Results for
KEBA FASTENINGS
Germany
are bolts hot forged from all common materials including stainless, acid resistant and heatproof (inductive hardening, case hardening, quenched and tempered) steel. Diameter range of M 12 - M 80 with lengths reaching up to 800 mm. Tailored manufacturing according to specific standards, drawings and samples.
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
Case Hardening Steels & Steels for Quenching and Tempering EN 10083-2 Unalloyed Steel (C 35/C40/C45/C60, C22E – C60 E+U, +N) EN 10083-3 Alloyed Steel (25CrMo4, 34CrMo4, 42CrMo4, 51CrV4, 20MnB5, 30MnB5…) EN 10084 Case Hardening Steel (16MnCr5, 20MnCr5…)
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
We supply both from stocks and productions wide range of round bars , certified acc to. EN 10204 2.2 and/or 3.1 Steels for General Use of EN 10025 (S235/275/355 JR/J0/J2) Steels for Quenching and Tempering acc. EN 10083-2, EN 10083-3 Steels for Case Hardening acc. EN 10084 (C10, C15, 16MnCr5, 20MnCr5, 36CrMn5 (UNI7845) Micro-alloyed Steels (18MnV5, 20MnV6) Free Cutting Steels acc. EN 10087(11SMn30/11SMn37) Other Grades upon request. Structural Steel Carbons Steel Case Hardening Steel Heat Treated Steel Spring Steel Free Cutting Steel Tool Steel Stainless Steel
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
Unalloyed structural steel according to DIN EN 10025-2 (S 235/S275/355 JR/JO/J2/K2 +N/M/AR ) Fine grained structural steel according to DIN EN 10025-3 (S275/355/420 /460 N/NL …) EN 10025-4 Thermo-mechanical Rolled Structural Steels (S 275/355/420/460 ML ) EN 10025-5 Structural Steels with Improved Atmospheric Corrosion Resistance (S 235/355 JOW/JOWP/J2W/J2WP/K2W) EN 10025-6 High Yield Quenched and Tempered Fine Grain Steel (S 460/690/890/960 Q/QL/QL1)
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
Due to the different thermal tempering, steel shot blasting abrasives type WIWOX® SK obtain different hardness classes from 40 – 43 HRC, 54 – 60 HRC up to greater than 61 HRC. Because of the different degrees of hardness, the steel shot in the operating mixture keeps its angular shape or becomes round during the application process.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
This material group stands for breaking strength, service life and wear resistance. Due to these properties, quenched and tempered steel is always used where high strength, yield strength and high toughness are required for highly stressed machine parts. C 22 E, C35 E, C 45 E/➔ according to DIN EN 10132 - 3 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
JDN Air Hoists PROFI 3 TI up to PROFI 100 TI also available as hydraulic hoists. PROFI 3 TI JDN Air Hoists PROFI Carrying capacities: 250 kg up to 100 t Air pressure: 4 bar or 6 bar Standard Features suitable for application in hazardous areas (Explosion protection) sensitive infinitely variable speed control for the precise positioning of loads easy operation suitable for lube-free operation frequent switching and extended duty cycles low maintenance low headroom, lightweight sound absorption insensitive to dust, humidity and temperatures ranging from -20°C up to +70°C from 1 t upwards with overload protection (EC-version) Technical Details fail-safe starting conditions, low maintenance vane motor chain sprocket in the mid section runs in dust proof maintenance free ball bearings planetary gear in long life grease lubrication, all teeth made of tempered or hardened high grade steel chain and hook of high quality tempered steels with a breaking strength of five times the...
Request for a quoteFRIEDR. FREEK GMBH
Germany
Advantages of Heating Plates with Square Cartridge Heaters: -> Simple plate manufacture due to rectangular groove geometry, no deep-hole boring -> Simple heater installation by bending and pressing along the plate surface -> Complex plate geometries with bores and openings -> Optimal heat transfer due to 75% surface contact -> No casting with heat conductive compound -> Uniform temperature profiles due to thermally optimized groove layouts/power distribution and utilization of insulation plates -> high process temperatures (up to 450°C in aluminium, up to 700°C in stainless steel) Example "Heated Stamp": D=100 mm out of tempered tool steel up to max. 700°C continuous temperature. Fitted with 2 Square Cartridge Heaters 1500 W/ 230 V, 4,5 x 4,5 mm x 600 mm, with 50 mm unheated at the termination end. Annealed and formable with a nickel sheath, resistant up to 850°C surface temperature. Connection by fibreglass insulated pure nickel high-temperature leads (max. 500°C)
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
We take the right turn! In the area of turning technology we can offer you a spectrum of prototypes, zero series and small series as well as the production of large series as a powerful partner. We process all materials, e.g. Such as automatics, tempering, stainless steels, aluminum, brass, copper and more! Max. Diameter when working rod and / or coil: Ø 65 mm Max. Diameter when machining sections: Ø 380 mm Max. Working length: 500 mm All common heat- and surface- treatments possible Assembling and more…
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
We supply the European and international market with cold heading wire / cold extruding steel in sizes ranging from 1.5 mm to 42 mm Production is based at the Hamm and Iserlohn sites, focussing on the following products: Cold heading wire / cold extruding steel Tempering steel Quenched and tempered steels / AFP steels Prehardened steels
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
We supply the European and international market with spring steel wire for temperable springs from our Iserlohn-Kalthof plant in sizes ranging from 7.0 mm to 40.0 mm
Request for a quoteRONIX GMBH
Germany
Ronix Maxi RH-1368 Long Nose Pliers perform as expected of a long nose or needle nose plier. They are 8′′ (200mm) in size and allow operators to work precisely. The modern design of the jaws, as well as the hardened and tempered drop-forged steel and TPR handles, are just a few of the features that make these pliers ideal for bending, shaping, and cutting. Long nose pliers are unique in that they can bend, cut, and grip where fingers and other hand tools cannot. This hand tool could be useful for electricians, network engineers, jewelry makers, and anyone who needs to cut and bend wires, cables, and metalworks. Even if you're not on this list, you should have a pair of these long-nose pliers in your toolbox. To know more about RH-1368 scroll down and read the ‘detailed description’.
Request for a quoteHEINZE & STRENG GMBH
Germany
The drawing cones are characterised by an extremely good wear behaviour, high density, as well as fine-grained structure and a very smooth and pore-free surface.
Request for a quoteHEINZE & STRENG GMBH
Germany
For our carbon fibre bows, we offer wire guide elements for custom equipping made of: ceramic- carbide- tempered steel and special roller designs
Request for a quoteHEINZE & STRENG GMBH
Germany
Easy monitoring of the wire guide. Free discharge of abrasion dust and contamination. Wear plate eliminated, so the wires cannot get stuck or torn off. Wire guides can be replaced even when the bow is installed. Various wire guide options are possible: tempered steel, ceramic and carbide.
Request for a quoteHEINZE & STRENG GMBH
Germany
Unique bow design according to the T-beam principle. This allows enormous weight savings (about 40%) without loss of robustness. Lower weight makes handling easier during replacement. Maximum energy savings and longer rotor bearing lifespan thanks to extreme weight reduction. Additional cast steel strands in the bow edges provide optimal protection in the event of wire breakages – especially with hard wires. Wire guides depending on product and customer requirements: Roller, ceramic, carbide or tempered steel guides possible.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RHODIUS ABRASIVES GMBH
Germany
Special technologies: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Ceramic grain fibre disc – the grain enables superior stock removal performance in a short period of time with a very long lifetime. • Especially suitable for hardened and tempered steels, tinder areas and titanium • Perceivably faster stock removal • Long lifetime
RHODIUS ABRASIVES GMBH
Germany
Special technologies: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Quick and aggressive grinding with very high stock removal performance, thanks to a large contact surface and extra-long flaps. • Ceramic grain offers high stock removal performance • Especially suitable for hardened and tempered steel, tinder areas and titanium • Particularly good for edge grinding
RHODIUS ABRASIVES GMBH
Germany
Special technologies: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Ceramic grain fibre disc for the quick change system – the grain enables rapid and superior stock removal performance. • Especially suitable for hardened and tempered steels, tinder areas and titanium • Perceivably faster stock removal • Quick tool change without bonding or sliding
BKM PRÄZISIONSWERKZEUGE STANZ UND BIEGETEILE GMBH
Germany
LMT TOOL SYSTEMS GMBH & CO. KG
Germany
High feed and short machining times are the advantages of the LMT Fette MultiEdge 2Feed mini in a nutshell. High removal rates are achieved especially when machining hardened or high-tensile materials, even with large projection lengths. These results are delivered by the proven high-feed geometry of the 9 mm small indexable inserts, their positive rake angle, the new LCK10M cutting material with high carbide content and the TiAlN-based high-performance coating. The machining of high-tensile steels up to 63 HRC and chilled cast iron up to 67 HRC presents no problem. The machining time for one type of tempered steel was almost half that of a competitor tool.
Request for a quoteWESTMARK GMBH
Germany
• small, compact, easy to store in the drawer • fine chrome-plating • transport wheel and knife from special, tempered steel
Request for a quoteIWIS ANTRIEBSSYSTEME GMBH & CO. KG
Germany
Bush conveyor chains are often used for conveying tasksinvolving long transport distances at relatively low speeds. Since only a small minority of chains used in the industry are totally compliant with one specific standard, ELITE conveyor chains are custom-made to a specific customer order and consequently fulfil a large number of special requirements. ELITE highlights: • Pins usually made of heat-treated alloy steel, inductionhardened • Bushes made from seamless precision steel tube, case-hardened • Link plates made of high-strength tempered steel or case-hardened steel alloy • Rollers (where present) made of case-hardened steel, case-hardened
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: round Material: 42CrMoS4 (1.7227) Method of production: cold drawn, peeled Surface finish: mill-finish Condition: quenched and tempered Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010312 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 10 - 100 Length (mm): 3,000 - 6,000
Request for a quoteC. AUGUST HÜCHELBACH GMBH & CO. KG
Germany
Quenching und tempering of tool steels primarily for the saw- and knive industry. Many reputable saw- and tool companies are taking advantage of our highly developed heat treatment service which is well known in several countries arround the world.
Request for a quoteResults for
Steel tempering - Import exportNumber of results
27 ProductsCountries
Company type
Category