Stainless steel ball - Import export

Sturdy and practical galvanized or stainless steel linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The shaped raceway rail, the flat raceway rail and the telescopic rail are available in stainless steel or galvanized sheet metal. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces. Three rail width sizes: 20mm, 30mm and 45mm Standard rail lengths up to 3,120mm; different lengths upon request Low coefficient of friction Combination of T and U rails for self-aligning bearing applications Easily adjustable slider preload Polymer based wipers available for added roller bearing protection (available on for the thin body style slider) High temperature resistance up to 120°C/250°F The stainless steel X-Rail linear guide version is corrosion resistant, and ensures...

inch sizes The inch dimensions are finding their way into the range of xirodur® B180 polymer ball bearings! In combination with the PA cage and either glass or stainless steel balls, they offer a long service life and excellent value for money. They can be used in up to 80°C, are corrosion resistant and free from maintenance and lubricants. Nonmagnetic and washable Corrossion-resistant Predictable service life Lightweight Electrically insulating Application areas:Medical technology, plant construction, cleanroom technology, materials handling inch sizes The inch dimensions are finding their way into the range of xirodur® B180 polymer ball bearings! In combination with the PA cage and either glass or stainless steel balls, they offer a long service life and excellent value for money. They can be used in up to 80°C, are corrosion resistant and free from maintenance and lubricants. Nonmagnetic and washable Corrossion-resistant Predictable service life Lightweight Electrically insulating Application areas:Medical technology, plant construction, cleanroom technology, materials handling

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

xiros® B180 FDA for the food sector B180 is already the most successful range in the xiros® family, reliable and inexpensive. Now this range becomes a low-cost solution for the food industry. All dimensions up to Ø 25 mm are also available from now on in the FDA-approved version. For this, it is enough to adapt the cage of the polymer ball bearing, as the rings are already made from FDA-compliant material. Now xirodur® B180 ball bearings with stainless steel balls can be used anywhere in the unpackaged food processing/handling area and where temperatures do not exceed 80°C. Raceways and cages made ​​of FDA approved plastics Lubricant- and maintenance-free Washable For temperatures up to 80℃ Application areas:Food and packaging technology, handling technology, medical technology, cleanroom sector. xiros® B180 FDA for the food sector B180 is already the most successful range in the xiros® family, reliable and inexpensive. Now this range becomes a low-cost solution for the food industry. All dimensions up to Ø 25 mm are also available from now on in the FDA-approved version. For this, it is enough to adapt the cage of the polymer ball bearing, as the rings are already made from FDA-compliant material. Now xirodur® B180 ball bearings with stainless steel balls can be used anywhere in the unpackaged food processing/handling area and where temperatures do not exceed 80°C. Raceways and cages made ​​of FDA approved plastics Lubricant- and maintenance-free Washable For temperatures up to 80℃ Application areas:Food and packaging technology, handling technology, medical technology, cleanroom sector.

xiros® polymer ball bearing – now electrically conductive xiros® F180 polymer ball bearings offer protection against electrostatic discharge. In this type with ESD protection (Electro Static Discharge), the newsly developed ball bearing material xirodur® F180 is used. The new development is applicable up to +80°C and offers a long service life. Free of lubrication and maintenance. Electrically conductive (ESD protection). economical Lightweight. Industries:Semiconductor industry, handling, paper, textile and glass industries, etc., furniture industry etc. d1 [mm]: xiros® material - Material data xiros® polymer ball bearing design, applications, development and testing xiros® chemical resistance xiros® F180 polymer ball bearings offer protection against electrostatic discharge. In this type with ESD protection (Electro Static Discharge), the newsly developed ball bearing material xirodur® F180 is used. The new development is applicable up to +80°C and offers a long service life. Free of lubrication and maintenance. Electrically conductive (ESD protection). economical Lightweight. Industries:Semiconductor industry, handling, paper, textile and glass industries, etc., furniture industry etc. PA-cage made of xirodur® F180, stainless steel balls -40°C to +80°C d1 [mm]:

xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range Cage: PEEK PA Balls ES = stainless steel GL = glas PAI = Polymer xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Stainless steel floats as individual level sensors for float switches as ball floats, jacketed floats or in cylindrical form. The areas of application are for high temperatures / for highly aggressive media / for high pressures / for explosive media as level measurement and buoyancy bodies.

Stainless steel float hollow balls - with threaded mounting IG . The use of different sizes, shapes and materials optimises the use of PVA float valves in many applications. From the space-saving compact float made of high-quality HDPE plastic to the elaborate VA float body with individual fastening options, we can offer the right solution for almost every application.

Brass float valve with high filling capacity. This is the PVA Series 8 external thread open type. This float valve is combined with hollow float balls made of high-quality PE-HD plastic (max. 70 °C), alternatively also with copper or stainless steel balls.

Brass float valves of open design in 3 and 4 inches can be combined with our hollow float balls made of high-quality PE-HD plastic (max. 70 °C), alternatively also with copper or stainless steel balls. The chemical nickel plating provides corrosion protection.

The diaphragm float valves series F can be combined with our float hollow balls made of high-quality PE-HD plastic (max. 70 °C), alternatively with copper or stainless steel balls for high temperatures. This series has drinking water certification ACS, this grants the suitability of products with drinking water.

On request, we can supply ball caster tables / ball transfer units tables adapted to your individual requirements. We usually use sheet metal panels, which are manufactured, edged and welded on all sides, in accordance with your size specifications. The standard table models are galvanised, but can also be supplied with powder-coated surfaces in different RAL colours, in bright steel or stainless steel. Ball caster spacing patterns are manufactured in accordance with your individual requirements. We supply every size of table. In the case of surfaces larger than 2,000×3,000 mm, several table plates are put together to make one table. The ball casters / ball transfer units are mounted by means of press fitting and are easily replaceable. They can be mounted in rows or positioned alternately.

Stainless steel pipe connectors and ball joints are used for quick dismantling of two pipes. The ball joints offer the additional advantage of attaching the pipes at a special angle.

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed

Stainless steel hollow float balls - with duplex mounting made of AISI 316 - V4A in diameters from 90 - 220mm especially in combination with the float valve series stainless steel Diamond the float for highest demands on material, quality and workmanship. The duplex mounting is innovative and allows the attachment in 2 variants. On external thread and on float rods.

Stainless steel float hollow balls - with slotted seat for flat rod of the PVA PEKI float valve series. The use of different sizes, shapes and materials optimises the use of the PVA float valves in many applications. From the space-saving compact float made of high-quality HDPE plastic to the elaborate stainless steel float like this one with individual fastening options, we can offer the right solution for almost every application.

brass or stainless steel Vitonseal (FEP optional) builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed for simple applications for example hose reels PRESSURE MAXIMUM PRESSURE MAXIMUM 16 bar Stainless steel Brass PRESSURE MAXIMUM 16 bar Stainless steel Brass

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding track similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM 40 bar Stainless steel 100 bar Steel 42CrMo4 SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 315 bar DN 32 (1 1/4") DN 40 (1 1/2") 350 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") Stainless steel 100 bar DN 32 (1 1/4") DN 40 (1 1/2") 160 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") PRESSURE MAXIMUM Steel 42CrMo4 315 bar DN 32 (1 1/4") DN 40 (1 1/2") 350 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") Stainless steel 100 bar DN 32 (1 1/4") DN 40 (1 1/2") 160 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed short length SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") DN 350 DN 400 DN 500 DN 600 DN 700 DN 800

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 16 bar DN 350 DN 400 DN 500 DN 600 DN 700 40 bar DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") Stainless steel 6 bar DN 350 DN 400 DN 500 DN 600 DN 700 16 bar DN 125 (5") DN 200 (8") DN 250 (10") DN 300 (12") SIZEDN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") DN 350 DN 400 DN 500 DN 600 DN 700

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 100 bar DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") 250 bar DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") 350 bar DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") Stainless steel 40 bar DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") 100 bar DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding track similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM 40 bar Stainless steel 100 bar Steel 42CrMo4 SIZEDN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

The neutralisation unit Neutrakon® SN90 is suitable for the neutralisation (increase of the pH value above 6,5) of acidic condensates of industrial condensing units up to 11 MW. Thanks to the single removable Neutra baskets, maintenance work is easy. The innovative matrix improves the flow of the condensate Made in stainless steel type 4VA With ball valve for easy maintenance Suitable for condensates of industrial heating units, CHP and flue gas systems up to 11 MW (1500 l/h)