Steel tubes - Import export

KAUP Carrying Rams T185 in steel tube version can be found on forklift trucks wherever tubes, coils or other material wound on cores are transported. Carrying Rams with capacities of up to 80 tons can be found in the KAUP product range.

Volume booster for large pneumatic actuators to reduce the positioning times. Simple and universal mounting possible with NAMUR mounting plate. Through adjustable gain, the booster can be adapted to the capacity of the actuator.

Strainer for protecting downstream plant components against contamination. All parts in contact with the media are made from stainless steel, therefore it is also suitable for aggressive media.

Robust stainless steel check valve with high flow capacity for aggressive media and high operating temperatures.

Guide tubes for solenoid valves, deep-drawn from stainless steel. Tightest tolerances, high quantities

Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery

Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery

Our stainless steel pipes offer the following characteristics: pipe ends deburred quantity delivered in accordance with customer’s specifications well and protective transport packed

In pneumatic conveying systems, conveying abrasive products – in particular at high conveying speeds – leads to abrasion and thus to wear in the pipe bends. In order to prevent this, the pipe bend of our highly wear-resistant DWR double-skin stainless pipe bends is encased in a second pipe bend, which creates a double-walled chamber. This acts, so to speak, as a “protective shield”: After the wear has taken place on the internal pipe bend, it fills with the product to be conveyed. When this process is completed, you are then conveying „product on product“ – and no further wear is possible! Version I: „Product-on-product” In this variant, the classic “double skin” comes into effect. not suitable for foodstuffs not suitable for material change Version II: „Lined with concrete” lined with extremely hard concrete colour: light grey not suitable for foodstuffs also available: lined with borosilicate glass

We can supply you with highly wear-resistant stainless steel pipe bends which have a service life 10 to 20 times longer than that of standard stainless steel pipe bends. This high degree of wear protection is required, for example for conveying fibreglass-reinforced plastic granules or similarly abrasive media. suitable for use of highly abrasive products easy installation no stepped pipe couplings and no flange connections required safe for use with food

Stainless steel pipes from HJS for individually adapted exhaust systems. Here you get angles, meter pieces to create an individual exhaust system or manifold.

Our speciality are thin-walled pipe-bends with large bending radius, especially for pneumatic conveying systems. The pipe-bends are cold-bent without any pleats on CNC-mandrel machines. Our quality management generally guarantees: welded seam smoothed or shaved (DIN 11 850 resp. DIN 17 457) absolutely wrinkle-free, no start-up bulges no scratching or scoring extremely low ovality visually aesthetic surface leg extension each side deburred sawing edges

Whether chassis applications with high dynamic stress and safety-relevant functions or lightweight solutions for the highest crash requirements. Our claim is to find the technically and economically best solution for your individual requirements

stainless steel*finger grip*length 130 mm*up to 30 mm Ø

The advantages to you: no more deformation of roundness when cutting bends on site easier extension-pipe/tiered pipe bend construction appealing visually pickled surface All of our pipes and pipe bends (both unannealed and annealed) are made of the following material: stainless steel pipe, material no. 1.4301 (AISI 304) longitudinal seam welded pipes hot rolled & cold rolled coils, unannealed, with or without pickling (W1) Make: IltaInox and/or Marcegaglia

Universal solution when different hose diameters have to be welded together. These step connectors are mostly used for accessory exhaust systems with larger diameters.

The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

galvanized steel wire*clay tubes

Tubing Stainless steel

Stainless steel tubes have become an indispensable part of everyday life. We hold onto them on the bus or use them as railings in houses. In the furniture industry, stainless steel tubes are used as wardrobe rods and as components for furniture. In their largest form, they serve as pipelines for oil and gas.

stainless steel*for 50 test tubes

Flexible information terminal for the POS / POI consisting of a 21.5 inch multi-touch PC with Android operating system and a stand. The powerful processor enables many individual application possibilities "stand-alone" or internet-based. The stand, made of an oval silver-coloured steel plate and 2 brushed stainless steel tubes, ensures a secure stand.

We will provide you with pipe couplings for different outer tube diameters e.g. to connect glass bends with stainless steel tubes. DVK-6 pipe couplings for suction conveying can be delivered in the following sizes: 47.0 to 40.0 mm 56.0 to 50.0 mm 66.0 to 60.3 mm

As per the norm EN 10297 specifies the technical delivery conditions for seamless round steel tubes. The tubes for mechanical applications are mainly used in those processes in which turning and CNC machines are used. The wide size range available, with OD from 21.3 to 812 mm, gives the possibility to manufacture several kinds of components for different applications: small machine parts, flanges, fittings, Archimedean screws, hydraulic cylinders for heavy machines etc.

This display stands out even in the dark. It is mounted by means of steel reinforcing tubes (Ø 74 mm, galvanized), which are included in the scope of delivery and are concreted 500 mm into the foundation.

• Cutting edges inductively hardened • With replaceable, screwed cutter head • Re-adjustable screw-joint • Tremendous cutting performance thanks to optimum leverage • Handles made of precision steel tube • Jaws made of chrome-vanadium steel, forged

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

Heavy duty cassette R7 for tube, V2A, 20 kN, floor covering thickness 25mm, as access unit according to EN 50085-2-2, for installation in round mounting opening in screed-covered trunking system and raised and cavity floors indoors, suitable for static loads up to 20 kN, for use in dry rooms with wet-cleaned floors according to DIN VDE 0634, height adjustable to top floor edge, consisting of: — Cassette with seal and inserted sheet steel cover, — cassette frame with integrated snap-in ladder for installation of 3 universal supports UT3 for 9 single installation devices with support ring/bracket or 12 Modul 45 devices, — 4 levelable supports. Classification according to EN 50085-2-2: — Application area: for wet floor care (6.101.3) in used condition. — IK protection class: IK 10. — Load capacity: 2-20 kN Material: — Cassette frame, cassette made of V2A sheet metal, 2 mm. — Insert cover: galvanized sheet steel, 8 mm.

Heavy duty cassette 9 "for tube", V2A, 10 kN, floor covering thickness 21 mm, for installation in square mounting opening in screed-covered trunking system and raised and cavity floors indoors, suitable for static loads up to 10 kN, for use in dry rooms with wet-cleaned floors according to DIN VDE 0634, height adjustable to top floor edge, consisting of: — Cassette with installation opening for tube, with seal and inserted sheet steel cover, — cassette frame with integrated snap-in ladder for installation of 3 universal supports UT4 for 9 single installation devices with support bracket or 12 Modul 45 devices, — 4 levelable supports. Material: Cassette frame, cassette made of V2A sheet metal, 2 mm. Insert cover: galvanized steel sheet, 8 mm. Depth of the recess in the cassette for the floor covering in mm: 21. Required mounting opening in mm: 244x244 mm. Required minimum installation depth: 132 mm. Leveling range: +18 mm.