular weight, high-density polyethylene (HDPE) in accordance with the test + regulations of DIN EN 840 and RAL GZ 951/1 + resistant to frost, heat and chemicals; stabilised against UV radiation + standard emptying options of either DIN or comb-lifting device; optionally with Ochsner handles of zinc-plated steel + quiet-running, full rubber heavy-duty castors of 200 mm diameter, 360° swivel range + wheel stop brake system (dual stop) as standard feature; alternatively available with central braking system + zinc-plated, corrosion-resistant metal parts + frontal comb is equipped with a chipnest to accommodate data carriers in accordance with DIN 30745 and RAL GZ 951/1 + optimised for high stacking with strong stacking ribs + drain plug in the bottom facilitates cleaning + available colours: grey, blue, brown and green

Nominal volume: 770 L Nominal loading capacity: 310 Kg + from high-quality, high-density polyethylene (HDPE), manufactured by compact injection moulding process + complies with the regulations of DIN EN 840 and RAL GZ 951/1 + tested, monitored and marked with the GS symbol (Tested Safety) in accordance with the German Product Safety Act. + resistant to UV rays, frost, heat and chemicals + fits all standard lifting devices (DIN and comb-lifting); available with Ochsner handles from zinc-plated steel + equipped with quiet-running, solid rubber heavy-duty castors, 200 mm diameter, 360° swivel range, wheel stop as standard feature; also available with central braking system + corrosion-resistant, zinc-plated metal parts + available colours: grey, blue, brown and green, additional colours upon request; all colour pigments used are colour-fast + with chipnest as standard, to accommodate transponders/data carriers in accordance with DIN 30745 and RAL GZ 951/1

Nominal volume 1100 L Nominal loading capacity 144 Kg + manufactured in accordance with the regulations of DIN EN 840 (Parts 3, 5 and 6) and RAL GZ 951/1 + are suitable for both DIN and comb-lifting devices (form A in accordance with EN 840-3) + easy-to-move, spring-supported sliding lid, lockable in three positions + high-quality high-density polyethylene (HDPE) + UV stabilised, resistant to frost, heat and chemicals + 200 mm diameter quiet-running, solid rubber heavy-duty castors, 360° swivel range + available with wheel stop/double stop or central braking system + corrosion-resistant metal parts + the lid is attached to the body with high-strength polyamide hinges. Corrosion-protected metal springs keep the lid closed + can be easily moved from all sides by using the four lateral handles on the body + the waste bin features a standard water drain (2 inch water drainage hole) + available in all usual colours and combinations (e.g. grey, blue, brown or green)

Nominal volume 1100 L Nominal loading capacity 440 kg + manufactured in accordance with DIN EN 840 (Parts 3, 5 and 6) and RAL GZ 951/1 from high-quality, high-density polyethylene (HDPE) + UV stabilised; resistant to frost, heat and chemicals + suitable for both DIN and comb-lifting devices (form A according to EN 840-3) + 200 mm diameter quiet-running, solid rubber castors with 360° swivel range + standard equipment features 2 x wheel stops (double-stop); also available with central braking + all metal parts are zinc plated and thus corrosion-resistant + easy-to-move, spring-supported sliding lid, lockable + the lid is attached to the body with high-strength polyamide hinges; corrosion-protected metal springs keep the lid closed + easy filling through additional smaller lid + can be easily manoeuvred using the side handles on the bin + features a standard 2-inch water drain including drain plug + all usual colours and combinations (e.g. grey, blue or green) available

Nominal volume 1100 L Nominal loading capacity 440 kg + produced by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + suitable for both DIN and comb- lifting devices; the lifting trunnions for DIN devices are reinforced with steel inserts + 200 mm diameter quiet-running, solid rubber castors with 360° swivel range + standard equipment features 2 x footbrakes; available with central braking + all metal parts are zinc plated and resistant to corrosion + all colours, e.g. grey, blue and green, available + with integrated chipnest in the frontal comb to accept transponders/data carriers + well-positioned handles for convenient handling + standard equipment includes 2-inch water drain with locking plug + conforms to requirements of directive 2000/14/EC and displays the CE mark and appropriate noise level

Nominal volume 1100 L Nominal loading capacity 440 kg + waste containers produced in accordance with DIN EN 840 and RAL GZ 951/1 + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + stepped comb-lift for maximum safety during emptying; optional emptying by lifting trunnions reinforced with steel inserts + easy filling through smaller lightweight lid + 200 mm diameter quiet-running, solid rubber castors with 360° swivel range + standard equipment features 2 x footbrakes; also available with central braking + chipnest to accept transponders/data carriers, compatible with common weighing and ID systems + all metal parts are zinc plated and resistant to corrosion + well-positioned handles on body and lid for convenient handling from all sides + smooth inside and outside surfaces allow for easy cleaning

Nominal volume 1100 L Nominal loading capacity 440 kg + produced by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + stepped comb-lift for maximum safety during emptying; optional emptying by lifting trunnions reinforced with steel inserts + 200 mm diameter quiet-running, solid rubber castors with 360° swivel range + standard equipment features 2 x footbrakes; also available with central braking + with integrated chipnest in the frontal comb to accept transponders/data carriers, compatible with common weighing and ID systems + all metal parts are zinc plated and resistant to corrosion + well-positioned handles on body and lid for convenient handling from all sides + standard equipment includes 2-inch central water drain in the base with locking plug

Nominal volume: 80 L Nominal loading capacity: 40 Kg + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, insensitive to temperature variations and chemicals + stepped comb-lift, reinforced with ribs, for maximum safety when emptying the waste bins + very stable; fitted with 200 mm diameter solid, quiet-running rubber wheels + corrosion-resistant, zinc-plated steel axle + lid with drip edges minimises the escape of condensation water + the waste bins are available in standard colours grey, green and brown; additional colours available + with chipnest in the frontal comb to accommodate transponders (RFID chips), + compatible with the most widely-used ID and weighing systems + complies with the noise control regulation in accordance with EC directive 2000/14/EC and is marked with the appropriate noise level

Nominal volume: 770 l Nominal payload: 310 kg + Weber waste containers made of polyethylene (HDPE) in a compact injection molding process in accordance with EN 840-2 + lid with easy-to-open insert lid (lid in lid) making the wheelie bins particularly user-friendly + our waste bins are resistant to UV, frost, heat and chemicals + all metal parts of the waste containers are corrosion-resistant thanks to galvanic zinc plating + wheelie bins with integrated chip nests in the front mount for holding transponders / data carriers + conforms to the requirements of Directive 2000/14 / EC. The wheelie bin is CE-marked and has a guaranteed sound power level + optionally with lateral trunnions + standard colors blue, green, grey and brown - other colors are optional

Nominal volume: 660 l Nominal payload: 270 kg + Weber large waste bins / waste containers made of polyethylene (HDPE) in a compact injection molding process in accordance with EN 840-2 + lid with easy-to-open insert lid (LIL, lid in lid), making the waste bins particularly user-friendly + resistant to UV, frost, heat and chemicals + all metal parts of the wheelie bins are corrosion-resistant thanks to galvanic zinc plating + waste container with an integrated chip nest in the front mount for holding a transponder + conforms to the requirements of Directive 2000/14 / EC. The waste bin is CE-marked and has a guaranteed sound power level + optionally with lateral mounting pins + standard colours grey, green, blue and brown - other colors are optional! + please visit our website for more information on additional options, spare parts, etc.

Nominal Volume: 1100 l Nominal Payload: 440 kg + 1100 litre certified waste bins + UN-approved for the transport and collection of hazardous goods + watertight (without drainage hole) + waste containers with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste bins with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + waste containers meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Nominal Volume: 770 l Nominal Payload: 310 kg + 770 litre certified waste container + UN-approved for the transport and collection of dangerous materials + liquid-tight / watertight (without drainage hole) + waste bin with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste container with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + Weber waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Nominal Volume: 660 l Nominal Payload: 270 kg + 660 litre certified clinical / hospital waste containers + UN-approved for the transport and collection of dangerous materials + liquid-tight / watertight (without drainage hole) + waste bin with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste containers with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Reducing transportation costs, compressing material for feeding to existing pressed-waste containers or baling presses, or shredding of material for conveyor belt feeding are good reasons for deploying a cardboard shredder. With the EKZ cardboard shredder and FKZ paperboard shredder, ERDWICH’s two rugged machines offer 100% process reliability in a range of form factors. Whether you need to shred packaging or process cardboard waste for feeding into existing conveyor systems, ERDWICH can always offer you a perfect solution tailored to your requirements.

The 660-1100 l wheelie bins MGBneo⁴ are ideally suited for industrial applications and any kind of high-volume waste. The 4-wheel container complies with DIN EN 840 and RAL-GZ 951/1 (GGAWB). Characteristics: — High manufacturing quality and long lifetime — Strengthened front comb for highest safety during emptying — Steel-reinforced lifting trunnions ensure safe and robust lifting — Handles on all sides of the body — Lid design prevents water ingress when opening the lid

Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. Advantages of clamp connection: - Less connecting pieces - Fast segment connection - Clamps can be “stored” at the segment - Stepless segment positioning with height offset

Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - Infinitely adjustable for diameters from 2 - 5 meters, and 5 meters to infinite - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces - Compatible with all PASCHAL systems

• rapid and efficient de-scaling of fish by means of a wide special blade • the waste scale container can be closed with a lid for clean working