Joints - Import export

igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm Most important features: Very low weight High tensile forces Combinable with rod end bearings of the dimensional series E vibration dampening Noise dampening Available for left-hand and right-hand threads igubal® clevis joints are solid polymer made of igumid G according to DIN 71752, which can be combined with the rod end bearings of the dimensional series E as counterpiece. They consist of clevis joint, pin and circlip, or alternatively with spring loaded pin. igubal® spherical bearings application examples When to use it? When high stiffening is required When freedom from corrosion is desired When lubrication should not be used When you want to save weight When maintenance-free dry operation is desired When the easiest installation should be implemented When combinations with pneumatic cylinders and gas struts should be implemented When not to use? When temperatures above +200°C prevail When dimensions over 20 mm are needed igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm

robolink®-2-axial joint: Weight: 400 g max. load: pivoting 12 Nm, rotating 5 Nm Pivot angle: 180° (+180°/0°) Rotation angle: 340° (± 170°) Material: Fine polyamide PA 2200, VA screws, Dyneema ropes, aluminum HC bearing (alternativ iglidur® J) A = rotating ±270° | B = pivoting ±180° - 0° C = rope run

robolink®-based joint: Bearing ring rotation on the basis of PRT-01-50 iglidur® J gliding elements rotating on aluminium HC Weight: 1.250 g max. load: privot 20 Nm, rotate 10 Nm Pivoting angle: 180° (± 90°) Rotation angle: 180° (± 90°) Material: Fine polyamide PA 2200, VA screws, Dyneema ropes, aluminum HC bearing (alternativ iglidur® J) A = privoting ±90° B = rotating ±90°

DOF* rotating Can only be used as the first joint in a system. Material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) *degree of freedom Balls: DOF* rotating Can only be used as the first joint in a system. Material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) *degree of freedom Balls:

Oscillatory robolink® joint - optional with angle sensors material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) Balls: Oscillatory robolink® joint - optional with angle sensors material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) Balls:

igubal® - WGRM Angle joint for rotating and pivoting motions igubal® - WGRM igubal® low-cost angle joint Low-priced connection, many combination options igubal® low-cost angle joint igubal® axial joint AGRM For all mechanical combinations igubal® axial joint AGRM igubal® AGRM LC, AGLM LC Many combination potentials igubal® AGRM LC, AGLM LC igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints adjustable Fixed position spherical bearings, clearance- free movement of the ball pin adjustable Replaceable Reduce costs and time with removable ball pins Replaceable igubal® - WGRM Angle joint for rotating and pivoting motions igubal® - WGRM igubal® low-cost angle joint Low-priced connection, many combination options igubal® low-cost angle joint igubal® axial joint AGRM For all mechanical combinations igubal® axial joint AGRM igubal® AGRM LC, AGLM LC Many combination potentials igubal® AGRM LC, AGLM LC igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints adjustable Fixed position spherical bearings, clearance- free movement of the ball pin adjustable Replaceable Reduce costs and time with removable ball pins Replaceable

Category Compressed-air technology / Compressed-air couplings and accessories / Plug / Swivel joint plug Product number supplier 301081

Angle joints DIN 71802 material: steel, galvanized construction CS with spigots and flat, hexagon nut and locking strap Category Low pressure hoses and fittings / Joint technology / Elbow joints / Joints complete / With right-handed thread / Steel Product number supplier 220136

Angle joints DIN 71802 material: steel, galvanized construction CS with spigots and flat, hexagon nut and locking strap Category Low pressure hoses and fittings / Joint technology / Elbow joints / Joints complete / With right-handed thread / Steel Product number supplier 220136

Assembly immediately upon receipt of order - generally in stock assortment angle joints DIN 71802 The assortments contains: angle joints in different executions steel sheet box 340X240X55 mm ... Category Low pressure hoses and fittings / Joint technology / Elbow joints / Assortments Product number supplier 220100

Assembly immediately upon receipt of order - generally in stock assortment angle joints DIN 71802 The assortments contains: angle joints in different executions steel sheet box 340X240X55 mm ... Category Low pressure hoses and fittings / Joint technology / Elbow joints / Assortments Product number supplier 220100

Slip Joint Pliers are versatile tools that are used for gripping and bending hardware. These pliers come handy in many different tasks in all kind of jobs. Ronix RH-1190-1196-1198 Slip Joint Pliers are ergonomically-designed hand tool by Ronix for you to have in your tools collection. These pliers come in 3 different sizes and help you to complete many kinds of tasks in your house or even in your workshop.

Slip Joint Pliers are multi-purpose tools for grasping and bending hardware. These pliers are useful for a variety of activities in a variety of vocations. RH-1190-1196-1198 Ronix Slip Joint Pliers are an ergonomically designed hand tool by Ronix that you should have in your toolbox. These pliers are available in three sizes and will assist you in completing a variety of jobs around the house or in your workshop.

Slip Joint Pliers are multifunctional hardware grippers and benders. These pliers are useful for a wide range of tasks in a wide range of professions. RH-1190-1196-1198 RH-11 Slip Joint Pliers are an ergonomically designed hand tool from Ronix that you should have in your toolbox. These pliers are available in three sizes and will assist you in completing a variety of jobs around the house or in the workshop.

Consulting with Implementation for India and other Emerging Markets We have decades of experience with and in emerging markets, which helps you to avoid expensive mistakes, e.g. in Joint Ventures (JVs). Consulting for setting up internal IT/development organizations in India as an alternative to coutsourcing: A special focus is the establishment of internal IT/development departments or organizations in (South) India, especially in the Bangalore, Chennai and Pondicherry area, as a better alternative to classical outsourcing. Core competence is the selection of suitable Indian employees. European HR managers are usually not able to assess and evaluate an Indian CV correctly due to their lack of experience. Furthermore, they are not aware of the common weaknesses that Indian applicants have.

It relieves both human and the environment, and also preserves the valuable cutting tool. The ability to cut close to walls is outstanding. Thanks to its electric drive, joint cutting in indoor spaces is also among the special strengths of the COMPACTCUT 401 E, which is also characterized by maneuverability, durability and outstanding operator ergonomics. Whether cutting asphalt, concrete, making separation cuts, demolition work, tight construction sites or joint cutting in buildings - the powerful electric joint cutter with a 400-volt motor delivers excellent results under all conditions.

The versatile joint cutter CF 13.3 is particularly useful for light road repairs and for gardening and landscaping, especially due to his possibility of quickly and easily changing the cutting side. It features a reliable Honda GX-390 gasoline engine with cyclone air filter and a power of 8.7 kW. The cutting depth is up to 170mm and can be adjusted with a hand crank. The vibration-free push handle is also adjustable to provide comfortable handling of the machine.

Category Hydraulic systems, valves and components / Hydraulic cylinders / Accessories / Rod ends for rod Product number supplier 45510012

Category Hydraulic systems, valves and components / Hydraulic cylinders / Accessories / Rod ends for rod Product number supplier 45510010

Articulated pendulum joint for wheel loader FERRUM DM416 x4 . Scope of delivery as shown with seals as well as locking plate and screw connection

Introducing our unique, plant-based formula for mobile joints, firm connective tissue, and beautiful skin. This innovative combination of amino acids, phytodroitin with hyaluron, and acerola is vegan and free from preservatives, binders, and additives. Our amino acid complex, mimicking the body’s own collagen, is quickly absorbed, stimulating collagen production essential for joint protection and skin elasticity. Phytodroitin enhances skin hydration, supports connective tissue, and improves joint fluid viscosity, ensuring smooth movement. Sourced entirely from Europe and produced in Germany, our product is safe, allergen-free, and offers an attractive price-performance ratio. Experience high bioavailability and a slightly spicy taste without the risks associated with animal-derived products.

Joint Holder HSG Connections: M5 ... M16 G1/8 ... G1/4 Joint holder for adjustmentof the padsto curved surfaces

Genuine DEUTZ

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.