Waterproof - Import export

Flexible, crack-bridging two-component waterproofing. As a flexible waterproofing in interior and exterior areas for the creation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 250 Flex is a universally applicable flexible Waterproofing slurry for a wide range of applications. Due to its high waterproofness and resistance, it can even be used with corrosive media. Packaging unit: 10 kg bucket, 240 kg per pallet, other packaging sizes on request – Article-No.: 1315

One-component mineral filling and reprofiling mortar for the preparation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 240 is a universal waterproofing mortar for a wide range of applications. The material is an ideal supplement for waterproofing work in thicker layers and can be used in combination with Maleki-DS 220. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1329

One-component mineral waterproofing slurry. For the preparation of a waterproof coating on concrete and other cementitious substrates. Maleki-DS 220 is a universal waterproofing mortar for a wide range of applications. Thanks to its high waterproofness and durability, it can be used even under the most difficult conditions. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1314

The IP67 D-SUB SlimCon series are supplements to the IP67 D-SUB connector family. The CONEC SlimCon series has a very compact design of IP67 sealed D-SUB connectors with a one-piece zinc die-cast shell. The panel cut-out for the CONEC SlimCon series corresponds to the standard of other D-SUB connectors and thus no new cut-outs are required and refitting from standard IP20 systems to the new IP67 system of the CONEC SlimCon series is possible. The one-piece zinc die-cast shell makes the new CONEC SlimCon D-SUB connector a mechanically extremely robust interface with reliable IP67 protection – similar to the CONEC Solid Body series. However, due to its design, a reduction of the occupied space from 48% to 52 % compared to a standard IP67 protected connector can be achieved. Owing to its compact design and the one-piece zinc die-cast shell, the CONEC SlimCon series is ideal for industrial and harsh environments.

Position indicator for telescopic spindle extension, electric, aluminium (13 – 1390 U/Stroke)

Telescopic Spindle Extension T3 - waterproof. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329, square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150 N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and flange bell (F10). Completely dirt-proof and water-repellent.

surface protection for concrete, crack filling, hydrophobic impregnation

Safe - fast - easy: these are the key properties of the KURO PEHD underground tube programme. This is the only absolutely watertight underground pneumatic tube that doesn‘t require a forwarding tube because the carriers travel directly in the specially dimensioned system.

This double-sided A-board is equipped with 2 waterproof poster pockets instead of the normal covers, so that your posters are optimally protected against rainwater. Furthermore, the back panels of this poster display are made of weather-resistant polystyrene. The poster stand thus defies all wind and weather. The uniform, high-quality look of the rainproof poster stand is ensured by the silver anodised click frames and the silver anodised base frames. The click frames are made of the 30 mm aluminium profile. To change the advertising media, the 4 frame profiles of the pavement stand are opened. The poster pocket is removed and the insert is replaced. After the exchange, the poster pocket is put back into the A-board and the profiles of the click frame are closed again. The poster exchange is done. Due to the use of waterproof poster pockets, the 30 mm profile creates a free space between the poster and the frame for technical production reasons.

The winter jacket for women with high visibility colours (orange / black or yellow / black) is designed and tested by women for women. This jacket stands out from the crowd with its exclusive design and outstanding features. The winter jacket is available in the following sizes: XS, S, M, L, XL, XXL and XXL.

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Fish transport bags have been developed especially for the safe transport of ornamental fish. Different quality features of these bags make sure that the animals are doing well during the transport and arrive safely at their final destination. With its round bottom, there is no risk of physical injury for the fish in the bag. Waterproof single or double welded side seams protect the sensitive freight. All fish transport bags can be blocked and equipped with a tear perforation – for easy and quick handling. You will find our fish transport bags in almost every DIY and garden store, in pet shops and aquaristic stores. We look forward to your inquiry by mail or by phone: +49 (0)9181/2960-0!

Rolling and friction bearing lubrication, even at high temperatures Lubrication for bearings with contact to cleaning agents or disinfectants For mechanical units such as levers, joints and hinges, also under strong water effect Advantages and benefits NSF H1 registered High shear stability prevents thinning out of the grease under extreme mechanical loads such as during vibrations Excellent wear protection and very good high-pressure properties The calcium sulphonate complex soap ensures excellent water resistance and very good corrosion protection Broad temperature application range (-30°C to +160°C) High temperature and oxidation stability through fully synthetic base oil Very high resistance to water-alkaline or acidic disinfectants and cleaning agents Also available as spray version OKS 481 MOSH/MOAH-free

The pavement WindSign "QS I" was technically updated and is now available as pavement WindSign "Seal". The stronger cover foil is fixed with screws on the top profile and cannot slip down anymore. The covers can still be exchanged if necessary. Two sticky pads are implemented in the upper part of the frame. Those make sure that your posters will be held in place during installation. Of course the pads are reusable. The optimised poster stand comes in new visual appearance. All pavement signs are made with a sturdy back-wall and 2 non-glare, UV stabilised front covers. The new sealant makes the display waterproof. The base can be filled with either water or sand and is movable on 2 wheels when tilted. The strong springs allow for the highest grade of stability even in “stormy” weather conditions. Posters can be exchanged quickly by opening the aluminium click frame profiles. The header board is inserted into the upper groove of the pavement sign and fixed with screws.

The uniform, high-quality appearance of this triangular stand is ensured by the silver anodised click frames and the silver anodised aluminium round tubes. The simple assembly is done by screwing the 3 click frames to the 3 stable ø 60 mm aluminium legs. In order to effectively protect the inserted posters from rainwater, a circumferential sealing rubber is mounted on the weather-resistant metal rear walls, in addition the cover foil is glued to the rear wall on a short side. The cover foils used are made of non-reflecting, UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflection coating of the films ensures that the inserts are much easier to read even in sunlight. The posters can be changed quickly by opening the click frame profiles at the front. The highlight of this display is that the complete rear wall with foil can be removed for even easier poster changing.

The quality winner among the rainwater resistant A-bords! This rainwater-resistant pavement sign is ideal for outdoor use, for example in pedestrian zones. Through a consciously offensive orientation in these areas of application, the poster stand generates the highest possible level of attention. Thus, passers-by become potential buyers and the clientele is constantly expanding. The uniform, high-quality appearance is ensured by the silver anodised click frames and the silver anodised rack. In order to protect the inserted posters effectively against rainwater, a surrounding grooved rubber sealing is mounted on the weather-resistant metal back walls and on the covers. The anti-reflective covers are made of UV-stabilised material to prevent the posters from fading. Due to the folding technique the insert media, such as posters, can be changed easily and quickly. In order to be able to achieve an optimum clamping effect even after years, we always use springs made of spring steel.

Dustproof. Waterproof. Tough. Reliable. Strong cases and boxes for indoor and outdoor use – extremely durable and sturdy. Ideal for protecting high-quality items Robust due to the extra thick wall Waterproof sealing ring in the case lid provides reliable protection against dust and water Certified according to IP67

■ 1 and 2 channel drivers ■ Sensor protection class IP68 ■ Driver protection class IP40 or IP68 ■ Analog output ■ Low current consumption ■ High dynamics ■ High electromagnectic immunity

The price-performance winner among the rainwater-resistant A-stand! This rainwater resistant customer stopper is ideal for outdoor use in pedestrian zones or on the pavement. Through a deliberately offensive orientation in these areas of application, the poster outdoor stand generates the highest possible level of attention. This turns passers-by into potential buyers and the clientele is constantly expanding. The uniform, high-quality appearance is ensured by the silver anodised snap frames and the silver anodised frameworks. In order to effectively protect the inserted posters from rainwater, a rubber seal surround is mounted on the weather-resistant polystyrene back panels. The special profile technology used in this pavement sign also ensures extended protection. The anti-reflective cover sheets are made of UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflective coating of the films ensures that the inserts are much easier to read even in sunlight.

Our WindSign "Seal" is designed for permanent outdoor use. The folding technique of the frames guarantees a quick change of the posters. A circumferential sealing rubber mounted on the rear walls prevents water from entering. The rear walls are also made of weather-resistant polystyrene. The anti-reflective covers made of UV-stabilised material prevent the posters from fading. The installation of the customer stopper is very easy. The frame is simply screwed to the plastic base and the stand is ready for use. The high stability of the Wind Sign is guaranteed by the fillable base and the special spring technology, so that the stand can also be used in stormy weather. Thanks to the wheels integrated in the base, the WindSign "Seal" can be moved easily to the desired position.

Rolling and friction bearing lubrication, even at high temperatures Lubrication for bearings with contact to cleaning agents or disinfectants For mechanical units such as levers, joints and hinges, also under strong water effect Advantages and benefits NSF H1 registered (OKS 480 & OKS 481) High shear stability prevents thinning out of the grease under extreme mechanical loads such as during vibrations Excellent wear protection and very good high-pressure properties The calcium sulphonate complex soap ensures excellent water resistance and very good corrosion protection Broad temperature application range (-30°C to +160°C) High temperature and oxidation stability through fully synthetic base oil Very high resistance to water-alkaline or acidic disinfectants and cleaning agents MOSH/MOAH-free

Innovative waterproofing with high chemical resistance for canal and industrial construction. Waterproof up to 1.5 bar at a layer thickness of 4 mm. Maleki-SWP 270 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected against stress for longer against stresses that occur. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1312

Torque range from ± 0 - 0,01 Nm to ± 0 - 1500 Nm with speed or angle detection waterproof (IP67) contactless integral torque amplifier single supply voltage wide range of application small form low moment of inertia speed measurement (option) angle measurement (option) DRWPL series torque transducers are fitted with a number of gaskets in compliance with international protection IP67. The devices are also available with optional speed or angle detection for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V.