Screws for plastics - Import export

These are the accessories use in printer ,use in internals.

These parts are used in printer accessories.

FEATURES AND BENEFITS Enhancement when compared with Polymate30: • The re-designed geometrical flank allows for the optimized movement of plastic material while initiating the fastening procedure. • Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. • At the same nominal diameter, up to 50% gain in torsional and tensile strength. • As there are a larger core and reduction in the thread pitch length, shorter fasteners and/or smaller diameters may be used. • Improved pitch provides added vibrational safety.

Delivery program: Plastic Screws From M3 x 20 mm to M10 x 60 mm. Plastic Knurled screws DIN 653 from M3. Plastic Transverse-hole screws DIN 404 from M3 x 20 mm. Plastic Nuts From M3 Plastic Threaded pins DIN 551 from M3 Connection elements Other connection elements such as discs, caps, spacers and diverse articles moulded from all commercially available plastics (granulate). All articles are available with the specifications listed next. Materials: Articles moulded from PA, POM and all other plastics (granulate) commonly available on the market. Standards: According to DIN/EN/ISO or drawings. Colour: According to RAL table or individual customer wishes.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

is a thread-cutting fastener designed to meet the demanding requirements of thermoset plastics with easy assembly coupled with a strong, reliable joint to ensure optimized assembly performance. Provides an asymmetrical 30º thread profile, inclined towards load surface to increase friction (FR) between the application and the fastener Reduction in radial stress Reduction in back-out caused by relaxation Increase in strip resistance Elimination for the need in supplementary locking devices Optimal thread pitch allows for deeper thread engagement Increase in pull-out strength Increase in resistance to vibration loosening Increase in load-carrying capability The recessed thread root allows space for displaced material Minimization in installation torque Miniziation in the risk related to clogging and galling of threads during assembly The shank slot minimizes chip production Through hardened to Rc 33-39

is engineered for direct assembly of thin walled and flat designed thermoplastic components. Direct assembly using the Polymate30 Screw makes thin walled and flat designs possible. This leads to material savings and reduced cycle times during injection moulding. Therefore, the quality of the Polymate30 joint and the fastening component, translates into a considerable cost saving overall.

is a special fastener designed for reliability and an easy direct assembly into thermoplastics. Enhancement when compared with Polymate30: The re-designed geometrical flank allows for optimized movement of plastic material while initiating the fastening procedure. Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. At the same nominal diameter, up to 50% gain in torsional and tensile strength. As there is a larger core and reduction in the thread pitch length, shorter fasterners and/or smaller diameters may be used. Improved pitch provides added vibrational safety. SOMETIMES SMALLER IS BETTER The visuals below show the advantages of a reduced fastener length and diameter by comparing Polymate30 to Polymate20. Substitute A provides a reduction in length, whereas Substitute B provides a reduction in diameter. For both scenarios, the reduction in pitch from the Polymate20 provides a maintainted thread flank.

Universal bottles for storing, packing, lab, taking samples, sampling and transport of liquids.

The reagent bottle is particularly suited for storing, packing, taking samples, sampling and transport of granules and paste-like media.

Universal bottles for storing, packing, taking samples, sampling and transport of liquids.

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

for rods up to 13 mm Ø*nickel plated brass screw*with plastic handle

For compounding and reactive process, JSW propose “TEX-αⅢ” series. TEX-αⅢ has the world’s highest level torque (Td = 18.2 Nm/cm3) with deeper Do/Di ratio (1.57). The highest torque of TEX-αⅢ makes it possible to operate the extruder with lower screw speed comparing with the existing extruder. As a result, TEX-αⅢ can realize the lower energy consumption and lower discharge temperature. TEX-αⅢ has 9 line-up from TEX25αⅢ(screw dia. 26.5 mm) to TEX120αⅢ (129.5 mm). For the isolation process after polymerization, we provide devolatilization extruder which has multi vacuum vent ports in order to remove residual solvent and/or monomer in the material polymers. JSW also provides the mechanical dewatering twin screw extruder for plastics, rubber and elastomer.

4 or 5-pin socket Straight or angled Connection with screw clamps Plastic housing

Novelis’ fracture-proof, seamless aluminum bottles offer needed protection when transporting and storing sensitive and critical goods. Novelis produces aluminum bottles for a range of applications — from commercial use to United Nations-approved packaging — in several coating configurations and sizes with fill capacities ranging from 38 ml to 6250 ml. These bottles include rolled thread for screw stoppers, tamper-proof seal and screw closure, plastic screw closure and locking ring, plastic threaded ring for pilfer-proof closure and flex-spout closure system.

Tecnimodern automatic counting and weighing machines allow you to count and weigh different parts such as screws, nuts, washers, parts (metal or plastic), dowels, small hardware, confectionery. Thanks to the simple set-up, you can switch from one type of part to another in a few seconds. The frame counting cell, controlled by the PLC and equipped with a filter, counts only parts and no waste. Weighing is performed by a calibrated scale. The control panel allows very easy access to the settings and displays errors in plain text.

Our WindSign "Seal" is designed for permanent outdoor use. The folding technique of the frames guarantees a quick change of the posters. A circumferential sealing rubber mounted on the rear walls prevents water from entering. The rear walls are also made of weather-resistant polystyrene. The anti-reflective covers made of UV-stabilised material prevent the posters from fading. The installation of the customer stopper is very easy. The frame is simply screwed to the plastic base and the stand is ready for use. The high stability of the Wind Sign is guaranteed by the fillable base and the special spring technology, so that the stand can also be used in stormy weather. Thanks to the wheels integrated in the base, the WindSign "Seal" can be moved easily to the desired position.

The Irus connection systems are especially suitable for connecting glass panels. The glass panel connectors are equipped with plastic screws so that the glass cannot be damaged. The glass panel does not require drilling as the clamping screws can be tightened and thus fix the glass panel. The glass panel connectors can clamp varying panel thicknesses of 3-5mm, 5-8mm, 10-13mm and 13-16mm. The robust structure of the glass panel connectors makes them suitable for using outdoors.

OKS 1105 prevents the formation of electrically conductive layers and minimises the risk of flashovers and dielectric losses. The insulators and switchgear covered with the paste thus maintain a good insulation resistance. Sealing lubrication for electrical or electronic equipment such as relays, plug-in connections, cable lugs and lamp sockets Protection of insulators and switchgear in humid atmospheres, for example of junction boxes, screw terminals, overload cutouts at high-voltage pylons, connecting cables and terminal connections Lubricant for plastic screw connections and other moving parts of metal, ceramic, plastic Advantages and benefits Excellent water repellent properties Excellent surface wetting Good adhesion on glass, porcelain and plastics Stable consistency across a wide temperature range Very good resistance to chemical and weather-based influences (e.g. ozone, UV radiation) Neutral with regard to many materials

• For short, straight and figure cuts, small radii • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For straight cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For uninterrupted, straight and figure cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For short, straight and figure cuts, large radii • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For straight cuts • Cutting edge hardness 56-58 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For straight cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles coated with plastic • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened