Monitoring devices - Import export

Pressure on price and quality continue to rise. The need to monitor even the simplest manufacturing and assembly process is increasingly common. With 100% monitoring of force/ time curves or force displacement/time curves, the Force- Master satisfies all requirements for ensuring the reliability of even simple press-fit processes. Thanks to its ultra-simple, single-button operation and intelligent auto-configuration, even semi-skilled staff can set up the equipment safely and quickly. "Card & Go" is the smart system that uses master, tool and PLC smart cards to make equipment settings, inhibit unauthorized changes and to trigger actions in sequence with the production process. The ForceMaster 9110 has been developed specifically for monitoring manual lever presses. Simple manual workstations can be monitored extremely efficiently using the ForceMaster. Easy control functions that used to require an additional PLC can now be performed reliably with the ForceMaster.

Everywhere, where digital signals must be electrically separated and processed or current and voltage limited power supply is needed, our interface devices are used such as isolating switching amplifiers, solenoid drivers, relay couplers and rotation speed monitors. The interface devices are available in the IP20 modular housing for DIN rail as well as in the compact IP67 housing for decentralized remote-site use. The product portfolio also comprises solutions for the Ex area and SIL-certified devices.

RockWorks is a real-time management system for RockNet and enhances the remote operation of complex widespread networks. Each RockNet device can be monitored and con gured on screen according to the front panel operation. RockWorks enables labeling of each device and channel within the network. The software provides alarm indications and allows for a network- wide default reset of channel parameters and naming. For a more comfortable setup, RockWorks also features an offline editor. RockWorks MY Card Preset Dialog The RockWorks preset dialog provides full access to RockNet MY interface card presets and allows for the individual configuration of emulation mode, channel routing, microphone pre-amp count (RN.301.MI/RN.101.IO) as well as sync master settings. A total of 15 presets (1...9, A...F) can be configured. Presets are activated by using the rotary switch on the front panel of the RockNet MY cards. In order to enable maximum flexibility in routing, the number of dropped...

Riedel puts the world on the air over Skype. Riedel’s STX-200 broadcast-grade professional Skype interface brings any Skype user worldwide into professional broadcast workflows. The reliable, 1 RU, single-box solution allows broadcasters to engage with both reporters and viewers in live programming. The Skype TX Control software provides customers with the ability to manage multiple Skype TX channels from a single user interface. Other parameters that the software manages include stream resolution, aspect ratios, FPS, logo overlays, and various audio options. Riedel’s STX-200 also offers unique device monitoring functions, such as temperature measurement and system status, that can be monitored by means of Simple Network Management Protocol (SNMP). Licensed by Microsoft, the STX-200 offers broadcast-quality HD- SDI and balanced XLR audio I/Os. Previously, users relied on consumer PCs running common Skype clients that then needed to be integrated with scan and HDMI-to-SDI...

We are your reliable partner for the realisation of your products - from the initial idea to series production and beyond. Our goal is to offer you a comprehensive full service and to manufacture your products economically and in the highest quality. We support you in the consultative development of your early concepts and prepare an initial cost estimate in the concept phase. In addition, we accompany you during series and mass production with our long-standing manufacturing partners in the Far East and ensure reliable logistical handling.

Electronic temperature monitoring devices - Thermal cut-out - Thyristor units - Temperature controllers

Imbalances on rotating drive shafts can be detected and eliminated with the VIBXPERT II balancer. The smart measuring principle and the powerful computing capacity enable balancing on one or two planes. Various operating modes are available for balancing, so that a perfect result is always achieved. VIBXPERT II Balancer can be upgraded to a highperformance condition monitoring device VIBXPERT II, including all operating modes for machine condition monitoring.

The Laser Mini offers a selective measurement of methane without interfering cross-sensitivities. The device monitors itself and is therefore almost maintenance-free. Thanks to the menu navigation in conjunction with supporting displays of the measurement history, absolute value, etc., the Laser Mini is easy and safe to use even by inexperienced users. The Laser Mini only needs to be switched on.

The GM 5 from Schütz Messtechnik always offers the highest accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow and can then adapt to the changed measuring environment and set, monitor and adjust the volume flow. In addition to reliable measurement results, optimal stability and constant response times are achieved. The menu navigation in connection with the automatic measuring range selection makes the GM 5 easy and safe to use by any user at any time. All that is required for commissioning is the selection of a task in the main menu and the measuring device independently sets the sensor selection, measuring range, pump output and alarm message according to specified specifications.

The GM 3100 offers even higher accuracy of results even with changing tasks, since it can be set for different measuring tasks and environments. The device monitors the intake volume flow and can adapt to the changed measuring environment, preset, monitor and the volume flow. In addition to reliable measurement results, optimal stability and constant response times are also achieved. Thanks to the menu navigation in connection with the automatic measuring range selection, the measuring system GM 3100 is easy and safe to use even by an inexperienced user. For commissioning, all you have to do is select a task in the main menu, for example gas detection, and the measuring device then automatically sets the sensor, measuring range, pump output and alarm message according to a defined program.

The GMS 4000 offers even higher accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow as well. In addition to reliable measurement results, optimal stability and constant response times are also achieved. The easiest maintenance and maximum accessability because the intelligent measuring sensors can be quickly replaced without configuration problems, if necessary. Thanks to the menu navigation in connection with the automatic measuring range selection, the measuring system GMS 4000 is easy and safe to use even by an inexperienced user. All that is required for commissioning is the selection of a task from the main menu, e.g. gas detection. From there the measuring device sets itself automatically according to a defined program, sensor selection, measuring range, pump output and alarm message.

CSN ® Explosion proof cartridge heaters as direct heaters for liquids or gases in hazardous environment. These units are equipped with a heating bundle or a replaceable ceramic heating element. For temperature control these heaters are available with an integrated temperature monitoring system. These devices are available in various material grades. The electric cartridge heating element type 93./..EEx….T.(.) is designed for the heating of liquids in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 2014/68/EU) Art. 4, Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL Further information about our CSN® ExCartridge Heater

The water analyzer measures residual oxygen concentration, pH values and conductivities of the boiler feed water and pH values of the boiler water. — For the fully-automatic measurement and monitoring of the boiler water quality — Increase in operating safety thanks to continuous monitoring of the water values — Automated monitoring with constant measurement of the pH value, oxygen content and conductivity — Savings on chemicals thanks to needs-based dosing of additives — Increased system efficiency through reduced desalting losses and saving of exhaust vapour energy — A water analysis device can monitor up to three boilers at a time and be integrated into plant control systems with control technology

Clear and nicely designed control centre for your entire PC or HiFi equipment. This device also perfectly serves as a work pad for your notebook or monitor. Up to 6 different devices can be switched easily and separately. 1 main switch 2-pole and 6 device switches 1-pole, all illuminated for quick and easy control. Surge and lightning protection up to 19.500 A to protect all devices connected, e.g. against indirect lightning strikes. Integrated HF-filter against high-frequency failure. Childproof sockets. In colourful display-packaging. Cable length: 2 m Cable: H05VV-F 3G1,5 Measurements: 38 x 30 x 6 cm Socket: 6 Nominal current: 16 A Interference filter: EMI/RFI USB-ports: - Plug-in system: DE

Force-of-gravity separators, which are used as pre-filters or for the separation of large quantities of dust and swarf. Cyclone separator Cyclones are force-of-gravity separators. The separation principle is based on centrifugal force, which is produced by the tangential injection of the raw air. Cyclones are used as pre-filters or for the separation of large quantities of dust and swarf. The degree of separation of a cyclone is not normally sufficient to meet the usual environmental protection requirements. The cyclone exhaust air must be post-filtered in most cases. Product description A cyclone essentially consists of three parts: the intake cylinder, the cone and the immersion tube. In the intake cylinder, the raw air is brought into a circular path by means of tangential injection. Due to the taper of the subsequent cone, the speed of rotation increases sharply, so that the particles are pressed by centrifugal force against the outer wall and decelerated by friction, causing them to drop out of the air stream and fall down. The cleaned air leaves the cone in an upward direction via the central immersion tube. Cyclones are usually welded sheet steel structures. Cellular wheel sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

Saving energy by intelligent switching. Clear and nicely designed control centre for your entire PC or HiFi equipment. This device also perfectly serves as a work pad for your notebook or monitor. Up to 6 different devices can be switched easily and separately. 1 main switch 2-pole and 6 device switches 1-pole, all illuminated for quick and easy control. Surge and lightning protection up to 19.500 A to protect all devices connected, e.g. against indirect lightning strikes. Integrated HF-filter against high-frequency failure. 4-fold USB-Hub 2.0 to connect additional USB-devices. USB-cable included. Childproof sockets. In colourful display-packaging. Cable length: 2 m Cable: H05VV-F 3G1,5 Measurements: 38 x 30 x 6 cm Socket: 6 Nominal current: 16 A Interference filter: EMI/RFI USB-ports: 4 Plug-in system: DE

Electrostatic Innovations from Eltex have been creating safety in hazardous areas for over 60 years: Controlled electrostatic grounding protects production sites and employees when handling highly flammable and explosive substances. The TERRAPHARM grounding device combines proven TERRABOX technology with the specific material requirements of the pharmaceutical industry.

Electrostatic Innovations from Eltex have been creating safety in hazardous areas for over 60 years: Controlled electrostatic grounding protects production sites and employees when handling highly flammable and explosive substances. The TERRACAP TCB040 grounding system is used to ground tanker trucks. If a connection has sufficient low resistance when the grounding clamp is attached, the device discharges electrostatic charges safely via a resistor preventing spark discharge. The device then checks the capacity detected at the clamp. If the capacity for the tanker truck is correct, a green display lights up and the interlocking relay enables the pumping process. The device then forms a low-resistance connection to the ground, which prevents further build-up of electrostatic charges.

Professional defibrillators for emergency medicine. Reliable: always, everywhere. When every minute counts, PRIMEDIC™ defibrillators can help hearts stop missing another beat. Everywhere. What matters is that they can be used quickly. Every time. This is what the HeartSave AED-M delivers Monitor In addition to the advantages of the AED, the AED-M is equipped with a monitor for displaying action time, ECG curve, heart rate, detected VF as well defibrillations generated and BLS instructions. The high-resolution monitor ensures that the device can also be used under difficult conditions. Monitoring A separate ECG cable and standard ECG electrodes can also be used to provide cost-effective monitoring. Features Voice prompts in 4 languages Freely selectable language packs 6 year lithium battery Compact flash card, ECG viewer 

The active Eltex grounding clamps from the TERRACLAMP and the 70 series are used together with the TERRALIGHT and the Terra-Control TUE30 ground monitoring system to establish and monitor grounding connections. These devices are used when decanting or filling potentially explosive substances. Existing electrostatic changes are discharged effectively in a controlled manner. The active grounding clamps from the TERRA-C/S, TERRA-C/B, 70AG, 70BG, 70CG (only for TCB040), 70AK and 70HK series feature extremely hard and sharp collet jaws. The jaws also feature a continuously high clamping force, ensuring a secure connection to the equipotential bonding at all times. The standard version of the grounding clamps includes a plug-in-connector for an easy connection to the included grounding cable, spiral cable and rewinding cable reels.

The new Cleco TULMan Electronic Counter is a universal product designed to effectively manage pneumatic tools, allowing users to monitor tool usage, and implement preventative maintenance. The TULMan Electronic Counter enables maintenance intervals or calibration checks to be set based on cycles or run time. A yellow LED light warns when the cycle or run time limits are near, while it turns red when cycle or run time limits have been reached. The electronic counter can also allow users to track tool usage or compare product usage among different operators to improve productivity and processes.

The Hub intelligent control panel is a key element of the Ajax security system. The device monitors operation of all Ajax detectors and immediately sends an alarm signal to the owner and the Central Monitoring Station.

The forming line consists of machines for orienting and forming a multi-layer strand mat for OSB production. The forming line consists of two mat formers including disc orienter heads to create the surface layer and one or two mat formers including pocket orienter heads to create the core layer. The threelayer strand mat thus produced enables high orienting degrees and is a prerequisite for meeting the relevant OSB-standard requirements. Additional devices for quality monitoring complete the function of Siempelkamp’s forming line. The plant modules can be adjusted to the respective requirements thus preparing the mat optimally for its compaction in a ContiRoll®. The equipment is designed to produce board thicknesses between 6 and 38 mm without any problem. The forming belt conveyor is a modular design as well tuned to plant output and feasible board formats.

MDF forming lines consist of machines for forming and monitoring the bre mat. Additional devices for quality monitoring complete the function. The plant modules can be adjusted to the respective requirements thus preparing the mat optimally for its compaction in a ContiRoll®. The equipment is designed to produce board thicknesses between 1.5 and 40 mm without any problem. The forming belt conveyor is a modular design as well tuned to plant output and feasible board formats. Features Forming belt with pneumatic tensioning station as well as electric drive station and integrated automatic reject m Integrated belt scale for controlling the mat former output to ensure consistent product quality Mat moisture meter Automatic edge trimming system ex prepress Monitoring equipment to prevent steel belt damage peak detectors metal detector

The particleboard forming line consists of machines for forming and monitoring the particle mat. Additional devices for quality monitoring complete the function of Siempelkamp’s forming line. The plant modules can be adjusted to the respective requirements thus preparing the mat optimally for its compaction in a ContiRoll®. The equipment is designed to produce board thicknesses between 6 and 40 mm without any problem. A typical particle mat former consists of one or two mechanical mat formers for the core layer and two wind sifters for the top and the rear surfaces. The three-layer particleboard thus produced distinguishes by a homogeneous, core layer consisting of coarse particles and two surface layers, the particle size of which is decreasing from the core to the outer faces.

The measuring device Softcontrol Smart for monitoring the water hardness is small, compact and particularly simple for more security of your processes and without constant maintenance of the monitoring device. This compact solution can be installed on any water softener regardless of type and size. The hardness limit is continuously and reliably checked. If the limit value is exceeded, a brine alarm or service is required, an alarm is issued via potential-free contacts. The installation is very simple and does not require any parameterization. No indicators are required as an ion-selective sensor which is used for the measurement. This electrode is also the regular spare part, which can be easily changed without tools. Further maintenance work is generally not required. Process reliability is improved thanks to the integrated self-monitoring.

Softcontrol RM monitors the soft water produced by the softener for increased hardness concentrations and also triggers the regeneration of the softener in terms of quality. The monitoring of variable water hardness limit values from 1 ppm to 18 ppm takes place as well as the quality-controlled triggering of the regeneration of two columns of the softener. A continuous measurement takes place as long as water flows. Indicators are dispensed with and low-maintenance ion-selective sensors are used instead. The device has self-monitoring so that, in the event of service, information is provided automatically for less maintenance. The measured values are output on the display, via a 4 to 20 mA current loop and via a LAN data interface with Modbus / TCP. The data is also saved in the electronic operating log (USB stick). Installation and parameterization is easy to carry out on the device.

Water hardness is influenced by changes in raw water, flow, pressure and bypass valve. The continuous monitoring of the water hardness behind a blending system with Softcontrol V-UE is therefore of great importance. The device monitors the limit value of the water hardness of blended water on a water softener approx. Every 30 seconds. The limit value can be parameterized in the range between 18 ppm and 360 ppm. The data is shown on the display, saved on the USB stick and output via a 4 to 20 mA current loop. The integrated ion-selective sensor works without the use of an indicator. Installation is simple, the limit value can be parameterized and the sensor, as the only common spare part, reports that it is easy to replace if necessary.

Softcontrol Carbonate is used to monitor the decarbonised water after a decarbonisation system. If the parameterizable limit value is exceeded in the range from 9 ppm to 90 ppm, an alarm is triggered. the device measures approx. 2 times per minute with the help of the integrated ion-selective sensor. Thanks to its continuous analysis, it offers protection for downstream systems and their processes. In addition, the device system monitors itself and automatically indicates the simple change of the sensor without additional tools. The measured values ​​are shown on the display and output via the parameterizable 4 to 20 mA current loop.