Strainers - Import export

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Advantages Simple, compact design Area of application Various filter sizes and the modular design enable any required flow rate. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S9 Filter aid - Filtration degree 10 µm - 5 mm Medium Oil, water Filter material Perforated Plate Cylinder

Advantages Simple, compact design Area of application For the filtration of all types of liquids; protection filter for pumps and volume meters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S8 Filter aid - Filtration degree 10 µm - 5 mm Medium Oil, water Filter material Sieve Disk

We produce basket filters and wire basket inserts of any kind according to customer specifications. Normally perforated plates with round or square perforation as well as wedge wire elements serve as base bodies. The filter baskets are lined inside or covered outside with plain or with pleated wire cloth, according to customer requirement.

We produce filter elements in a virtually unlimited variety: plain or pleated, cylindrical or conical. They are used for the filtration of gaseous and liquid media.

Application To avoid measurement errors and damage by foreign objects carried in the medium. Reliability Complete emptiying of conical design and drain plug at the lowest point of the filter (filters in cast). Special features Low pressure drop due to large filter surface area (up to 16 times the pipe crosss-section) Flexibility • DN15 to DN400 • -200 °C to +300 °C • to 3.000 m³/h • to PN100 • different materials

Genuine DEUTZ

Strainer

• ideal for use with tea or spices, fine-meshed • with spring clap mechanism for easy filling

Strainer for protecting downstream plant components against contamination. All parts in contact with the media are made from stainless steel, therefore it is also suitable for aggressive media.

Tank strainer for tank for wheel loader FERRUM. Will be delivered like shown.

Due to the required hydraulic oil resistance, PES/PET fabrics and injection moldings made of PA6-GF25 or PA66-GF30 are mainly used. For higher temperatures or pressures, calendered stainless steel mesh is also used.

For strainers and fine filters in the drinking water sector, stainless steel mesh and plastics with drinking water approval (for example according to KTWBWGL, DVGWW270WRAS, NSF, ACS...) are used, mainly POM, POMGF30, PP, PPGF30, TPE.

Sieves, strainers and filter elements are manufactured by injection molding Either a plastic mesh or a metal mesh is placed inside the mold and overmolded with plastic. We focus on small and medium quantities from manual to semiautomatic series production.

It is also possible to assemble seals and/or other components such as valves, flaps and springs onto our filter screens to form small assemblies. When joining plastic parts, clip connections are mostly used.

Depending on the application, PA66, PE/PES or stainless steel meshes are used, with PA6-GF25 or PA66-GF30 usually used as the body material. For special liquids such as Ad-Blue, POM is used because of its better resistance to Urea.

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

Type: SIL Manufacturer: Alfa Laval Description: Rotary brush strainer

Type: BSC 200 Manufacturer: GEA Westfalia Separator Description: Rotary brush strainer

Type: BSB 200 Manufacturer: GEA Westfalia Separator Description: Rotary brush strainer

Type: BSB 100 Manufacturer: GEA Westfalia Separator Description: Rotary brush strainer

Type: BS 85 Manufacturer: GEA Westfalia Separator Description: Rotary brush strainer

Type: BS 170 Manufacturer: GEA Westfalia Separator Description: Rotary brush strainer

Type: BS 125 Manufacturer: GEA Westfalia Separator Description: Rotary brush strainer

• with wide stainless steel brim • the long handle and the well-worked out wire loop make sure that the sieve sits well on pots and bowls

• shapely and handy • for modern kitchens

CHARACTERISTICS For clamp mounting into the pipeline Efficient protection of dirt-sensitive system components during commissioning Low differential pressure Easy installation and replacement Material Certificates DIN EN 10204/3.1 for Clamp Collar OPTIONS For DIN and ASME flange connections Design for low temperature down to -50 ° C Design pressure up to 100 bar Stainless steel construction Reverse flow direction GENERAL The starting screen VAS is used for commissioning and starting a system in order to clean gas from coarse soiling such as welding bead, scale, grease, etc. After starting, the starting screen can be removed from the pipeline. The design is carried out as a welding design. FUNCTION The starting screen VAS consists of a supporting basket made of perforated sheet metal with a welded clamping ring. These are galvanized after assembly. On the outside of the support basket a stainless steel wire mesh is welded.

Technical data Deisgn Y-strainer, body FBE-coated. Face to face EN 558-1 Row 1 Connection Flange DN25 … DN200, PN16 drilled, Flanges DN65 – PN16 will be delivered in 4-hole execution! Mounting position In horizontal pipes with below hanging top cover, observe to the flow direction! Pressure Range PN16 Temperature Range 0°C … +80°C Mesh Normal filter: Ø1,0mm, DN25 … DN65 Ø1,2mm, DN80 … DN200 Fine filter: Ø0,25mm Material Body: GGG-50, FBE-coated Cap: GGG-50, FBE-coated Filter: Stainless steel 1.4301 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!